Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Name: Radiator
- Quality class: P
Lisainfo: A4 (kvaliteediklass PJ)
- Name: Radiator
- Quality class: P
Lisainfo: A5 (kvaliteediklass P)
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Name: USZCZELKA KORKA ZBIORNIKA WYRàWNAWCZEGO VW
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Main Expansion Tank
- Quantity per packing unit: 25
- Inner Diameter [mm]: 28.3
- Outer Diameter [mm]: 32.1
- Thickness [mm]: 3.9
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year from: 06.2008
- Construction Year to: 05.2010
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 189
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Technical Information: left
- Quality class: PJ
- Name: Radiator
Lisainfo: A4 (kvaliteediklass PJ) Additional information: A4 (kvaliteediklass PJ)
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 470
- Core Width [mm]: 720
- Core Depth [mm]: 36
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
- Lisainfo: AC266808
- Additional information: AC266808
- Radiator type: Brazed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Manufacturer: KAMOKA
- Core Length [mm]: 720
- Core Width [mm]: 475
- Core Depth [mm]: 36
- Transmission Type: for manual transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 120.5
- Packaging width [cm]: 65.5
- Packaging height [cm]: 18
- Weight [kg]: 4.7
- Manufacturer: AKSDASIS
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 720*474*36
- Additional information: 720*474*36
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 468
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Supplementary Article/Supplementary Info: with oil cooler
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Engine Code: CCWB
-
Transmission Type: 6-
Speed Automatic Transmission - Core Depth [mm]: 34
- Core Length [mm]: 720
- Core Width [mm]: 468
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1618
- Manufacturer: MAGNETI MARELLI
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with top,
without expansion tank -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with top,
without expansion tank -
Supplementary Article/Supplementary Info: with oil cooler,
without gasket/ seal - Water Tank Material (radiator): Plastic
-
Name: Radiaator,
mootorijahutus - Manufacturer: NIS
-
Lisainfo: PORSCHE MACAN
(95B) (14- ) 3.0 i TURBO -
Additional information: PORSCHE MACAN
(95B) (14- ) 3.0 i TURBO
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 468
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Transmission Type: for automatic transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 120.5
- Packaging width [cm]: 65.5
- Packaging height [cm]: 18
- Weight [kg]: 5.32
- Manufacturer: AKSDASIS
- Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 38
- for OE number: 8K0121251Q
-
Weight [g]: 5,
170 -
Gross Weight [g]: 6,
850 -
alternative item: -
- Manufacturer: DENSO
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 4,
840 - Packaging height [cm]: 62.5
- Packaging length [cm]: 99
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Automatic Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 5,
104 - Packaging height [cm]: 63
- Packaging length [cm]: 99.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A4
(kvaliteediklass: Q)"
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A5
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks