• Fitting Position: Right, Left, Rear Axle, Front Axle
• Number of Holes: 4
• Supplementary Article/Info 2: with rubber mount
• Manufacturer: SNR
• Name: SN R157.43
• Additional information: R157.43 SNR
• Lisainfo: R157.43 SNR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: without wheel hub, with integrated ABS sensor
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 96
• for OE number: 8K0501611
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 142
• Rim Hole Number: 5
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Front Axle
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Supplementary Article/Info 2: with integrated ABS sensor, without flange
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX
• Lisainfo: 2744/MG
• Additional information: 2744/MG

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 62
• Rim Hole Number: 4
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 1 [mm]: 61
• Inner Diameter 2 [mm]: 62
• Manufacturer: GSP

• Supplementary Article/Info 2: with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-AU-009
• Manufacturer: NTY
• Name: NTY KLP-AU-009

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-006
• Rim Size [inch]: 17.0, 18.0
• Manufacturer: NTY
• Name: NTY KLT-AU-006

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-007
• Article number of recommended accessories: KLT-AU-007-Z
• Manufacturer: NTY

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 142
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.02
• Number of Holes: 4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Fitting Position: Front Axle, Rear Axle
• Vehicle Identification Number (VIN) to: 8K-9A212000
• Engine Code: CAHB
• Transmission Type: Manual Transmission
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 142
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated ABS sensor, without flange
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Front Axle
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Supplementary Article/Info 2: with integrated ABS sensor, without flange
• Name: CFD 110208
• Manufacturer: DACO

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 62
• Rim Hole Number: 4
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 1 [mm]: 61
• Inner Diameter 2 [mm]: 62
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right
• Number of Holes: 4
• Manufacturer: JP GROUP

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring Lisainfo: Wheel Bearing Kit , with integrated magnetic sensor ring Additional information: Wheel Bearing Kit , with integrated magnetic sensor ring

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 142
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.41
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV209

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: without wheel hub, with integrated ABS sensor
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 96
• for OE number: 8K0501611
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 142
• Rim Hole Number: 5
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Tandem-axle Assembly
• Vehicle Identification Number (VIN) to: 8K-9A 212 000
• Engine Code: CAHB
• Transmission Type: Manual Transmission
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter 1 [mm]: 100
• Outer Diameter 2 [mm]: 151.5
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Net weight [kg]: 1.98
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Rim Hole Number: 5
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing

• Engine Code: CAHB, CNHC, CGLD
• Fitting Position: Front Axle, Rear Axle
• not for country specific design: Russia
• Block Separation:
• Vehicle Identification Number (VIN) from: ******8K*8*002923
• Vehicle Identification Number (VIN) to: ******8K*9A212000
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 102
• Bearing Type: Angular Ball Bearing
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Weight [kg]: 1.52
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• not for country specific design: Russia
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 102
• Bearing Type: Angular Ball Bearing
• Weight [kg]: 1.92
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: with integrated magnetic sensor ring, with bolts/screws General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 61
• Inner Diameter 2 [mm]: 62
• Outer Diameter 1 [mm]: 102
• Width 1 [mm]: 40.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Thread Size: M12 x 1.5
• Outer Diameter 2 [mm]: 100
• Number of flange connections: 4
• Weight [kg]: 2.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Production date to: 05.01.2009
• not for PR number: SA6
• Block Separation:
• Production date from: 05.01.2009
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Outer Diameter [mm]: 142
• Supplementary Article/Supplementary Info: with gasket/seal
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with grease cap, with screw, Wheel Bearing integrated into wheel hub General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR LR+FR
• for OE number: 8K0407607
• Inner Diameter [mm]: 61
• Width 1 [mm]: 41
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: WAUZZZ8KZ8-000001 >>
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 102
• Inner Diameter 2 [mm]: 62
• Manufacturer: OPTIMAL

Supplementary Article/Info 2: with integrated magnetic sensor ring, without wheel hub

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter 1 [mm]: 102
• Inner Diameter [mm]: 61
• Inner Diameter 2 [mm]: 62
• Width [mm]: 40.5
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6109 00 FAG
• Additional information: 713 6109 00 FAG

• Fitting Position: Front Axle
• not for country specific design: Russia
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 102
• Bearing Type: Angular Ball Bearing
• Weight [kg]: 1.92
• Name: SW 30 93 0271
• Manufacturer: SWAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, with bolts/screws General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 1.979
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.6
• Packaging height [cm]: 9.6
• Outer Diameter [mm]: 102
• Inner Diameter [mm]: 61
• Inner Diameter 2 [mm]: 62
• Width [mm]: 40.5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• for OE number: 4H0 498 625
• Fitting Position: Front Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 62, 61
• Outer Diameter [mm]: 102
• Width [mm]: 40.5
• Number of Holes: 4
• Number of Teeth, ABS ring: 96
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY
• Lisainfo: 1006500010
• Additional information: 1006500010

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: KLP-AU-009K
• Manufacturer: NTY
• Name: NTY KLP-AU-009K

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Supplementary Article/Info 2: without flange, with integrated ABS sensor
• Technical Information: With HUB 2 bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 6649 SKF
• Additional information: VKBA 6649 SKF

• Fitting Position: Front
• General Information: Wheel bearing; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• General Information: Wheel bearing; front
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Inner Diameter [mm]: 61
• Width [mm]: 40.5
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Required quantity: 2
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Width [mm]: 80
• Thickness [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 142
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.42
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 96
• Outer Diameter [mm]: 142
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 42
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Rear Axle
• Width [mm]: 69.4
• Inner Diameter [mm]: 32
• Wheel Hub Diameter [mm]: 142
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: OPTIMAL

• Fitting Position: Rear
• General Information: Wheel bearing assembly; rear
• Manufacturer: BORSEHUNG

• Width [mm]: 80
• Thickness [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 142
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.42
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 93 6650
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 142
• Inner Diameter [mm]: 32
• Width [mm]: 69.4
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: WAUZZZ8KZ8-000001 >>
• Rim Hole Number: 5
• Width [mm]: 40.5
• Thread Size: M14x1.5
• Outer Diameter [mm]: 141.8
• Mounting Type: Pre-assembled
• Bolt Hole Circle Ø [mm]: 112
• Number of Teeth on input shaft: 42
• Manufacturer: OPTIMAL

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Rear Axle
• Required quantity: 2
• Flange Diameter [mm]: 142
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear
• Supplementary Article/Info 2: with bolts
• General Information: Wheel bearing assembly; rear; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 141.9
• Width 1 [mm]: 70.2
• Rim Hole Number: 5
• Weight [kg]: 2.68
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Thread Size: M14 x 1.5
• Bolt Hole Circle Ø [mm]: 112
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Width [mm]: 40.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 102
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 3.622
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R157.44

• Fitting Position: Front Axle
• General Information: Wheel hub; front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 2.477
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.4
• Packaging height [cm]: 10.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 142
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Outer Diameter [mm]: 102
• Required quantity: 1
• Width [mm]: 40.5
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with RPM sensor
• Inner Diameter [mm]: 61
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.