• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• Colour Coding: black
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour: black
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0107
• Additional information: 21-0107

• Switch point from [bar]: 1.4
• Switch point to [bar]: 1.6
• General Information: Oil pressure sensor; 1.4Bar-1.6Bar
• Manufacturer: VIKA

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: black
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 1,2 - 1,6
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pressure [bar]: 16
• Housing Colour: black
• Thread Size: M10x1.0
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: DE SW90025
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Fabrication Number: ECC-AU-005
• Thread Size: M10x1,0
• Supplementary Article/Info 2: with seal ring
• Number of pins: 1
• Socket colour: black
• Manufacturer: NTY
• Name: NTY ECC-AU-005

• for OE number: 1100619
• Manufacturer: KAMOKA

• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: F18904
• Lisainfo: F18904

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Weight [kg]: 0.02
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: green
• Required quantity: 1
• General Information: Coolant temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 8904
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Switch Pressure [bar]: 1.4
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Plug Type: Round Plug
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Combi Switch Function: Normally Open Contact
• Colour: black
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Thread Size: M10x1,0
• Control Range [bar]: 1,2 - 1,6
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BBJ
• Number of connectors: 4
• Manufacturer: 3RG

• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Control Range [bar]: 1.2/1.6BAR
• Colour: black
• General Information: Oil pressure sensor; 1 pin; black; 1.2-1.6 BAR
• Manufacturer: BORSEHUNG

• Fitted Diameter [mm]: 20
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Cable Length [mm]: 570
• Fabrication Number: ECP-AU-010
• Manufacturer: NTY

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 1.4
• Manufacturer: FAE

• Weight [kg]: 0.02
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: black
• Required quantity: 1
• General Information: Coolant temperature sensor; black; 4 pins
• Manufacturer: VIKA

• Engine Code: BBJ
• for OE number: 06A 906 433 C
• Cable Length [mm]: 570
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Fabrication Number: ECP-AU-032
• Manufacturer: NTY

• Thread Size: 20 mm
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: BBJ
• Colour: black
• Pressure to [bar]: 1.6
• Pressure from [bar]: 1.2
• Pressure [bar]: 1.4
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: BBJ
• Colour: black
• Pressure to [bar]: 1.6
• Pressure from [bar]: 1.2
• Pressure [bar]: 1.4
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BBJ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: BBJ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 2510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BBJ
• Colour: white
• Operating Mode: Mechanical
• Name: LšLITI,SIDURDAMINE(GRA)
• Manufacturer: EPS

• Engine Code: BBJ
• Operating Mode: Mechanical
• Manufacturer: FACET

• Engine Code: BBJ
• Quantity: 2
• Operating Mode: Mechanical
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Colour: blue
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Cable Length [mm]: 570
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity: 1
• Resistor [kOhm]: 0.86
• Cable Length [mm]: 570
• General Information: Crankshaft position sensor
• Manufacturer: VIKA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: Automatic Transmission
• Sensor Type: Passive sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 450
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: black
• Required quantity: 1
• General Information: Coolant temperature sensor; 4 pin; black
• Manufacturer: BORSEHUNG

• Quantity: 1
• General Information: Crankshaft position sensor
• Manufacturer: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: Coolant temperature sensor; 4 pin; green
• Manufacturer: BORSEHUNG

• Number of pins: 3
• Connector Shape: D Shape
• Cable Length [mm]: 570
• Sensor Type: Inductive Sensor
• for OE number: 06A906433C
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Number of pins: 3
• Fabrication Number: ECP-VW-010
• Manufacturer: NTY

• Construction Year to: 02.2006
• Voltage [V]: 12
• Length [mm]: 515
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV213

• Transmission Type: Automatic Transmission
• Cable Length [mm]: 570
• Number of connectors: 3
• Housing Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Transmission Type: Automatic Transmission
• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: NRF KLIMATYZACJA

• Transmission Type: 6-Speed Manual Transmission
• Manufacturer: NRF

• Transmission Type: Automatic Transmission
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Name: CZUJNIK POO½ENIA WAU KORB. VW GOLF 1,6 99-
• Manufacturer: BRM

• Transmission Type: Manual Transmission
• Sensor Type: Passive sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Supplementary Article/Info 2: with cable
• Length [mm]: 570
• Height [mm]: 24
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: VERNET

• Transmission Type: Manual Transmission
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Name: CZUJNIK POO½ENIA WAU KORB. VW 2,4-
• Manufacturer: BRM

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: D Shape
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Transmission Type: Manual Transmission
• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Cable Length [mm]: 542
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"

• Transmission Type: Manual Transmission
• Supplementary Article/Info 2: with cable
• Length [mm]: 450
• Height [mm]: 24
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: VERNET

• Transmission Type: Automatic Transmission
• Length [mm]: 570
• Number of connectors: 3
• Weight [kg]: 0.066
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 900
• Colour: black
• Cable Length [mm]: 570
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.072
• Manufacturer: ERA

• for OE number: 06C 905 163 B
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Length [mm]: 60
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Cable Length [mm]: 532
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Quantity: 1
• Resistor [Ohm]: 13
• Height [mm]: 23.8
• Manufacturer: VERNET

• Number of connectors: 3
• Number of mounting bores: 1
• Fitting Depth [mm]: 24.1
• Cable Length 1 [mm]: 495
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Inductive Sensor
• Connector Shape: D Shape
• Colour: grey/black
• Name: SN CKP154.11
• Manufacturer: SNR

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL
• Lisainfo: VAL254003
• Additional information: VAL254003

• General Information: Crankshaft position sensor
• Manufacturer: VIKA

• Number of pins: 3
• Connector Shape: D Shape
• Cable Length [mm]: 390
• Sensor Type: Inductive Sensor
• for OE number: 078906433B
• Manufacturer: MEAT & DORIA

• Required quantity: 1
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BBJ, ASN
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/blue
• Manufacturer: BREMI

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Engine Code: BBJ
• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Transmission Type: CVT automatic transmission (stepless)
• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 900
• Tolerance [%]: 10
• Cable Length [mm]: 570
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009146251

Brief Information: *** HELLA Electronics OE competence for over 60 years.