Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) to: 4F-
7- 200 000 - Material: Plastic
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 4F-
7- 200 000 - Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 4F-
7- 200 000 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity: 1
- Material: Plastic
- Weight [kg]: 0.015
- Required quantity: 1
- General Information: retaining spring
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) to: 4F-
7- 200 000 - Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Seal Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 4F-
7- 200 000 - Material: Plastic
- Weight [kg]: 0.015
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Seal Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Surface: nubby
- Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 32,
20 - for OE number: N 906 929 01
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Cylinder Head,
transmission sided - Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: without sensor
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
- Heating/Cooling: with thermal switch connector
-
Fabrication Number: CTM-
VW- 026 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Cylinder Head,
transmission sided - Supplementary Article/Supplementary Info: with seal
- Material: Plastic
-
Fitting Position: transmission sided,
Cylinder Head - Heating/Cooling: with thermal switch connector
- Manufacturer: TOPRAN HANS PRIES
- Lisainfo: 110 362 HP
- Additional information: 110 362 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Heating/Cooling: with thermal switch connector
- Lisainfo: Water flange for cooling system
- Additional information: Water flange for cooling system
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 160
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
- for OE number: 038121132G
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 148
- Supplementary Article/Info 2: without thermostat
- Name: IM 90580
- Manufacturer: ORIGINAL IMPERIUM
- Weight [kg]: 0.145
- for OE number: 038 121 132 G
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Material: Plastic
- Weight [g]: 150
- Length [mm]: 185
- Width [mm]: 90
- Height [mm]: 65
- Manufacturer: 3RG
- Height [mm]: 65
- Length [mm]: 185
- Width [mm]: 90
- Weight [kg]: 0.146
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Cylinder Head,
transmission sided - Housing Type: Synthetic Material Housing
- Supplementary Article/Info 2: without sensor
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks