• Voltage [V]: 12
• Resistor [Ohm]: 0.3
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Resistor for blower motor
• Additional information: Resistor for blower motor

• Vehicle Identification Number (VIN) to: 8C-P-300 000
• Vehicle Equipment: for vehicles with air conditioning
• Number of connectors: 4
• Weight [kg]: 0.066
• for OE number: 191 959 263
• Manufacturer: FEBI BILSTEIN
• Additional information: F19024
• Lisainfo: F19024

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Resistor [Ohm]: 0.26
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 4
• Packaging length [cm]: 7
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5.5
• Weight [kg]: 0.062
• for OE number: 191959263
• Manufacturer: AKSDASIS

• Vehicle Equipment: for vehicles with air conditioning
• Construction Year to: 07.1993
• Rated Voltage [V]: 12
• Number of pins: 4
• Plug Type: Round Plug
• Resistor [Ohm]: 0.26
• Name: TAKISTUS,SALONGIPUHUR
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8C-P-300 000
• Voltage [V]: 12
• Required quantity: 1
• Resistor [Ohm]: 0.26
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 4
• Weight [kg]: 0.07
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of connectors: 4
• Manufacturer: HC-CARGO

• Required quantity: 1
• Construction Year to: 12.1993
• Vehicle Identification Number (VIN) to: 8C-P-300 000
• Vehicle Equipment: for vehicles with air conditioning
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 7
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Name: Interior blower
• Quality class: PJ

Lisainfo: AUDI/VW/SEAT (kvaliteediklass PJ)

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with automatic climate control
• Fabrication Number: EWN-AU-004
• Manufacturer: NTY
• Name: NTY EWN-AU-004

• Voltage [V]: 12
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 3
• Warranty: 3 years warranty
• Weight [kg]: 0.18
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 95SKV033

• Voltage [V]: 12
• Warranty: 3 years warranty
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 95SKV078

• Voltage [V]: 12
• Resistor [Ohm]: 0.26
• Number of pins: 7
• Manufacturer: AIC
• Lisainfo: 57593 AIC
• Additional information: 57593 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Name: Interior blower
• Quality class: PJ

Lisainfo: AUDI 80, 86- (kvaliteediklass PJ)

• Number of pins: 3
• Voltage [V]: 12
• Name: JUHTIMISMOODUL, KLIIMASEADE
• Manufacturer: MAX

• Number of pins: 3
• Voltage [V]: 12
• Name: TAKISTUS,SALONGIPUHUR
• Manufacturer: NRF

• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 3
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Housing Type: Synthetic Material Housing
• Connector Shape: angular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Diameter [mm]: 146
• Manufacturer: JP GROUP
• Lisainfo: Blower motor for heater
• Additional information: Blower motor for heater

• Diameter [mm]: 146
• Rated Power [W]: 204
• Voltage [V]: 12
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Weight [kg]: 1.14
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 20
• Manufacturer: AKSDASIS

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Supplementary Article/Supplementary Info: without integrated regulator
• Power [W]: 240
• Voltage [V]: 12
• Number of pins: 2
• Diameter [mm]: 146

• RPM from [1/min]: 3,450
• Heating/Cooling: Single Fan
• Voltage [V]: 12
• Rated Power [W]: 240
• Diameter [mm]: 146
• Technical Information: Speed 1
• Name: MM MTE284AX
• Manufacturer: MAGNETI MARELLI

• Vehicle Equipment: for vehicles with air conditioning
• Voltage [V]: 13.5
• Power [W]: 243
• Manufacturer: TYC

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles without air conditioning
• Manufacturer Restriction: BOSCH
• Rotation Direction: Anticlockwise rotation
• Voltage [V]: 12
• Power [W]: 216
• Diameter 1 [mm]: 146
• Supplementary Article/Supplementary Info: without integrated regulator
• Connector Shape: rectangular
• Number of pins: 2
• Name: Salongipuhur
• Manufacturer: NRF

• for OE number: 1J0 907 521
• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 3
• Rated Voltage [V]: 12
• Weight [kg]: 0.147
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without air conditioning
• Voltage [V]: 13.5
• Power [W]: 270
• Manufacturer: TYC OŒWIETLENIE

• Voltage [V]: 12
• for OE number: 8A1820021
• Weight [kg]: 1.48
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• New Part:
• Packaging length [cm]: 21.5
• Packaging width [cm]: 21.5
• Packaging height [cm]: 20
• Manufacturer: AKSDASIS

• Quantity: 1
• General Information: fan control
• Manufacturer: BORSEHUNG

• Vehicle Equipment: for vehicles with air conditioning
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Supplementary Article/Info 2: without cable
• Plug Type: Blade Terminal
• Rated Voltage [V]: 12
• Number of pins: 2
• Housing material: Plastic
• Rotation Direction: Anticlockwise rotation
• Name: SALONGIPUHUR
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Supplementary Article/Supplementary Info: without integrated regulator
• Power [W]: 204
• Voltage [V]: 12
• Number of pins: 2
• Diameter [mm]: 146
• Manufacturer: NISSENS
• Name: NI 87068
• Lisainfo: VOLKSWAGEN PASSAT B3 (3A, 35I) (88-) 1.8 i
• Additional information: VOLKSWAGEN PASSAT B3 (3A, 35I) (88-) 1.8 i

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Diameter [mm]: 146
• Manufacturer: JP GROUP
• Lisainfo: Blower motor for heater
• Additional information: Blower motor for heater

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles without automatic climate control
• Rotation Direction: Anticlockwise rotation
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without integrated regulator
• Number of pins: 2
• Diameter [mm]: 147
• Name: Salongipuhur
• Manufacturer: MAX

• Construction Year to: 07.1995
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Main Current: for vehicles with 12V main current
• Fitting Position: Front
• Power [W]: 243
• Number of pins: 2
• Diameter [mm]: 146
• Supplementary Article/Supplementary Info: without integrated regulator
• Rotating beacon RPM [1/min]: 3,561
• Weight [kg]: 1.474
• Name: VA 884520
• Manufacturer: VALEO

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles without automatic climate control
• Rotation Direction: Anticlockwise rotation
• Voltage [V]: 12
• Diameter 1 [mm]: 147
• Supplementary Article/Supplementary Info: without integrated regulator
• Connector Shape: round
• Number of pins: 2
• Name: SALONGIPUHUR
• Manufacturer: NRF

• Diameter [mm]: 145
• Rated Power [W]: 292
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Voltage [V]: 12
• Current Strength [A]: 24.3
• Number of pins: 2
• Vehicle Equipment: for vehicles without air conditioning
• Net Weight [g]: 1,018
• Packaging height [cm]: 20.5
• Packaging length [cm]: 22
• Packaging width [cm]: 22
• Name: Salongipuhur
• Manufacturer: BEH MAH

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Supplementary Article/Supplementary Info: without integrated regulator
• Power [W]: 216
• Voltage [V]: 12
• Number of pins: 2
• Diameter [mm]: 146

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Supplementary Article/Supplementary Info: without integrated regulator
• Power [W]: 198
• Voltage [V]: 12
• Number of pins: 2
• Diameter [mm]: 146
• Manufacturer: NISSENS
• Lisainfo: AUDI 80 / 90 (B4) (91-) 1.6 i
• Additional information: AUDI 80 / 90 (B4) (91-) 1.6 i

• Construction Year to: 07.1995
• Manufacturer Restriction: VALEO
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Main Current: for vehicles with 12V main current
• Fitting Position: Front
• Power [W]: 198
• Number of pins: 2
• Diameter [mm]: 146
• Supplementary Article/Supplementary Info: without integrated regulator
• Rotating beacon RPM [1/min]: 3,650
• Weight [kg]: 1.82
• Name: VA 884651
• Manufacturer: VALEO

Vehicle Equipment: for vehicles with air conditioning (manually controlled)

• Diameter [mm]: 145
• Rated Power [W]: 198
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Voltage [V]: 12
• Current Strength [A]: 16.5
• Number of pins: 2
• Number of connectors: 2
• Net Weight [g]: 1,566
• Packaging width [cm]: 21.5
• Packaging length [cm]: 22.5
• Packaging height [cm]: 23
• Name: Salongipuhur
• Manufacturer: BEH MAH

Vehicle Equipment: for vehicles with automatic climate control, for vehicles with air conditioning

• Voltage [V]: 12
• Diameter [mm]: 147
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Supplementary Article/Info 2: with resistor
• Rotation Direction: Anticlockwise rotation
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.