• for PR number: 1KD
• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• Kõrgus (mm): 53
• Laius (mm): 87
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Lisainfo: Brake pad set, rear, 15.2 mm
• Additional information: Brake pad set, rear, 15.2 mm

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• Kõrgus (mm): 55,9
• Laius (mm): 106
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Manufacturer: JP GROUP

Lisainfo: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm Additional information: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm

• Construction Year from: 06.2006
• for PR number: 1KW
• Installatsiooni pool: Tagasild
• Pidurisüsteem: LUCAS/TRW
• Kõrgus (mm): 55,9
• Laius (mm): 105
• Jämedus/Tugevus (mm): 17,1
• Sõidukivarustus: ilma elektrilise seisupidurita sõidukitele
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Manufacturer: JP GROUP
• Lisainfo: 17.2 mm, ilma kulumis andurita
• Additional information: 17.2 mm, ilma kulumis andurita

Lisainfo: Brake Pad Set, disc brake

• Installatsiooni pool: Esisild
• Pidurisüsteem: Teves
• Kõrgus (mm): 74,1
• Laius (mm): 156
• Jämedus/Tugevus (mm): 19,6
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• Lisainfo: Pistik ümmargune.Brake pad set, front, 19.8 mm
• Additional information: Pistik ümmargune.Brake pad set, front, 19.8 mm

• not for country specific design: Japan
• for PR number: 1LB, 1LE
• Installatsiooni pool: Esisild
• Pidurisüsteem: Teves
• Kõrgus (mm): 74
• Laius (mm): 156
• Jämedus/Tugevus (mm): 20,4
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• Manufacturer: JP GROUP
• Lisainfo: Pistik ovaalne,Brake pad set, front, 20.3 mm
• Additional information: Pistik ovaalne,Brake pad set, front, 20.3 mm

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• tootekoodile: V10-8182
• Hoiatuskontakti pikkus (mm): 250
• Piduriliik: Ketaspidur
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• Kõrgus (mm): 53
• Laius (mm): 87
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Lisainfo: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  
• Additional information: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Construction Year from: 06.2006
• Pidurisüsteem: Lucas / TRW
• Laius 1 (mm): 87,6
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 15,2
• Kontrolltähistus: ECE R90
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• for PR number: 1KW
• Construction Year from: 06.2006
• Sõidukivarustus: ilma elektrilise seisupidurita sõidukitele
• Pidurisüsteem: Lucas / TRW
• Laius 1 (mm): 105,3
• Kõrgus (mm): 55,9
• Jämedus/Tugevus (mm): 17,1
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KD, 1KP
• Construction Year from: 06.2006
• Installatsiooni pool: Tagasild
• Laius (mm): 87,6
• Jämedus/Tugevus (mm): 15,2
• Kõrgus (mm): 52,9
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Rear Axle
• for PR number: 1KW
• Construction Year from: 06.2006
• Sõidukivarustus: elektrilise seisupiduriga sõidukile
• Pidurisüsteem: Lucas / TRW
• Laius 1 (mm): 105,2
• Kõrgus (mm): 56,4
• Jämedus/Tugevus (mm): 16,9
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma kulumihoiatuseta Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KD
• Installatsiooni pool: Tagasild
• Laius (mm): 87
• Kõrgus (mm): 53
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Laius (mm): 87
• Jämedus/Tugevus (mm): 15
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Installatsiooni pool: Tagasild
• Laius (mm): 88
• Jämedus/Tugevus (mm): 17
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 17
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piduriklots: Lõigatud servaga
• Tehnilisi andmeid jälgida:
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• Installatsiooni pool: Tagasild
• Laius (mm): 87
• Kõrgus (mm): 53
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 245
• for PR number: 1KD
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 15
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• Fitting Position: Rear Axle
• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Jämedus/Tugevus (mm): 15
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Manufacturer: JPN

• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 17
• Pikkus (mm): 87
• Laius (mm): 53
• Pidurisüsteem: TRW Lucas
• WVA-number: 20961
• OE-numbri jaoks: 4D0698451C
• Manufacturer: ASHIKA-KLOCKI

• for brake disc diameter [mm]: 245
• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 15
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Piirangutega toode/piirangu info 2: ilma kokkusurumisvastase plekita
• Kontrolltähistus: ECE-R90
• WVA-number: 20960
• Kaal (kg): 0,8
• Manufacturer: VALEO
• Name: VA 301180

• for PR number: 1KD
• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 15
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Pidurisüsteem: TRW
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Kaal (kg): 0,73
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 17
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Piduriklots: Lõigatud servaga
• Tehnilisi andmeid jälgida:
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• for PR number: 1KW
• Construction Year from: 06.2006
• Installatsiooni pool: Tagasild
• Laius (mm): 105,2
• Jämedus/Tugevus (mm): 16,9
• Kõrgus (mm): 56,4
• Sõidukivarustus: elektrilise seisupiduriga sõidukile
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN HAMULCE

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• for PR number: 1KD
• Installatsiooni pool: Tagasild
• Kontrolltähistus: R90 Homologated
• Pikkus (mm): 87
• Kõrgus 1 (mm): 53
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Konteineri tüüp: Sahtel
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Jämedus/Tugevus (mm): 15
• Keermestatud varraste arv: 4
• Laius (mm): 53
• Pidurisüsteem: TRW
• WVA-number: 20961
• OE-numbri jaoks: 1H0698451F
• Manufacturer: ASHIKA

• Installatsiooni pool: Tagasild
• Laius (mm): 105
• Jämedus/Tugevus (mm): 17
• Kõrgus (mm): 56
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas - TRW
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Kontrolltähistus: ECE-R90
• Kõrgus 1 (mm): 53,1
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Võnkumine: koos võnkevähendajaga
• Laius 1 (mm): 87,2
• Jämedus/Tugevus 1 (mm): 16
• Manufacturer: METELLI UKL.HAMULCOWY

• for PR number: 1KW
• Construction Year from: 06.2006
• Installatsiooni pool: Tagasild
• Laius (mm): 105,3
• Jämedus/Tugevus (mm): 17,1
• Kõrgus (mm): 55,9
• Sõidukivarustus: ilma elektrilise seisupidurita sõidukitele
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Fitting Position: Rear Axle
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kõrgus 1 (mm): 52,9
• Pidurisüsteem: TRW
• Laius 1 (mm): 87
• Jämedus/Tugevus 1 (mm): 15
• Manufacturer: PROFIPOWER

• for PR number: 1KD
• Installatsiooni pool: Tagasild
• Kontrolltähistus: R90 Homologated
• Pikkus (mm): 87
• Kõrgus 1 (mm): 53
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Konteineri tüüp: Sahtel
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Jämedus/Tugevus (mm): 15
• Keermestatud varraste arv: 4
• Laius (mm): 53
• Pidurisüsteem: TRW
• WVA-number: 20961
• OE-numbri jaoks: 1H0698451F
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• for PR number: 1LZ
• Construction Year from: 06.2006
• Pidurisüsteem: Lucas / TRW
• Laius 1 (mm): 119,1
• Kõrgus (mm): 69,5
• Jämedus/Tugevus (mm): 19,6
• Hoiatuskontakti pikkus (mm): 196
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for brake disc diameter [mm]: 245
• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 17
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Kontrolltähistus: ECE-R90
• WVA-number: 20960
• Kaal (kg): 0,87
• Name: VA 301463
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• for PR number: 1KW
• Quantity per packing unit: 4
• Jämedus/Tugevus (mm): 16,9
• Laius (mm): 105,3
• Kõrgus (mm): 55,5
• Pidurisüsteem: TRW
• Piirangutega toode/piirangu info 2: koos kruvidega
• Name: LPR 05P1219
• Manufacturer: LPR

• for brake disc diameter [mm]: 245
• for PR number: 1KD
• Pikkus (mm): 87
• Laius (mm): 52,9
• Kontrolltähistus: ECE R90 Approved
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus 1 (mm): 15
• Kaal (kg): 0,78
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1KD, 1KP
• Installatsiooni pool: Tagasild
• Laius (mm): 87,1
• Kõrgus (mm): 52,8
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: TRW
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY
• Lisainfo: 0252096117
• Additional information: 0252096117

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: Esisild
• Laius (mm): 119
• Jämedus/Tugevus (mm): 19
• Kõrgus (mm): 70
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Katete arv: 4
• Jämedus/Tugevus (mm): 15
• Pikkus (mm): 87
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piduriklots: Lõigatud servaga
• Pidurisüsteem: TRW
• WVA-number: 20961
• Name: SK VKBP90229
• Manufacturer: SKF

• Fitting Position: Rear Axle
• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 105,5
• Kõrgus (mm): 56
• Jämedus/Tugevus (mm): 17
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Piirangutega toode/piirangu info: koos lisadega
• Tehnilisi andmeid jälgida:
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• Fitting Position: Rear Axle
• for PR number: 1KD
• Laius (mm): 87
• Kõrgus (mm): 53
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• for brake disc diameter [mm]: 245
• for PR number: 1KD
• Pikkus (mm): 87
• Laius (mm): 53
• Kontrolltähistus: ECE R90 Approved
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus 1 (mm): 15
• Kaal (kg): 0,78
• Hooldusinfot jälgida:
• Manufacturer: BLUE PRINT HAMULCE
• Lisainfo: ADR164201 BLUEPRINT
• Additional information: ADR164201 BLUEPRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 280
• for PR number: 1LZ
• Tootja piirang: TRW
• Laius (mm): 119
• Kõrgus (mm): 69,5
• Jämedus/Tugevus (mm): 19,4
• Kulumishoiatus kontakt: koos kulumianduriga
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Hoiatuskontakti pikkus (mm): 210
• Installatsiooni pool: Esisild
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0506
• Additional information: 19-0506

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Laius 1 (mm): 87
• Kõrgus 1 (mm): 52,9
• Jämedus/Tugevus 1 (mm): 15
• Pidurisüsteem: LUCAS/TRW
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kaal (kg): 0,86
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 17
• Pikkus (mm): 87
• Laius (mm): 53
• Pidurisüsteem: TRW Lucas
• WVA-number: 20961
• OE-numbri jaoks: 4D0698451C
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• for PR number: 1LB, 1LE, 1LF, 1LT
• Construction Year from: 06.2006
• Pidurisüsteem: ATE
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Laius 1 (mm): 156,3
• Kõrgus (mm): 74
• Jämedus/Tugevus (mm): 19,8
• Jämedus/Tugevus 2 (mm): 20,3
• Hoiatuskontakti pikkus (mm): 200
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Kõrgus (mm): 56,3
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: Lucas
• Laius (mm): 106
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 245
• for PR number: 1KD
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 15
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Kontrolltähistus: E9 90R 01120/457
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 245
• for PR number: 1KD
• Quantity per packing unit: 4
• Katete arv: 4
• Jämedus/Tugevus (mm): 16,6
• Pikkus (mm): 87
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Piduriklots: Lõigatud servaga
• Pidurisüsteem: TRW
• WVA-number: 20961
• Name: SK VKBP90001
• Manufacturer: SKF

• Installatsiooni pool: Esisild
• Laius (mm): 119
• Jämedus/Tugevus (mm): 19
• Kõrgus (mm): 69
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: Lucas - TRW
• Hoiatuskontakti pikkus (mm): 196
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 06.2006
• Fitting Position: Rear Axle
• Sõidukivarustus: elektrilise seisupiduriga sõidukile
• Jämedus/Tugevus (mm): 16,9
• Laius (mm): 105,2
• Kõrgus (mm): 56,4
• Pidurisüsteem: Lucas / TRW
• Manufacturer: PROFIPOWER

Kulumishoiatus kontakt: ilma kulumihoiatuseta, mitte kulumishoiatusnäidiku jaoks ettevalmistatud

• Fitting Position: Rear Axle
• for PR number: 1KD
• Quantity per packing unit: 4
• Laius (mm): 87
• Jämedus/Tugevus (mm): 15
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: Lucas
• WVA-number: 20961, 23554
• Manufacturer: BREMBO
• Name: BR P 85 017

Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega, koos kokkusurumisvastase plekiga

• for PR number: 1LZ
• Fitting Position: Front Axle
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Tootja piirang: TRW
• Kõrgus 1 (mm): 69,5
• Laius 1 (mm): 118,9
• Jämedus/Tugevus 1 (mm): 19,6
• Manufacturer: PROFIPOWER

• for PR number: 1LB, 1LE, 1LF, 1LT
• Construction Year from: 06.2006
• Installatsiooni pool: Esisild
• Laius (mm): 156,3
• Jämedus/Tugevus (mm): 19,8
• Kõrgus (mm): 74
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: ATE
• Jämedus/Tugevus 2 (mm): 20,3
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Rear Axle
• for PR number: 1KD
• Laius (mm): 87
• Kõrgus (mm): 53
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: Lucas
• Hõõrdkatte materjal: Keraamika
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• for PR number: 1LZ
• Construction Year from: 06.2006
• Installatsiooni pool: Esisild
• Laius (mm): 119,1
• Jämedus/Tugevus (mm): 19,6
• Kõrgus (mm): 69,5
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• for PR number: 1LA, 1LC
• Construction Year from: 06.2006
• Pidurisüsteem: ATE
• Laius 1 (mm): 72,9
• Laius 2 (mm): 72,9
• Jämedus/Tugevus (mm): 20,3
• Hoiatuskontakti pikkus (mm): 243
• Kontrolltähistus: ECE R90
• Kõrgus 1 (mm): 155,1
• Kõrgus 2 (mm): 156,3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 280
• for PR number: 1LZ
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 119
• Kõrgus (mm): 69,5
• Jämedus/Tugevus (mm): 19,4
• Kulumishoiatus kontakt: koos kulumianduriga
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Hoiatuskontakti pikkus (mm): 210
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• for PR number: 1KD
• for brake disc diameter [mm]: 245
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 17
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Piduriklots: Lõigatud servaga
• Kontrolltähistus: E9 90R - 01120/457
• Tehnilisi andmeid jälgida:
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Lisainfo: GDB1330
• Additional information: GDB1330

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• for brake disc diameter [mm]: 245
• Installatsiooni pool: Tagasild
• Pidurisüsteem: LUCAS
• Piirangutega toode/piirangu info 2: koos kruvidega, ilma kokkusurumisvastase plekita
• Laius (mm): 87
• Kõrgus (mm): 52,9
• Jämedus/Tugevus (mm): 15,2
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kontrolltähistus: ECE-R90
• WVA-number: 20960
• Kaal (kg): 0,89
• Manufacturer: VALEO KLOCKI

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• for PR number: 1LB
• Quantity per packing unit: 4
• Tootja piirang: ATE
• Laius (mm): 156,4
• Kõrgus (mm): 74,2
• Jämedus/Tugevus (mm): 19,5
• Kulumishoiatus kontakt: koos kulumianduriga
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Hoiatuskontakti pikkus (mm): 210
• suunatud:
• Tehnilisi andmeid jälgida:
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• for PR number: 1KD, 1KP
• Installatsiooni pool: Tagasild
• Laius (mm): 87,1
• Kõrgus (mm): 52,8
• Jämedus/Tugevus (mm): 17,2
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: TRW
• Piirangutega toode/piirangu info: koos lisadega
• Kvaliteet: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga, koos pidurisadula kruvidega Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 8E0698151B
• Manufacturer: ASHIKA-KLOCKI

• Construction Year from: 06.2006
• for PR number: 1LZ
• Fitting Position: Front Axle
• Kulumishoiatus kontakt: koos kulumianduriga
• Jämedus/Tugevus (mm): 19,6
• Laius (mm): 119,1
• Kõrgus (mm): 69,5
• Pidurisüsteem: Lucas / TRW
• Hoiatuskontakti pikkus (mm): 196
• Kruvide arv: 2
• Manufacturer: JPN

• Installatsiooni pool: Esisild
• Laius (mm): 156
• Jämedus/Tugevus (mm): 20
• Kõrgus (mm): 74
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 200
• Manufacturer: KAMOKA UK£ADY HAMULCOWE