Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
-
Engine Code: CAHB,
CGLD - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
- Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10 -
Additional information: Oil seal,
35x48x10
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- General Information: Oil seal for crankshaft; front
- Manufacturer: VIKA
- Fitting Position: Front
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Fabrication Number: NUP-
VW- 012 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CGLD
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Manufacturer: BGA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- General Information: Oil seal for camshaft; 47*10*32
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Dust Cover: with dust lip
- Manufacturer: TOPRAN
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Manufacturer: BGA
- Lisainfo: OS8325 BGA
- Additional information: OS8325 BGA
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Engine Code: CAHB
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085C
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Name: FAI OS1663
- Additional information: OS1663 FAI
- Lisainfo: OS1663 FAI
-
Engine Code: CAHB,
CGLD - Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085
-
Swirl Type: Right-
hand Twist -
Version: PTFE POP/
ACM -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Lisainfo: 20036702B CORTECO
- Additional information: 20036702B CORTECO
- Fitting Position: frontal sided
- General Information: Oil seal for camshaft
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Engine Code: CAHB
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Fitting Position: frontal sided
- General Information: Oil seal for crankshaft; front
- Manufacturer: BORSEHUNG
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Width [mm]: 10
- Outer Diameter [mm]: 47
- for OE number: 03L103085C
- Name: DRM 01294
- Manufacturer: DR.MOTOR AUTOMOTIVE
Brief Information: Always compare old and new part (in particular OE No.)
- Fitting Position: frontal sided
- Engine Code: CAHB
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Additional information: 81-
34367- 00 REIN -
Lisainfo: 81-
34367- 00 REIN
-
Engine Code: CAHB,
CGLD, CNHC - Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
-
Engine Code: CGLD,
CNHC - Fitting Position: frontal sided
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Swirl Type: Right-
hand Twist -
Name: Volli rongastihend,
Vntvoll - Manufacturer: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Engine Code: CAHB
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Engine Code: CAHB
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 034115147A
- Manufacturer: FAI
- Engine Code: CAHB
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: CGLD,
CAHB - Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CGLD
- Fitting Position: Front
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Additional information: 897.690 ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
-
Engine Code: CGLD,
CNHC - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
-
Engine Code: CAHB,
CGLD - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 155.560 ELR
- Additional information: 155.560 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
-
Engine Code: CAHB,
CGLD - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Fitting Position: frontal sided,
Cylinder Head - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CAHB
- Fitting Position: frontal sided
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: frontal sided
-
Engine Code: CAHB,
CGLD - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.02
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CAHB
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: Crankcase
-
Fabrication Number: NUP-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: CGLD,
CAHB - for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Engine Code: CAHB
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103171A
- Manufacturer: FAI
- Name: FAI OS1662
- Engine Code: CAHB
- Fitting Position: transmission sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Inner Diameter [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MAX
- Fitting Position: frontal sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Observe service information:
-
Fabrication Number: NUP-
VW- 026 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: CGLD,
CNHC - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Engine Code: CNHC
- Fitting Position: frontal sided
- Outer Diameter 1 [mm]: 136.3
- for OE number: 04L103151
- Height 1 [mm]: 14.7
- Height 2 [mm]: 46.7
- Supplementary Article/Info 2: with flange
- Outer Diameter 2 [mm]: 217.5
- Inner Diameter 1 [mm]: 35
-
Name: SIMER. WAU VW GOLF 2.0TDI 07-
- Manufacturer: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- Housing Type: with housing
- Housing material: Plastic
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
- Weight [kg]: 0.23
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Required quantity: 1
- Supplementary Article/Info 2: with flange
- Thickness [mm]: 17.3
- General Information: Oil sealing flange for crankshaft; rear
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Engine Code: CNHC
-
Material: PTFE
(polytetrafluoroethylene) -
Name: SIMER. WAU VW GOLF 2.0TDI 07-
- Manufacturer: MAX
- for OE number: 03L 103 171 A
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 131
- Manufacturer: TRUCKTEC
- Fitting Position: frontal sided
- General Information: Oil sealing flange for crankshaft; front
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Housing Type: with housing
- Housing material: Plastic
- Supplementary Article/Supplementary Info: with pulse generator wheel
- Supplementary Article/Info 2: without RPM sensor
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CNHC
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: SP
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Fitting Position: transmission sided
-
Supplementary Article/Info 2: with mounting sleeve,
without RPM sensor - Housing Type: with housing
- Housing material: Plastic
- Supplementary Article/Supplementary Info: with pulse generator wheel
-
Sealing lip material: PTFE
(polytetrafluoroethylene) -
Name: SIMER. TY WAU VW PASSAT 2.0TDI 14-
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: CGLD,
CAHB - Thickness [mm]: 17.3
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Fitting Position: transmission sided
- Weight [kg]: 0.23
- Supplementary Article/Info 2: with flange
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CNHC
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Material: PTFE
(polytetrafluoroethylene) - Fitting Position: frontal sided
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with flange
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: FEB
- Additional information: FE46749
- Lisainfo: FE46749
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
-
Engine Code: CAHB,
CGLD - Inner Diameter [mm]: 85
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Name: DRM 01228
- Manufacturer: DR.MOTOR AUTOMOTIVE
-
Engine Code: CAHB,
CGLD, CNHC - Fitting Position: transmission sided
- Outer Diameter 1 [mm]: 131
- Height 1 [mm]: 15.7
- Swirl Type: Alternating Twist
- Supplementary Article/Info 2: with mounting sleeve
- Outer Diameter 2 [mm]: 152
- Inner Diameter 1 [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: transmission sided
-
Engine Code: CAHB,
CGLD - Observe mounting information:
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Article number of the recommended special tool: VW T10134
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: transmission sided
- Engine Code: CAHB
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 131
-
Swirl Type: Left-
hand Twist - Supplementary Article/Info 2: with mounting sleeve
- Housing Type: with housing
-
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MEY
- Fitting Position: frontal sided
- Engine Code: CNHC
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Manufacturer: REINZ
- Fitting Position: frontal sided
- Engine Code: CNHC
- Housing Type: with housing
- Inner Diameter [mm]: 135
- Outer Diameter [mm]: 215
- Height [mm]: 54
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Engine Code: CNHC
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 131
-
Swirl Type: Left-
hand Twist - Supplementary Article/Info 2: with mounting sleeve
- Housing Type: with housing
-
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MEY
- Fitting Position: transmission sided
-
Engine Code: CAHB,
CGLD, CNHC - Inner Diameter [mm]: 130
- Outer Diameter [mm]: 165
- Height [mm]: 16.5
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Engine Code: CNHC
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136.3
- Fitting Position: frontal sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Engine Code: CNHC
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Manufacturer: REINZ
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks