Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Outer Diameter [mm]: 26
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 2
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Manufacturer: BGA
- Lisainfo: OS8325 BGA
- Additional information: OS8325 BGA
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Engine Code: CDLB
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELR
- Additional information: 129.780 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Thickness [mm]: 8.5
- Width [mm]: 26
- Length [mm]: 26
-
Name: Sulgurkate,
nukkvoll - Manufacturer: AJU
- Fitting Position: frontal sided
- Engine Code: CDLB
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Additional information: 81-
34367- 00 REIN -
Lisainfo: 81-
34367- 00 REIN
- Engine Code: CDLB
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Required quantity: 3
- Quantity per packing unit: 3
- Inner Diameter [mm]: 21.5
- Outer Diameter [mm]: 25
- Thickness [mm]: 1.8
-
Material: PTFE
(polytetrafluoroethylene) - Shape: Open form
- Manufacturer: ELRING
-
Fabrication Number: ENK-
VW- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Timing: Timing Belt
- Fitting Position: Exhaust Side
- Number of Teeth: 52
- Outer Diameter [mm]: 131
- Height [mm]: 31.5
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 2
- Engine Code: CDLB
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Connector Shape: oval
-
Fabrication Number: EFR-
VW- 001 - Manufacturer: NTY
-
Name: NTY EFR-
VW- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Connector Shape: oval
- Manufacturer: KAMOKA
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.17
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 39SKV009
- Article number of recommended accessories: TC0110K
- Manufacturer: BGA
- Fitting Position: Cylinder Head
- Weight [kg]: 0.64
-
for OE number: 06H103144J,
06H103144K -
for article number: 120-
09- 056 - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Connector Shape: D Shape
-
Supplementary Article/Supplementary Info: with gasket/
seal - Observe the vehicle manufacturer specifications:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CDLB
- Manufacturer: MAGNETI MARELLI
- Quantity: 1
- General Information: Oil control valve for VVT
- Manufacturer: VIKA
- Number of connectors: 2
- Weight [kg]: 0.16
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 06F 109 257 C
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: CDLB
- for OE number: 06F109257C
- Manufacturer: FAI
-
Operating Mode: Electric-
hydraulic - Valve type: for exhaust valves
- Manufacturer: HEPU
- Version: 91539
- for OE number: 06F109257C
- Manufacturer: MEAT&DORIA
- Valve type: for exhaust valves
- Number of connectors: 2
- Manufacturer: ERA
- Engine Code: CDLB
- Valve type: Control Valve
-
Operating Mode: Electric-
hydraulic - Voltage [V]: 12
- Supplementary Article/Info 2: with seal ring
- Manufacturer: PIERBURG
- Number of Teeth: 19
- Fitting Position: Exhaust Side
- Name: Nukkvolliseadistaja
- Manufacturer: MAX
- Fitting Position: Upper
- Observe the vehicle manufacturer specifications:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Always compare old and new part (in particular OE No.):
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: VDO
- Engine Code: CDLB
- for OE number: 06F109257B
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: FAI
-
Fabrication Number: RKZ-
AU- 002 - Fitting Position: Exhaust Side
- Number of Teeth: 19
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of Teeth: 19
- Fitting Position: Exhaust Side
- Required quantity: 2
- Engine Timing: Timing Chain
- Guarantee: 3 years guarantee
- Weight [kg]: 0.95
- Always compare old and new part (in particular OE No.):
- Name: CE 39SKV533
- Manufacturer: ESEN SKV
- Fitting Position: Intake Side
- for OE number: 06F 109 088J
- Number of Teeth: 19
- Assy./disassy. by qualified personnel required!:
- Supplementary Article/Info 2: Requires special tools for mounting
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: with screw
- Number of Teeth: 19
- Manufacturer: KAMOKA
- Fitting Position: Exhaust Side
- Number of Teeth: 19
- Name: Nukkvolliseadistaja
- Manufacturer: DRM
- Number of Teeth: 19
- General Information: Camshaft adjuster
- Manufacturer: VIKA
- Valve type: for exhaust valves
-
Name: WAEK ROZRZ¤DU VW GOLF 2.0 06-
- Manufacturer: DRM
- Operating Mode: Hydraulic
- Fitting Position: Exhaust Side
- Number of Teeth: 19
- Outer Diameter [mm]: 84
- Supplementary Article/Supplementary Info: with camshaft gear
- Driven Units: Camshaft
- Engine Timing: Timing Chain
- Chain Type: Simplex
- Supplementary Article/Info 2: with screw
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of Teeth: 19
- Weight [kg]: 0.917
- Supplementary Article/Info 2: with screw
- Name: Nukkvolliseadistaja
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Drive Type: Direct
- Operating Mode: Hydraulic
- Number of Teeth: 19
- SVHC: No SVHC present!
- Name: Nukkvolliseadistaja
- Manufacturer: INA
- Valve type: for exhaust valves
- Number of Teeth: 19
- Engine Timing: Timing Chain
- Manufacturer: ASHIKA
- Number of Teeth: 19
- Fitting Position: Exhaust Side
- Manufacturer: HEPU
-
for OE number: 06F109101H,
06F109101K - Manufacturer: AMC
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks