• not for vehicle type: S6, RS6
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Quantity: 2
• Vehicle Identification Number (VIN) to: 4F-5-046 999
• Vehicle Identification Number (VIN) from: 4F-5-047 000
• Fitting Position: Front Axle
• Thickness [mm]: 80
• Weight [kg]: 0.04
• Required quantity: 2
• General Information: protective pipe; front
• Manufacturer: VIKA

• for OE number: 4D0412137B
• Fitting Position: Front Axle
• Height [mm]: 80
• Material: Plastic
• Weight [g]: 38
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 63
• Name: IM 37423
• Manufacturer: ORIGINAL IMPERIUM

• for PR number: 1BA, 1BE, 1BV
• Block Separation:
• Thickness [mm]: 160
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Name:
• Manufacturer: FEB
• Additional information: FE36604
• Lisainfo: FE36604

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles with sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1BA, 1BE, 1BV
• Block Separation:
• Thickness [mm]: 160
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Name: SW 30 93 6604
• Manufacturer: SWAG

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles with sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without electronic suspension control
• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS

• Suspension: for vehicles without electronic suspension control
• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Manufacturer: SWAG
• Name: SW 30 93 6728

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1BA, 1BE, 1BV
• Block Separation:
• Fitting Position: Rear Axle both sides
• Thickness [mm]: 160
• Weight [kg]: 0.037
• Manufacturer: VAICO

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles with sports suspension General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Height [mm]: 155
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A4/A6/TR/EXEO 04-

• for PR number: 1BK, 1BB, 1BR
• Block Separation:
• Thickness [mm]: 157
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Manufacturer: FEBI

Suspension: for vehicles with electronic suspension control, for vehicles with heavy duty suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Spring Type: for vehicles without air suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 631
• Length 2 [mm]: 387
• Diameter [mm]: 45
• Stanchion Tube Diameter [mm]: 12
• Observe technical data:
• Manufacturer: TRW
• Additional information: JGT1058T
• Lisainfo: JGT1058T

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without sports suspension
• not for vehicle type: S6, RS6
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 560202
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• not for vehicle type: S6, RS6
• Spring Type: for vehicles without air suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Suspension: for vehicles without sports suspension
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without sports suspension
• not for vehicle type: S6, RS6
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DACO GERMANY

• Fitting Position: Rear Axle
• Length [mm]: 631
• Length 2 [mm]: 406
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 7081G

• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Length 1 [mm]: 700
• Length 2 [mm]: 496
• Diameter [mm]: 50
• Stanchion Tube Diameter [mm]: 16
• Thread Size: M12x1.5
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Quantity: 2
• Vehicle Identification Number (VIN) to: 4F-5-006 880, 4F-5-046 999
• Vehicle Identification Number (VIN) from: 4F-5-006 881, 4F-5-047 000
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• General Information: shock absorber; front; gas
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Length [mm]: 698
• Length 2 [mm]: 533
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 50.8
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7301G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Thread Size: M12x1.5
• Piston Rod Length [mm]: 237
• Suspension: for vehicles with standard suspension
• Mounting bores distance [mm]: 45
• Piston Rod Diameter [mm]: 15
• Suspension Strut Outer Diameter [mm]: 47
• Bore Ø 1 [mm]: 12
• Bore Ø 2 [mm]: 12
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Spring Type: for vehicles without air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2.1
• Bore Ø [mm]: 25
• Length 1 [mm]: 412
• Length 2 [mm]: 628
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK297
• Packaging length [cm]: 60
• Packaging width [cm]: 7
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Article number of recommended accessories: 100 412 0048, 100 412 1048, 100 640 0004
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 741 0000, 100 740 0007
• replacement in pairs recommended:
• Name: AMORT
• Manufacturer: MEY

• not for vehicle type: S6, RS6
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• not for vehicle type: S6, RS6
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• Fitting Position: Front Axle
• Spring Type: for vehicles without air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Weight [kg]: 3.3
• Bore Ø [mm]: 35
• Length 1 [mm]: 536
• Length 2 [mm]: 699
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK299, PK363
• Packaging length [cm]: 67.7
• Packaging width [cm]: 13
• Packaging height [cm]: 13
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X216A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV32/15X162A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A6 06.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6 06.04-
(kvaliteediklass: Q)"

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-139968
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A6, SDN 06.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6, SDN 06.04-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X216A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV32/15X141A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-116299
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A6 04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6 04-
(kvaliteediklass: Q)"

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-116312

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Single Tube Upside Down
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A4 04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A4 04-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top yoke, Bottom eye
• Shock Absorber System: Electronically adjustable shock strength
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Fabrication Number: A-AU-004
• Braking/Drive Dynamics: for vehicles with EDC
• paired article number: A-AU-005
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; right; gas
• Manufacturer: VIKA

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Fitting Position: Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Packaging length [cm]: 81.3
• Packaging width [cm]: 16.5
• Packaging height [cm]: 16.5
• Weight [kg]: 4.7
• Net weight [kg]: 4
• Manufactured in: China
• Shock Absorber Mounting Type: Top yoke, Bottom eye
• paired article number: SK-3560
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Fitting Position: Rear Axle Right
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Packaging length [cm]: 81.3
• Packaging width [cm]: 16.5
• Packaging height [cm]: 16.5
• Weight [kg]: 4.7
• Net weight [kg]: 4
• Manufactured in: China
• Shock Absorber Mounting Type: Top yoke, Bottom eye
• paired article number: SK-3561
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Electronically adjustable shock strength
• Manufacturer: VAICO

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.