Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.005
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Rear Axle,
inner - Required quantity: 2
-
Name: Kinnitus,
stabilisaator - Manufacturer: TRI
- Fitting Position: Rear Axle
- Weight [kg]: 0.173
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 20
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.07
- Manufacturer: SWAG
- Name: SW 30 93 2073
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle both sides,
inner - Inner Diameter [mm]: 17
- Length [mm]: 40
- paired article number: 270639
- Weight [kg]: 0.08
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Inner Diameter [mm]: 21
-
Fabrication Number: ZGS-
VW- 009 -
Fitting Position: Front Axle Left,
Front Axle Right
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Diameter [mm]: 21
- Weight [kg]: 0.08
- Packaging length [cm]: 4.7
- Packaging width [cm]: 4.3
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
- Quantity: 2
-
Fitting Position: Rear Axle,
Rear Axle both sides - Weight [kg]: 0.005
- Required quantity: 2
- General Information: clamp
- Manufacturer: VIKA
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 17
- Stabiliser Bar Diameter [mm]: 20
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 19.6
- Inner Diameter [mm]: 18.1
- Length [mm]: 48
- Width [mm]: 40
- Height [mm]: 45
- for OE number: 1K0511327AQ
- Manufacturer: SASIC
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819020810
- Stabiliser Bar Diameter [mm]: 20
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.07
-
Name: Paigutus -
Kndmik VW T. GOLF5/ JETTA3/ - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Stabiliser Bar Diameter [mm]: 18.5
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 15.5
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819008310
- Stabiliser Bar Diameter [mm]: 23.6
-
Fitting Position: inner,
Front Axle - Required quantity: 2
- Manufacturer: TED
Name: Paigutus - Kndmik VW P. GOLF 03- /JETTA 05-/ TOURAN 03- 23,6MM
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23.6
- Inner Diameter [mm]: 22.1
- Length [mm]: 34
- Width [mm]: 44
- Height [mm]: 46
- for OE number: Part of 1K0411303BK
- Manufacturer: SASIC
- Fitting Position: Front Axle
- Weight [g]: 91
- Inner Diameter [mm]: 21
- Name: IM 34204
- Manufacturer: ORIGINAL IMPERIUM
- Additional information: IM 34204
- Lisainfo: IM 34204
- Stabiliser Bar Diameter [mm]: 24
- for PR number: 0AE
- Length [mm]: 45
- Width [mm]: 32
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.086
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 15
- Length [mm]: 43.4
- Weight [kg]: 0.064
- Mounting Type: Rubber Mount
- Manufacturer: RTS
- Stabiliser Bar Diameter [mm]: 24
- for PR number: 0AE
- Length [mm]: 45
- Width [mm]: 32
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.086
- Name: SW 33 10 3881
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Stabiliser Bar Diameter [mm]: 19.6
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. GOLF5/ JETTA3/ - Manufacturer: MEY
- Fitting Position: Rear Axle
- for PR number: 0BE
- Stabiliser Bar Diameter [mm]: 20.7
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18.5
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle,
inner - Required quantity: 2
- Stabiliser Bar Diameter [mm]: 19.6
-
Material: PU
(Polyurethane) - Manufacturer: TEDGUM_TD
- Fitting Position: Front Axle both sides
- Quantity: 4
- Inner Diameter [mm]: 24
-
Name: Laagripuks,
stabilisaator - Manufacturer: MAX
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Weight [kg]: 0.095
- Inner Diameter [mm]: 21
- Packaging length [cm]: 4.5
- Packaging width [cm]: 4.5
- Packaging height [cm]: 4.4
- Manufacturer: FEBEST
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.183
- Inner Diameter [mm]: 24
- Packaging length [cm]: 7
- Packaging width [cm]: 4.1
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
- Stabiliser Bar Diameter [mm]: 20
-
Inner Diameter [mm]: 15,
17 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.516
-
Name: REMONDIKOMPLEKT,
STABILISAATORILAAGER - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks