Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Cable Length [mm]: 150
- Number of pins: 2
- Guarantee: 3 years guarantee
- Cable Cross Section [mm²]: 0.75
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.02
- Name: CE 53SKV256
- Manufacturer: ESEN SKV
- for OE number: 4H0951253C
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 100
- Resistor [Ohm]: 16
- Manufacturer: BOSCH
- Name: BS 0332201107
- Voltage [V]: 12
- Rated current [A]: 40
- Number of pins: 4
- Combi Switch Function: Normally Open Contact
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 1KO951253A
- Combi Switch Function: without light dimmer function
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Supplementary Article/Supplementary Info: with holder
- Manufacturer: BOSCH
- Number of pins: 4
- Voltage [V]: 12
- Current Strength [A]: 70
- Relay function: Normally open contact
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 004 545 2905
- Current Strength [A]: 20
- Number of connectors: 5
- Relay function: Normally open contact
- Voltage [V]: 12
- Manufacturer: TRUCKTEC
- Operating voltage [V]: 12
- Rated current [A]: 40
- Combi Switch Function: Normally Open Contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Resistor [Ohm]: 560
- Length [mm]: 27.8
- Width [mm]: 27.8
- Height [mm]: 25.4
-
Connector type: 1x 6,
3 mm, 3x 4, 8 mm - Number of pins: 4
- Manufacturer: MEYLE
Relay function: Heated windscreen, Heated rear window, Normally open contact, Pump, automatic transmission, Klaxon, Front Fog Light, Air Conditioning, Fuel Pump, Secondary Air System, Washer Fluid Pump, headlight cleaning, Engine control unit, Clamp 87, Clamp 15, Terminal 30, Terminal 50, Terminal 75, Towbar Socket, Head space heating, Safety Belt Tensioner, Auxiliary Hydraulic Pump, transmission oil (hybrid), Brake Booster, Central electrics, Strobe-type Beacon, Alarm System, Starter, Parking Heater
- Vehicle Equipment: for vehicles with electr. auxiliary heater
- Operating voltage [V]: 12
- Rated current [A]: 70
- Combi Switch Function: Normally Open Contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Resistor [Ohm]: 560
- Length [mm]: 27.8
- Width [mm]: 27.8
- Height [mm]: 25
-
Connector type: 2 x 9,
5 mm, 2 x 6, 3 mm - Colour: green
- Number of pins: 4
- Manufacturer: MEYLE
Relay function: Heated windscreen, Battery main switch, Heated rear window, Electric booster heater, Interior Blower, Headlight system, Water pump after-run, Auxiliary Water Pump, Terminal 30, Normally open contact, Seat Heating, Clamp 15, X contact relief
-
for OE number: 8D0 951 253,
7M0 951 253 A - Block Separation:
- Combi Switch Function: without light dimmer function
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Supplementary Article/Supplementary Info: without holder
- Resistor [Ohm]: 90
- Manufacturer: BOSCH
- for OE number: 2D0 959 145 A
- Current Strength [A]: 15
- Voltage [V]: 12
- Relay function: Normally open contact
- Manufacturer: BOSCH
- Relay function: Normally open contact
- for OE number: 4H0 951 253 A
- Width [mm]: 45
- Height [mm]: 35
- Length [mm]: 75
- Guarantee: 3 years guarantee
- Number of pins: 4
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Voltage [V]: 12
- Current Strength [A]: 40
-
Relay function: Clamp 87,
Terminal 30 - Number of connectors: 4
- Fitting Position: Engine Compartment
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Corresponds to the original part in colour: green,
black -
Relay Number: 644,
100 -
for OE number: 4H0951253,
13171831 - Voltage [V]: 12
- Capacity at 12V: 70A
- Combi Switch Function: Normally Open Contact
- Colour: black
- Number of pins: 4
- Wiring Diagramme: S2
- Supplementary Article/Info 2: with resistor
- Protection Type (IP Code): IP54
- Inductive Load [A]: 35
- Capacitive Load [A]: 30
- Ohmic Load [A]: 40
- Plug Type ID: B
- Supplementary Article/Supplementary Info: without holder
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 4RA933332531
Relay function: Pre-glow device, Heated windscreen, Heated rear window, Fan, heater/air conditioning, Comfort Equipment Variant (trim package), engine cooling, Clamp 15, ESP, Clamp 15R, Secondary Air System, Air Suspension, Engine control unit, Hydraulic Unit, Clamp 87, Starter, ABS, ABS recovery pump Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 8E0 951 253
-
Combi Switch Function: On/
Off Switch - Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
- Housing Type: Housing with Plastic Lid
- Protection Type (IP Code): IP20
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Housing Colour: black
- Resistor [Ohm]: 63
- Length [mm]: 28
- Width [mm]: 28
- Height [mm]: 40
- Manufacturer: BOSCH
- for OE number: 019 193 750 3
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Manufacturer: BOSCH
- Supplementary Article/Supplementary Info: Basic Version of Bodywork
- Voltage [V]: 12
- Colour: black
- Number of pins: 6
- Fitting Position: Engine Compartment
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks