Lisainfo: QB11667K

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 16
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Brake System: ATE
• Length [mm]: 140
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Model Year from: 2005
• for combined PR number: 1LB,1LE
• Weight [kg]: 0.015
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• for article number: V10-8182
• Warning Contact Length [mm]: 250
• Brake Type: Disc Brake
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1123
• Lisainfo: QB109-1123

• Fitting Position: Front Axle
• for brake disc thickness [mm]: 25
• for brake disc diameter [mm]: 288, 312
• for PR number: 1LB, 1LF, 1LT
• Brake System: ATE
• Weight [kg]: 0.02
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0210
• Lisainfo: LX0210
• Additional information: LX0210

• Fitting Position: Rear Axle
• Brake System: Lucas
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear Axle
• Brake System: ATE
• Weight [kg]: 0.024
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• for OE number: 1667526
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• for PR number: 1KW
• Fitting Position: Rear Axle
• Brake System: Lucas
• Weight [kg]: 0.039
• Manufacturer: TOMEX C

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: Lucas
• for PR number: 1KW, 2EH
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: Lucas
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2465A

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• for brake disc diameter [mm]: 320
• Fitting Position: Front Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901639

• for PR number: 1LA, 1LC
• Fitting Position: Front Axle
• Brake System: Teves
• Weight [kg]: 0.123
• Manufacturer: TOMEX C

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Manufacturer: NTY

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 288
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left
• Fabrication Number: HTO-AU-010
• Outer Diameter [mm]: 320
• for brake disc diameter [mm]: 280
• paired article number: HTO-AU-011
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Fabrication Number: HTO-AU-011
• Outer Diameter [mm]: 320
• for brake disc diameter [mm]: 280
• paired article number: HTO-AU-010
• Manufacturer: NTY

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 8E-5-400001
• for PR number: 1KW
• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288, 312
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• for brake disc thickness [mm]: 30
• for brake disc diameter [mm]: 320, 345
• for PR number: 1LA, 1LC, 1LJ
• Brake System: ATE
• Weight [kg]: 0.12
• Manufacturer: ABS

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 320
• paired article number: 131-07-191
• Article number of recommended accessories: 231-03-014
• for brake disc diameter [mm]: 280
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 320
• paired article number: 131-07-192
• Article number of recommended accessories: 231-03-014
• for brake disc diameter [mm]: 280
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left, Front Axle, Front Axle Left
• Diameter 1/Diameter 2 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Name: CFD 610214
• Manufacturer: DACO

• Fitting Position: Right, Front Axle, Front Axle Right
• Diameter 1/Diameter 2 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Name: CFD 610215
• Manufacturer: DACO

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Manufacturer Restriction: TEVES, ATE, GIRLING
• for brake disc thickness [mm]: 30, 25, 22
• for brake disc diameter [mm]: 320, 288, 312, 280
• for PR number: 1LA, 1LC, 1LB, 1LE, 1LF, 1LT, 1LZ
• Block Separation:
• Fitting Position: Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV254
• Weight [kg]: 0.35
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Manufacturer Restriction: TEVES, ATE, GIRLING
• for brake disc thickness [mm]: 30, 25, 22
• for brake disc diameter [mm]: 320, 288, 312, 280
• for PR number: 1LA, 1LC, 1LB, 1LE, 1LF, 1LT, 1LZ
• Block Separation:
• Fitting Position: Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV255
• Weight [kg]: 0.35
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Left
• Manufacturer Restriction: ATE, Girling, Teves
• for brake disc diameter [mm]: 280
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• paired article number: V10-5058
• Surface: Stoved Enamel, Zinc-coated
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left
• paired article number: 131-07-194
• for brake disc diameter [mm]: 345
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle Right
• paired article number: 131-07-193
• for brake disc diameter [mm]: 345
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Fabrication Number: HTO-AU-013
• Outer Diameter [mm]: 325
• for brake disc diameter [mm]: 255
• paired article number: HTO-AU-012
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HTO-AU-012
• Outer Diameter [mm]: 325
• for brake disc diameter [mm]: 255
• paired article number: HTO-AU-013
• Manufacturer: NTY

• paired article number: 174902
• Fitting Position: Front Axle Right
• Weight [kg]: 0.396
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Outer Diameter [mm]: 325
• Inner Diameter [mm]: 80
• paired article number: 131-07-699
• Article number of recommended accessories: 231-04-111
• for brake disc diameter [mm]: 255
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Outer Diameter [mm]: 325
• Inner Diameter [mm]: 80
• paired article number: 131-07-700
• Article number of recommended accessories: 231-04-111
• for brake disc diameter [mm]: 255
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• paired article number: 11054
• Weight [kg]: 0.32
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake pads fitting kit
• Quality class: PJ

Additional information: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right
• Surface: Zinc-coated, Stoved Enamel
• Material: Sheet Steel
• paired article number: V10-5057
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8E-7-300000
• for PR number: 1KD, 1KP
• Fitting Position: Rear Axle
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• for brake disc diameter [mm]: 302
• Fabrication Number: HTO-AU-001
• paired article number: HTO-AU-000
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fabrication Number: HTO-AU-006
• paired article number: HTO-AU-007
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fabrication Number: HTO-AU-007
• paired article number: HTO-AU-006
• Manufacturer: NTY

• paired article number: 174903
• Fitting Position: Front Axle Left
• Weight [kg]: 0.396
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Right, Rear Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 255
• Name: CFD 610217
• Manufacturer: DACO

• Fitting Position: Rear Axle, Left, Rear Axle Left
• Material: Sheet Steel
• for brake disc diameter [mm]: 255
• Name: CFD 610216
• Manufacturer: DACO

• for OE number: 8E0927803B
• Cable Length [mm]: 990
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• paired article number: 234773
• for brake disc diameter [mm]: 280
• Diameter 1/Diameter 2 [mm]: 320
• Fitting Position: Front Axle Left
• Net weight [kg]: 0.32
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Manufacturer: BOSCH

• paired article number: 234772
• for brake disc diameter [mm]: 280
• Diameter 1/Diameter 2 [mm]: 320
• Fitting Position: Front Axle Right
• Net weight [kg]: 0.29
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Fitting Position: Front Axle
• Length [mm]: 975
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Sensor Type: Hall Sensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Construction Year to: 02.2006
• Vehicle Identification Number (VIN) from: 8E-5-400001
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Cable Length [mm]: 1,190
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left
• Surface: Stoved Enamel, Zinc-coated
• Material: Sheet Steel
• paired article number: V10-5062
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paired article number: 175139
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.455
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Rear Axle Left
• for brake disc diameter [mm]: 302
• Fabrication Number: HTO-AU-000
• paired article number: HTO-AU-001
• Manufacturer: NTY

• Fitting Position: Front Axle
• Cable Length [mm]: 1,005
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• paired article number: 175138
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.455
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Quantity: 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Cable Length [mm]: 1,190
• Name: CZUJNIK ABS AUDI A4, RS4, S4/ SEAT EXEO, EXEO ST
• Manufacturer: DLP

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Installatsiooni pool: Tagasild
• Garantii: 3 aastat garantii
• Kaal (kg): 0,16
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV352

• for PR number: 1LJ
• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 345
• Guarantee: 3 years guarantee
• paired article number: 57SKV206
• Weight [kg]: 0.5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV207

• for PR number: 1LJ
• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 345
• Guarantee: 3 years guarantee
• paired article number: 57SKV207
• Weight [kg]: 0.37
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV206

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,040
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Right
• for brake disc diameter [mm]: 302
• Name: CFD 610227
• Manufacturer: DACO

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Manufacturer: JPN