Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- for PR number: 1BA
- Length [mm]: 300
- Width [mm]: 30
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Rear Axle
- Weight [kg]: 0.16
- Manufacturer: FEBI BILSTEIN
- Additional information: FE106132
- Lisainfo: FE106132
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- General Information: Coil spring mat; front
- Manufacturer: VIKA
- for PR number: 1BA
- Fitting Position: Rear Axle
- Manufacturer: VAICO
Suspension: for vehicles with standard suspension, for vehicles with sports suspension General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: AD-
VW- 029 - Manufacturer: NTY
-
Name: NTY AD-
VW- 029
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 4
- Fitting Position: Front Axle
-
Fabrication Number: AB-
VW- 019K - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Name: CFD PK0206
- Manufacturer: DACO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Fitting Position: Front Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Name: CFD PK0203
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version
-
Fitting Position: Right,
Front Axle - Number of Parts [parts]: 1
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.22
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Suspension: for vehicles with sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right -
Article number of recommended accessories: 513835,
510383 - Manufacturer: GSP ZAWIESZENIE
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Installatsiooni pool: Esisild
- Manufacturer: ASHIKA
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Installatsiooni pool: Esisild
- Manufacturer: ASHIKA
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Name: CFD PK0204
- Manufacturer: DACO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Name: CFD PK4764
- Manufacturer: DACO
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with standard suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: AD-
VW- 037 - Supplementary Article/Info 2: without bearing
- Manufacturer: NTY
-
Name: NTY AD-
VW- 037
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Name: CFD PK0208
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Installatsiooni pool: Tagasild
- Manufacturer: ASHIKA
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Manufacturer: KAVO PARTS
- Installatsiooni pool: Tagasild
- Manufacturer: ASHIKA
Suspension: for vehicles without sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Kõrgus (mm): 53
- Välisläbimõõt 2 [mm]: 90
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
- Välisläbimõõt 1 [mm]: 113
-
Kaal (kg): 0,
366 - Siseläbimõõt [mm]: 12
- Manufacturer: TEDGUM
- Number of Parts [parts]: 1
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 - Fitting Position: Front Axle Right
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.20
- for OE number: 8K0512131J
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Weight [g]: 192
- Component Number: 2
- Name: IM 51008
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Suspension: for vehicles without electronic suspension control
- not for PR number: 1BL
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.34
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: DACO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Suspension: for vehicles with electronic suspension control
- for PR number: 1BL
-
Material: Rubber/
Metal - Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.34
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 8 K0 412 377 C,
8K0 412 377 A - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: SACHS AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: JP GROUP
- Lisainfo: Top Strut Mounting
- Additional information: Top Strut Mounting
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 8 K0 412 377 C,
8K0 412 377 A - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
- Name: LMI 3490701
SVHC: No information available, please contact the manufacturer!
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.41
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per axle: 1
- Material: Thermoplast
- Weight [g]: 168
- Component Number: 4
- Name: IM 50335
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Required quantity: 1
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Weight [kg]: 0.3
- Manufacturer: DENCKERMANN AMORTYZATORY
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.41
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 93 1984
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Parts [parts]: 1
-
Fitting Position: Rear Axle Right,
Rear Axle Left -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB957.14
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [g]: 460
- Name: IM 35171
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 8K0 513 353 D,
8K0 513 353 E - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: SACHS
- Name: SHS 802561
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 8K0 513 353 D,
8K0 513 353 E - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
- Name: LMI 3551401
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Name: COC 80001501
- Manufacturer: CORTECO
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- Fitting Position: Front Axle
-
Technical Information: Suspension mounting only
(no bearing) - Manufacturer: KAYABA PK SM ZESTAWY
- Name: KY SM5784
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without electronic suspension control
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Shock Absorber System: Level Control
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 260
- Component Number: 4
- Name: IM 51043
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
for OE number: 8K0 412 377 B,
8K0 412 377 D - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
for OE number: 8K0 412 377 B,
8K0 412 377 D - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
- Name: LMI 3490801
SVHC: No information available, please contact the manufacturer!
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Lisainfo: KYB910118
- Additional information: KYB910118
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without electronic suspension control
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
228812 - Quality class: Q
- Fitting Position: Front Axle
- for OE number: 8K0412131F
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D5-
127
- Fitting Position: Rear Axle
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN AMORTYZATORY
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEYLE
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear Axle - Height [mm]: 58
- Required quantity: 2
- Material: Aluminium
- Outer Diameter [mm]: 63
- Centering Diameter [mm]: 11
- for OE number: 1J0 513 353 D
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN AMORTYZATORY
Suspension: for vehicles without sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Quantity per axle: 1
- Manufacturer: SKF ZAWIESZENIE
Suspension: for vehicles with sports suspension, for vehicles with M technology
- for OE number: 8K0 412 377 D
- Fitting Position: Front Axle
- Manufacturer: TRUCKTEC
- Fitting Position: Rear Axle
- for OE number: 8K0513353E
- Manufacturer: SASIC
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Guarantee: 5 years guarantee
- Weight [kg]: 0.627
- Packaging length [cm]: 20
- Packaging width [cm]: 7.6
- Packaging height [cm]: 18.4
- Manufacturer: MONROE PODUSZKI AMORTYZATORA
- Fitting Position: Rear Axle
- Material: Thermoplast
- Suspension: for vehicles with standard suspension
- Weight [g]: 309
- Component Number: 4
- Name: IM 51177
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: FEBEST
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: FEBEST
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY 910156
- Lisainfo: KYB910156
- Additional information: KYB910156
Suspension: for vehicles with sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- for PR number: 1BA
- Fitting Position: Rear Axle
-
Name: BI 11-
299899 - Manufacturer: BILSTEIN
- Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.3
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY 910155
Suspension: for vehicles without sports suspension, for vehicles without bad road version, for vehicles without heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: SACHS
- Name: SHS 900225
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY SM5666
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles without electronic suspension control Technical Information: Suspension mounting only (no bearing) / / / Fastenings : suspension mounting washer (x2), suspension mounting bolt/screw (x2), suspension mounting circlip (x2)
- for PR number: 1BA
- Fitting Position: Rear Axle
- for components see parts list:
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.4
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Front Axle Left -
paired article number: GH-
364712H -
Manufacturer: AUTO-
GH - Name: GH 364712V
-
Additional information: GH-
364712V GH -
Lisainfo: GH-
364712V GH
- Fitting Position: Front Axle
- Weight [kg]: 0.23
- Required quantity: 1
- Name: TG TED57341
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
- Shock Absorber System: Normal Suspension
- Supplementary Article/Info 2: without bearing
- Guarantee: 5 years guarantee
- Weight [kg]: 0.6
- Packaging length [cm]: 15.1
- Packaging width [cm]: 8.4
- Packaging height [cm]: 14.6
- Manufacturer: MONROE
Suspension: for vehicles with sports suspension, for vehicles with heavy duty suspension
-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
364712V -
Manufacturer: AUTO-
GH - Name: GH 364712H
-
Additional information: GH-
364712H GH -
Lisainfo: GH-
364712H GH
- Fitting Position: Front Axle Left
-
Fabrication Number: AD-
VW- 044
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
-
Fabrication Number: AD-
VW- 045
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks