• Fitting Position: engine sided
• Observe system fill quantity:
• Material: Sheet Steel
• Gasket Design: Metal Elastomer Gasket
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAHB
• Quantity per packing unit: 5
• Name: Tihend,olifiltrikorpus
• Manufacturer: ELR
• Lisainfo: 530.821 ELR
• Additional information: 530.821 ELR

• Supplementary Article/Supplementary Info: Incl. Gasket Set
• General Information: Seal for oil filter bracket
• Manufacturer: VIKA

• General Information: Seal for oil filter bracket
• Manufacturer: VIKA

• Outer Diameter [mm]: 27
• Inner Diameter [mm]: 20
• Shape: O Shape
• Fitting Position: engine sided
• Material: ACM (Polyacrylate)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Shape: D Shape, Symmetric
• Fitting Position: engine sided
• Observe system fill quantity:
• Colour: black
• Manufacturer: TOPRAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: engine sided
• Multi-piece: two-piece
• Observe system fill quantity:
• Material: ACM (Polyacrylate)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CNHC
• Fitting Position: engine sided
• Shape: D Shape
• Name: Tihend,olifiltrikorpus
• Manufacturer: DRM

• Engine Code: CNHC
• Fitting Position: engine sided
• Shape: O Shape
• Name: Tihend,olifiltrikorpus
• Manufacturer: DRM

• Engine Code: CAHB
• Manufacturer Restriction: Mann+Hummel
• Manufacturer: JP GROUP
• Lisainfo: Cover, oil filter housing
• Additional information: Cover, oil filter housing

• Engine Code: CAHB
• Thickness [mm]: 0.35
• Length [mm]: 129
• Width [mm]: 100
• Name: TIHEND,OLIFILTER
• Manufacturer: AJU

• for OE number: 45115433
• Manufacturer: KAMOKA

• Material: GRP (Glass fibre Reinforced Plastic)
• Thread Size: M 80
• Thread Pitch [mm]: 3
• Bolt Head-/Nut Design: Male Hex
• Manufacturer Restriction: MAHLE
• for OE number: 045 115 389H
• Observe system fill quantity:
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 045 115 433 B
• Manufacturer: KAMOKA

• Spanner Size: 32
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-059
• Manufacturer: NTY
• Name: NTY CCL-AU-059

• Weight [kg]: 0.125
• Required quantity: 1
• General Information: Oil filter cap
• Manufacturer: VIKA

• General Information: Repair kit for oil filter
• Manufacturer: VIKA

• Height [mm]: 62
• Spanner Size: 32
• Outer Diameter [mm]: 91
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-030
• Manufacturer: NTY
• Name: NTY CCL-AU-030

• Engine Code: CAHB
• Manufacturer Restriction: Filtrauto
• Height [mm]: 58.6
• Outer Diameter [mm]: 89.4
• Spanner Size: 32
• Name: KATE,OLIFILTRIKONSOOL
• Manufacturer: MAX

• Weight [kg]: 0.095
• Required quantity: 1
• General Information: Oil filter cap
• Manufacturer: VIKA

• Material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Bolt Head-/Nut Design: Male Hex
• Manufacturer Restriction: PURFLUX, FILTRAUTO
• Observe the vehicle manufacturer specifications:
• Observe system fill quantity:
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CGLD
• Spanner Size: 32
• Supplementary Article/Supplementary Info: with gasket/seal
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV266

• Engine Code: CGLD
• Length [mm]: 200
• Outer Diameter [mm]: 88
• Spanner Size: 32
• Tightening Torque [Nm]: 25
• Manufacturer: JP GROUP
• Lisainfo: Cover, oil filter housing
• Additional information: Cover, oil filter housing

• Outer Diameter [mm]: 88
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-VW-014
• Manufacturer: NTY
• Name: NTY CCL-VW-014

• Bolt Head-/Nut Design: Male Hex
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with gaskets/seals
• General Information: Oil filter cap
• Manufacturer: VIKA

• Engine Code: CAHB
• Manufacturer Restriction: Mann+Hummel
• Height [mm]: 62
• Outer Diameter [mm]: 91
• Spanner Size: 32
• Name: KATE,OLIFILTRIKONSOOL
• Manufacturer: MAX

• General Information: Oil filter cap
• Manufacturer: VIKA

• Height [mm]: 59
• Outer Diameter [mm]: 91.6
• Spanner Size: 32
• Manufacturer: 3RG

• Engine Code: CAHB
• Manufacturer Restriction: Filtrauto
• Height [mm]: 58.6
• Outer Diameter [mm]: 89.4
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer's restriction oil filter housing: Purflux
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.095
• Supplementary Article/Info 2: with seal ring
• Name: KATE,OLIFILTRIKONSOOL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Thread Size: M 83
• Thread Pitch [mm]: 3
• Bolt Head-/Nut Design: Male Hex
• Manufacturer Restriction: MANN + HUMMEL
• Observe system fill quantity:
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CGLD
• Outer Diameter [mm]: 88
• Spanner Size: 32
• Name: Kate,olifiltrikonsool
• Manufacturer: MAX

• Engine Code: CAHB
• Manufacturer Restriction: Filtrauto
• Height [mm]: 59
• Outer Diameter [mm]: 89
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer's restriction oil filter housing: Purflux
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.095
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CGLD
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01863

• Manufacturer Restriction: Filtrauto
• Supplementary Article/Info 2: with seal ring
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: ASHIKA

• General Information: Oil filter cap
• Manufacturer: VIKA

• Manufacturer Restriction: Mann+Hummel
• Supplementary Article/Info 2: with seal ring
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: ASHIKA

• Engine Code: CGLD
• Manufacturer: VAICO
• Quality class: PJ
• Name: Oil filter housing

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening Torque [Nm]: 25
• Length [mm]: 200
• Outer Diameter [mm]: 88
• Manufacturer: 3RG

Manufacturer: FAST

• Engine Code: CGLD
• Number of Parts [parts]: 2
• Manufacturer: ELRING

• Material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Outer Diameter [mm]: 87
• Thread Size: M 80
• Thread Pitch [mm]: 3
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 32
• Tightening Torque [Nm]: 25
• Housing Colour: black
• Observe the vehicle manufacturer specifications:
• Observe system fill quantity:
• Supplementary Article/Supplementary Info: with gasket/seal
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAHB
• Manufacturer Restriction: Mahle
• Height [mm]: 59
• Outer Diameter [mm]: 91.6
• Spanner Size: 32
• Name: Kate,olifiltrikonsool
• Manufacturer: MAX

Manufacturer: METALCAUCHO

• Vehicle configuration line / variant: Sogefi
• Filter type: Filter Insert
• Height [mm]: 58.5
• Outer Diameter [mm]: 89
• Thread Size 1: ART 84x3
• Manufacturer: PURFLUX

• Total Length [mm]: 200
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: CGLD
• Length [mm]: 200
• Outer Diameter [mm]: 88
• Spanner Size: 32
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.117
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: Oil filter element with cap
• Manufacturer: VIKA

• Engine Code: CGLD
• Length [mm]: 200
• Outer Diameter [mm]: 88
• Spanner Size: 32
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.117
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CNHC
• Height [mm]: 78
• Outer Diameter [mm]: 80
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.11
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT FILTRY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAHB
• Height [mm]: 62
• Outer Diameter [mm]: 91
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer's restriction oil filter housing: Mann + Hummel
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.125
• Supplementary Article/Info 2: with seal ring
• Name: KATE,OLIFILTRIKONSOOL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAHB
• Height [mm]: 62
• Outer Diameter [mm]: 91
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer's restriction oil filter housing: Mann + Hummel
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.125
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAHB
• Height [mm]: 59
• Outer Diameter [mm]: 91.6
• Spanner Size: 32
• Bolt Head-/Nut Design: Male Hex
• Manufacturer's restriction oil filter housing: Mahle
• Tightening Torque [Nm]: 25
• Weight [kg]: 0.095
• Supplementary Article/Info 2: with seal ring
• Name: KATE,OLIFILTRIKONSOOL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CGLD
• Supplementary Article/Info 2: with filter
• Name: Oliradiaator,mootorioli
• Manufacturer: MAX

• General Information: Transmission oil filter assembly
• Manufacturer: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with lid, with filter
• Fabrication Number: CCL-AU-010A
• Manufacturer: NTY
• Name: NTY CCL-AU-010A

• General Information: Oil filter assembly; with seal
• Manufacturer: VIKA

• Engine Code: CGLD
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with oil cooler
• Name: Korpus, olifilter
• Manufacturer: MAX

• Engine Code: CGLD
• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Lisainfo: Housing, oil filter
• Additional information: Housing, oil filter

• Engine Code: CGLD
• Supplementary Article/Supplementary Info: with gasket/seal, with oil filter
• Weight [kg]: 0.81
• Name: Korpus, olifilter
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CGLD
• Supplementary Article/Supplementary Info: with gasket/seal, with oil filter
• Weight [kg]: 0.81
• Name: Korpus, olifilter
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CGLD
• Supplementary Article/Supplementary Info: with oil cooler
• Name: DRM 211015S
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: CGLD
• Supplementary Article/Info 2: with filter
• Cooling Type: Water-cooled
• Material: Aluminium
• Supplementary Article/Supplementary Info: with oil cooler
• Name: OLIRADIAATOR,MOOTORIOLI
• Manufacturer: NRF

• Engine Code: CGLD
• Supplementary Article/Supplementary Info: with gasket/seal, with oil filter, with oil cooler
• Weight [kg]: 1.22
• Observe service information:
• Name: Korpus, olifilter
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Spanner Size: 32
• Supplementary Article/Supplementary Info: with oil cooler, with gaskets/seals
• Supplementary Article/Info 2: with filter, with lid
• Observe the vehicle manufacturer specifications:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CGLD
• Supplementary Article/Supplementary Info: with gasket/seal, with oil cooler, with oil filter
• Weight [kg]: 1.22
• Observe service information:
• Name: Korpus, olifilter
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CNHC
• Manufacturer Restriction: HENGST
• Supplementary Article/Info 2: with radiator, with cap, with filter
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Korpus, olifilter
• Manufacturer: MAX

• Article number of recommended accessories: V15-60-6012
• Supplementary Article/Info 2: without filter
• Supplementary Article/Supplementary Info: with oil filter housing
• Fitting Position: Engine Block
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CGLD
• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Housing Type: Synthetic Material Housing
• Installation Information: Use new screws and tighten crosswise!
• Manufacturer: METZGER

Supplementary Article/Supplementary Info: with gasket/seal, with oil cooler, without oil filter General Information: Note the installation instructions of the original manufacturer during assembly.