Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Weight [kg]: 0.173
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
-
Vehicle Identification Number (VIN) to: 8A-
N- 200000 -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 41.3
- Width [mm]: 38
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829048110
- for OE number: 0K20332110B
- Fitting Position: Rear
- Required quantity: 1
-
Material: Rubber/
Metal - Weight [g]: 106
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 36
- Length [mm]: 38
- Name: IM 1707
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Rubber mount for rear axle beam,
left/ right -
Additional information: Rubber mount for rear axle beam,
left/ right
-
Fitting Position: Right,
Left, Rear Axle - Weight [kg]: 0.68
- Name: COC 21652817
- Manufacturer: CORTECO
-
Vehicle Identification Number (VIN) to: 8C-
N- 300 000 -
Vehicle Identification Number (VIN) from: 8C-
N- 000 001 - Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Weight [kg]: 0.631
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Width 1 [mm]: 90
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 58
- Manufacturer: DELPHI
- Name: DE TD793W
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear, Lower -
Width [mm]: 36,
58 - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 58
- Manufacturer: OPTIMAL ZAWIESZENIE
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 57
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.586
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 57
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.586
- Name: SW 30 79 0016
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Vehicle Identification Number (VIN) from: 8C-
N- 000001 -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 56.8
- Width [mm]: 90
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower, outer -
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFORDER
- Name: LMI 1008401
-
Laagritüüp: Kummi-
metalllaager - Installatsiooni pool: Pealis
- Name: Suspension beam bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80 92-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80 92-
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - OE-numbri jaoks: 8A0505145D
- Name: Suspension beam bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 80 92-/ A4 94-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80 92-/ A4 94-
(kvaliteediklass: PJ)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks