Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Engine Code: BVG
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELRING
- Additional information: 129.780 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: Axle beam
- General Information: Oil seal for camshaft
- Manufacturer: BORSEHUNG
- Required quantity: 2
- Fitting Position: frontal sided
- Engine Code: BVG
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Additional information: 81-
34367- 00 REIN -
Lisainfo: 81-
34367- 00 REIN
- Engine Code: BVG
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
- General Information: camshaft bearing shell; lower
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Required quantity: 1
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Required quantity: 2
- Engine Code: BVG
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Timing: Timing Belt
- Number of Teeth: 44
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 131.8
- Height [mm]: 34.6
- Material: Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BVG
- Quantity: 10
- Quantity Unit: Set
- Name: Nukkvollilaager
- Manufacturer: MVE
- Engine Code: BVG
-
Component Number: 72035600,
72036600, 72037600 - Standard Size [STD]:
- Quantity Unit: Set
- Name: NUKKVOLLILAAGER
- Manufacturer: KS
-
Component Number: 029NB21992000,
029NB21993000 - Packaging height [cm]: 15
- Net Weight [g]: 258
- Packaging width [cm]: 3.5
- Packaging length [cm]: 7.5
- Manufacturer: MAHLE PANEWKI
- Engine Code: BVG
- Quantity per packing unit: 20
- Width [mm]: 22
- for shaft diameter from [mm]: 28.929
- Thickness [mm]: 1.513
- Width 1 [mm]: 25
- Name: PANEWKI WAKA ROZRZ¤DU VW 2.0TDI STD KPL.
- Manufacturer: FAI
- Engine Code: BVG
- Fitting Position: Exhaust Side
- Guarantee: 3 years guarantee
- Weight [kg]: 2.9
- Always compare old and new part (in particular OE No.):
- Name: CE 80SKV029
- Manufacturer: ESEN SKV
- Engine Code: BVG
- Material: Steel
- Fitting Position: Exhaust Side
- Name: NUKKVOLL
- Manufacturer: KS
- Fitting Position: Exhaust Side
- Engine Code: BVG
- Name: Nukkvoll
- Manufacturer: MVE
- Fitting Position: Intake Side
- Length [mm]: 427
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Observe the vehicle manufacturer specifications:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Intake Side
- Engine Code: BVG
- Name: Nukkvoll
- Manufacturer: MVE
- Fitting Position: Intake Side
- Required quantity: 1
- SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
- Engine Code: BVG
-
Additionally required articles (article numbers): R186S/
R187S/ R188S, R189S - Material: Steel
- for OE number: 03G109101A
- Valve Type: for inlet valves
- Manufacturer: FAI
- Fitting Position: Exhaust Side
- Required quantity: 1
- SVHC: No SVHC present!
- Manufacturer: INA
- Engine Code: BVG
-
Additionally required articles (article numbers): R186S/
R187S/ R188S, R189S/ BFS174S - Material: Steel
- for OE number: 03G109102C
- Valve Type: for exhaust valves
- Manufacturer: FAI
- Engine Code: BVG
- Fitting Position: Exhaust Side
- Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Engine Code: BVG
- Fitting Position: Intake Side
- Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks