Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with power steering
- Läbimõõt [mm]: 12
- Filtritüüp: Ühendusfilter
- Piirangutega toode/piirangu info 2: magnetiline
-
Lisainfo: Hydraulic Filter,
steering system -
Additional information: Hydraulic Filter,
steering system
- Number of grooves: 6
-
Name: RIHMARATAS,
ROOLIVOIMENDI PUMP - Manufacturer: MAX
-
Lisainfo: 038145255B/
MG -
Additional information: 038145255B/
MG
- Observe technical data:
- Manufacturer Restriction: VAG
- Cable Length [mm]: 200
- Number of pins: 3
- Socket Width [mm]: 1.6
- Cable Cross Section [mm²]: 0.75
- Supplementary Article/Info 2: with plug
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
- Pressure [bar]: 110
- Operating Mode: Hydraulic
-
Pulleys: without multi-
belt pulley -
Fabrication Number: SPW-
AU- 017 - Manufacturer: NTY
-
Name: NTY SPW-
AU- 017
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Hydraulic
- Pump Type: Vane Pump
- Pressure [bar]: 110
- Rotation Direction: Clockwise rotation
- Bolt Hole Circle Ø [mm]: 50
- Manufacturer: ENERGY
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic Pump,
steering system -
Additional information: Hydraulic Pump,
steering system
- for steering manufacturer: ZF
- New part without deposit:
- Supplementary Article/Supplementary Info: without reservoir
- Pulleys: without belt pulley
- Pressure [bar]: 110
- Rotation Direction: Clockwise rotation
- Assy./disassy. by qualified personnel required!:
-
Name: AB 140-
01- 014 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Operating Mode: Hydraulic
- for OE number: 8E0 145 155 N
- Manufacturer Restriction: ZF
- Pressure [bar]: 120
- Number of inlets/outlets: 2
- Manufacturer: KAMOKA
- Hydraulic connector diameter [mm]: 17.5
-
Exit Thread Size: M16x1,
5 - Pressure [bar]: 120
- Operating Mode: Hydraulic
- Braking/Driving Dynamics: for vehicles without ADS
-
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - Vehicle Equipment: for vehicles with servotronic steering
- Pulleys: without belt pulley
- Manufacturer: METALCAUCHO
- Pressure [bar]: 110
- Operating Mode: Hydraulic
- Material: Aluminium
- Valve Type: Pressure Limiting Valve
- Pulleys: without belt pulley
- Rotation Direction: Clockwise rotation
- Number of inlets/outlets: 1
- Pump Type: Vane Pump
- Guarantee: 3 years guarantee
- New Part:
- Always compare old and new part (in particular OE No.):
- Mounting Points Distance [mm]: 40
- Weight [kg]: 1.82
- Operating Pressure [bar]: 110
- Flow rate [l/h]: 60
- Name: CE 10SKV233
- Manufacturer: ESEN SKV
- Pulleys: without belt pulley
- Belt Pulley Ø [mm]: 16
- Pressure [bar]: 120
- Manufacturer: BGA
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Pressure [bar]: 120
- Number of inlets/outlets: 2
-
Backflow Connector Thread Size: M16x1,
5 - Manufacturer: JPN
- General Information: Power steering pump
- Manufacturer: VIKA
- Pump Type: Vane Pump
- Operating Mode: Hydraulic
- Pulleys: without belt pulley
- Operating Pressure [bar]: 120
- for steering manufacturer: ZF
- Observe system fill quantity:
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN HANS PRIES
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 15
-
Internal Thread Size: M16 x 1,
5 - Rotation Direction: Clockwise rotation
- Number of connectors: 2
- Operating Mode: Hydraulic
- Weight [kg]: 1.622
-
Name: Hdraulikapump,
roolimine - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Operating Mode: Hydraulic
- for steering manufacturer: ZF
- Pressure [bar]: 120
- Net weight [kg]: 1.58
- Manufacturer: ELS
Name: Pump - Roolimine AUDI A4 B6 1.9TDI 00-04 B7 1.9TDI-2.0TDI 04-09 SEAT EXEO 2.0TDI 08-
Price of the deposit will be added in the sum of 12.90€
- General Information: Power steering pump
- Manufacturer: VIKA
- Height [mm]: 107
- Pump Type: Vane Pump
- Observe the vehicle manufacturer specifications:
- Width [mm]: 98
- Operating Mode: Hydraulic
- New Part:
- Adapter Shape: triangular
- Observe mounting information:
- Manufacturer Restriction: ZF
- Length [mm]: 150
- Pressure [bar]: 110
- Pulleys: without belt pulley
- Observe system fill quantity:
- Manufacturer: VAICO
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Number of inlets/outlets: 2
- Suction pipe connector diameter [mm]: 16
-
Backflow Connector Thread Size: M16x1,
5 - Distance from adapter to pump [mm]: 31
- Distance of mounting bores [mm]: 80
- Mounting points diameter [mm]: 8
- Pressure [bar]: 120
- Observe technical data:
- Exchange Part:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Price of the deposit will be added in the sum of 97.14€
- Exchange Part:
- Operating Mode: Hydraulic
- Pump Type: Vane Pump
- Pressure [bar]: 110
- Rotation Direction: Clockwise rotation
- Bolt Hole Circle Ø [mm]: 50
- Manufacturer: BOSCH
Price of the deposit will be added in the sum of 137.31€
- Operating Mode: Hydraulic
- Bolt Hole Circle Ø [mm]: 50
- Operating Pressure [bar]: 120
- Rotation Direction: Clockwise rotation
- Pump Type: Vane Pump
- General Information: Power steering pump
- Manufacturer: BORSEHUNG
- General Information: Power steering pump
- Manufacturer: BORSEHUNG
- Operating Mode: Hydraulic
-
Fabrication Number: SPK-
AU- 002 - Manufacturer: NTY
-
Name: NTY SPK-
AU- 002 -
Lisainfo: UUS TOODE,
vana korpust pole vaja tagastada -
Additional information: UUS TOODE,
vana korpust pole vaja tagastada
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Hydraulic
- Pump Type: Vane Pump
- Pressure [bar]: 110
- Rotation Direction: Clockwise rotation
- Bolt Hole Circle Ø [mm]: 50
- Manufacturer: BOS
Name: Pump - Roolimine AUDI A4 B6 1.9TDI 00-04 B7 1.9TDI-2.0TDI 04-09 SEAT EXEO 2.0TDI 08-
- Operating Mode: Hydraulic
- Used part return not required:
- New Part:
-
Length [mm]: 1,
035 - Assy./disassy. by qualified personnel required!:
-
Name: AB 140-
02- 006 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Operating Mode: Hydraulic
- Manufacturer: JPN
- Operating Mode: Hydraulic
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Vehicle Equipment: for vehicles without servotronic steering
- Manufacturer: JP GROUP
-
Lisainfo: UUS TOODE,
vana korpust pole vaja tagastada -
Additional information: UUS TOODE,
vana korpust pole vaja tagastada
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
-
for steering gear manufacturer: ZF/
KOYO -
Length [mm]: 1,
035 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Input shaft height [mm]: 35
- Number of steering wheel turns: 2.9
- Inlet Ø [mm]: 14
- Outlet Ø [mm]: 16
- Net weight [kg]: 8.17
- Name: ROOLIAJAM
- Manufacturer: ELS
Price of the deposit will be added in the sum of 193.47€
- Operating Mode: Hydraulic
- General Information: Steering gear with rod and dust cover
- Manufacturer: VIKA
- Rakendustüüp: hüdrauliline
- vasak/paremroolimine: vasakpoolse roolimise jaoks
-
Sõidukivarustus: sõidukitele ilma servotronic-
roolimiseta -
roolisüsteemi valmistajale: KOYO,
ZF - Spetsifikatsioon: without damper
- Roolimine: roolvardaga
-
Lisainfo: Roolilatt UUS,
sisemiste rooliotsadega -
Additional information: Roolilatt UUS,
sisemiste rooliotsadega
Price of the deposit will be added in the sum of 75.00€
- Exchange Part:
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Operating Mode: Hydraulic
-
Steering: with tie rod,
without tie rod ends - Manufacturer: BOSCH
Vehicle Equipment: for vehicles without servotronic steering, for vehicles with power steering
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Operating Mode: Hydraulic
-
Steering: with tie rod,
without tie rod ends - Name: ROOLIAJAM
- Manufacturer: BOS
Vehicle Equipment: for vehicles without servotronic steering, for vehicles with power steering
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks