• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Lisainfo: Water pump
• Additional information: Water pump

• for OE number: 4F0973702
• Supplementary Article/Info 2: with plug
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4F0973702
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS
• Lisainfo: ABA120-00-243
• Additional information: ABA120-00-243

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of Teeth: 19
• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: MAX

• Water Pump Type: for timing belt drive
• Operating Mode: Mechanical
• Name: VEEPUMP
• Manufacturer: MAX

• Number of Teeth: 19
• Number of blades/vanes: 8
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)"

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• for OE number: 038121011H
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 19
• Manufacturer: DELLO AUTOMEGA

• General Information: water pump
• Manufacturer: VIKA

• General Information: water pump
• Manufacturer: VIKA

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Rakendustüüp: mehhaaniliselt
• Wasserpumpenausführung: jaoks sõrme-rihmülekandega
• Manufacturer: DRIVE

• Vehicle Equipment Line/Variant: TB
• for OE number: 038121011J
• Weight [kg]: 0.9
• Name: VEEPUMP
• Manufacturer: DAY
• Additional information: DP064
• Lisainfo: DP064

• Voltage [V]: 12
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-025
• Manufacturer: NTY

• New Part:
• Weight [kg]: 0.78
• Manufacturer: DOLZ
• Name: DO A251

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 03G 121 011X
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF

• Engine Code: CAHA
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1201

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Engine Code: CAHA
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1206

• Engine Code: CAHA
• Vehicle Identification Number (VIN) from: 8K-8-000001
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 32 92 4360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.909
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTITECH

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT SILNIK

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAHA
• for OE number: 03L 121 011 G
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Info 2: with seal ring
• Manufacturer: PIERBURG

• Engine Code: CAHA
• Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• for OE number: 8K0 965 561
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-022
• Manufacturer: NTY

Lisainfo: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08- Additional information: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08-

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Belt Pulley Ø [mm]: 56.2
• Weight [kg]: 0.8
• Manufacturer: VALEO
• Name: VA 506886

• Engine Code: CAHA
• Supplementary Article/Info 2: with seal ring
• Operating Mode: Mechanical
• Water pump impeller material: Metal
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• for OE number: 03L965561
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Observe service information:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: According to the vehicle manufacturer fitting the current version water pump requires, where necessary, adaption of the rear timing belt cover in the upper area using suitable workshop tools.

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 19
• Number of blades/vanes: 8
• Impeller Diameter [mm]: 64
• Water pump impeller material: Metal
• Manufacturer: HEPU

• for PR number: 7L8
• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 20
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN HANS PRIES

Vehicle Equipment: for vehicles without parking heater, for vehicles with auxiliary water pump General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAHA
• Vehicle Identification Number (VIN) from: 8K-8-000001
• Name: Lisaveepump
• Manufacturer: MAG

• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA535A

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358304761
• Manufacturer: HELLA

• for OE number: 8K0965561A
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Name: Lisaveepump
• Manufacturer: NRF

• Number of connectors: 3
• Weight [kg]: 0.215
• for OE number: 03L 965 561
• Observe service information:
• Name: Lisaveepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: NRF

• Operating Mode: Electric
• Quality: OE EQUIVALENT
• for OE number: 8K0819147A
• Manufacturer: MEAT & DORIA

• Engine Code: CAHA
• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump
• Manufacturer: PIE

Vehicle Equipment: for vehicles with start-stop function and recuperation

• Rakendustüüp: elektriline
• Pinge [V]: 12
• OE-numbri jaoks: 03L 965 561
• Manufacturer: HEPU POMPY WODY

• Engine Code: CAHA
• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump
• Manufacturer: PIE

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 3.05
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD062

• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Engine Code: CAHA
• for OE number: 3L 965 561
• Operating Mode: Electric
• Voltage [V]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Manufacturer: METELLI ROZRZAD

• Number of belts: 1
• Number of track rollers: 4
• Width 1 [mm]: 30
• Number of Teeth: 160
• Manufacturer: SNR
• Name: SN KDP457.670

• Water pump impeller material: Metal
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Weight [kg]: 2.56
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Rihmade arv: 1
• Kaal (kg): 2,96
• Name: AI WPK-199808
• Manufacturer: AIRTEX

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Engine Code: CAHA
• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HT -CAHA # CA
• Number of Teeth: 160
• Width [mm]: 30
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Driven Units: Camshaft
• Engine Code: CAHA, CAHB
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.519
• Width [mm]: 30
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 3.05

• Connector Shape: oval
• Inlet Ø [mm]: 222
• Outlet Ø [mm]: 222
• Material: Plastic
• Operating Mode: Electric
• Plug Type: Female
• Power [W]: 18
• Voltage [V]: 12

• Connector Shape: oval
• Inlet Ø [mm]: 222
• Outlet Ø [mm]: 222
• Material: Plastic
• Operating Mode: Electric
• Plug Type: Female
• Power [W]: 18
• Voltage [V]: 12