• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Engine Code: CFKA
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: CFKA
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Number of pins: 3
• Socket colour: black
• Fabrication Number: ESS-AU-004
• Manufacturer: NTY

• Seerianumber: ECM-VW-003
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• for OE number: 038 906 051 D
• Fabrication Number: ECM-AU-004
• Manufacturer: NTY
• Name: NTY ECM-AU-004

Lisainfo: ENG.1.8T,1.8TSI,2.0TSI,2.0TFSI AUDI A3 04-13,A4 B7/B8,Q3 11-18, VW GOLF V/VI,JETTA III/IV,PASSAT B7,TIGUAN 07-18, SKODA OCTAVIA II 07-13,SUPERB II 05-15, SEAT ALTEA 07-,ALHAMBRA 10-12 Additional information: ENG.1.8T,1.8TSI,2.0TSI,2.0TFSI AUDI A3 04-13,A4 B7/B8,Q3 11-18, VW GOLF V/VI,JETTA III/IV,PASSAT B7,TIGUAN 07-18, SKODA OCTAVIA II 07-13,SUPERB II 05-15, SEAT ALTEA 07-,ALHAMBRA 10-12

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV488
• Manufacturer: ESEN SKV

• Vehicle Equipment: for vehicles with start-stop function
• for PR number: 7L8
• Number of pins: 4
• Manufacturer: JPN

• Pistikkontaktide arv: 4
• OE-numbri jaoks: 036 906 051 C
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Tootja piirang: VAG
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 500
• Kaabli ristlõige [mm²]: 0,75
• Asetuslaius (mm): 1,5
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: +125
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• juhtmeisolatsiooni materjal: Silikoon
• Pistiku kesta tüüp: Pistikuhülsi korpus
• SVHC: SVHS aineid ei esine
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Engine Code: CFKA
• Required quantity: 2
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Quality: OE EQUIVALENT
• for OE number: 07L905163A
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Manufacturer: HBE

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: CFKA
• Required quantity: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: CFKA
• Required quantity: 2
• Manufacturer: FACET

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Quantity: 2
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• for OE number: 036906051C
• Colour: black
• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550491
• Manufacturer: ERA

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Engine Code: CFKA
• Pressure from [kPA]: 27
• Pressure to [kPA]: 303
• Output Voltage, from [V]: 0.505
• Output Voltage, up to [V]: 4.71
• Name: EP 1.993.228
• Manufacturer: EPS

• Fabrication Number: EFP-AU-006
• Manufacturer: NTY
• Name: NTY EFP-AU-006

• Quantity: 1
• Cable Length [mm]: 385
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE AS10181

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: CFKA
• Construction Year from: 11.2011
• Vehicle Equipment: for vehicles with start-stop function
• Fitting Position: Brake Booster
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before catalytic converter
• Tootja piirang: VAG, Renault
• Pistikkontaktide arv: 6
• Asetuslaius (mm): 1,5
• Kaabli ristlõige [mm²]: 0,75
• Kaablipikkus (mm): 200
• Kokkupuutepind: tinutatud
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihendiga
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Number of pins: 3
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Supplementary Article/Supplementary Info: with shrink/solder connector
• for OE number: 4D0971993
• Manufacturer: MEAT&DORIA

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: CFKA
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Used part return not required:
• Fabrication Number: EPP-AU-015
• Manufacturer: NTY

Manufacturer: NRF KLIMATYZACJA

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Name: Lambda andur
• Manufacturer: MAX

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: VDO

• Engine Code: CFKA
• Required quantity: 1
• Housing Colour: green
• Length [mm]: 500
• Manufacturer: FACET

• Engine Code: CFKA
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV588

• Fitting Position: engine sided
• Number of connectors: 3
• Colour: green
• Cable Length [mm]: 465
• Weight [kg]: 0.062
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Colour: black
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 720
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.27
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV158

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Fitting Position: from fuel distributor to feed pipe
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Manufacturer: MAGNETI MARELLI

• Fuel Mixture Formation: Direct Injection
• Fitting Position: Fuel Rail
• Number of pins: 3
• Version: OE
• Manufacturer: METZGER

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 620
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 1K0998262S
• Manufacturer: MEAT&DORIA

• Engine Code: CFKA
• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 1,050
• for OE number: 022906262BJ
• Manufacturer: MEAT&DORIA

• Engine Code: CFKA
• Fitting Position: after catalytic converter
• Required quantity: 1
• Colour: black
• Cable Length [mm]: 800
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.243
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 750
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• for article number: 77031
• Manufacturer: FAE

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV423

• for OE number: 06H906262A, 022906262AB
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 111
• Gross Weight [g]: 144
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: BRM

• Engine Code: CFKA
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.17
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Sensor, Heated
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Length [mm]: 800
• Cable Length [mm]: 800
• Manufacturer: MAGNETI MARELLI

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 331
• Name: DE ES21069-12B1
• Manufacturer: DELPHI

• for OE number: 06J906461D
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 615
• Name: DE ES21368-12B1
• Manufacturer: DELPHI