• Filter type: Filter Insert
• Height [mm]: 153
• Outer Diameter [mm]: 64.5
• Inner Diameter [mm]: 21
• Name: OLIFILTER
• Manufacturer: ALC

• Engine Code: BPW, BRC
• Filter type: Filter Insert
• Height [mm]: 153
• Outer Diameter [mm]: 64
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 25
• Lisainfo: Oil filter
• Additional information: Oil filter

• Engine Code: BLB, BNA, BRE, BRF
• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter 1 [mm]: 71
• Outer Diameter 2 [mm]: 15
• Inner Diameter [mm]: 33
• Lisainfo: Oil filter
• Additional information: Oil filter

Lisainfo: HU 726/2 X MAN

• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter [mm]: 71
• Sealing Ring Diameter [mm]: 29
• Manufacturer: KAMOKA
• Additional information: KAOF100901
• Lisainfo: KAOF100901

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 141
• Inner Diameter [mm]: 33
• Outer Diameter [mm]: 71
• Outer Diameter 1 [mm]: 15
• Name: OLIFILTER
• Manufacturer: MAX

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 153
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 64
• Inner Diameter 1 [mm]: 25
• Name: OLIFILTER
• Manufacturer: MAX
• Lisainfo: OF-355
• Additional information: OF-355

• Filter type: Filter Insert
• for OE number: 1100696
• Height [mm]: 156
• Outer Diameter [mm]: 65
• Manufacturer: KAMOKA

• Filtritüüp: Filtrer
• Manufacturer: JPN

• Engine Code: BPW / BRC
• Height [mm]: 153
• Inner Diameter [mm]: 25
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 25
• Outer Diameter [mm]: 64
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter 1 [mm]: 71
• Inner Diameter 1 [mm]: 33
• Inner Diameter 2 [mm]: 15
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 154
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 22
• Fitted Diameter [mm]: 40
• for OE number: 074115562
• Manufacturer: ASHIKA

• Height [mm]: 141
• Inner Diameter [mm]: 33
• Outer Diameter [mm]: 71
• Outer Diameter 1 [mm]: 15.2
• Filter type: Filter Insert
• Name: BM FL0139
• Manufacturer: BREMSI

• Filter type: Filter Insert
• Height [mm]: 143
• Inner Diameter [mm]: 29
• Outer Diameter 1 [mm]: 16
• Outer Diameter [mm]: 71
• Supplementary Article/Info 2: with seal ring
• Manufacturer: VASCO BREYKO

• Filter type: Filter Insert
• Height [mm]: 153
• Outer Diameter 1 [mm]: 64
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 25
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 154
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 22
• Fitted Diameter [mm]: 40
• for OE number: 074115562
• Manufacturer: JAPKO

• Engine Code: BPW, BRC
• Height [mm]: 155.5
• Outer Diameter 1 [mm]: 64.5
• Inner Diameter 1 [mm]: 25.5
• Inner Diameter 2 [mm]: 25.5
• Filter type: Filter Insert
• Name: CFD DFO0202
• Manufacturer: DACO

• Height [mm]: 153
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 64
• Inner Diameter 1 [mm]: 25
• Filter type: Filter Insert
• Name: BM FL0134
• Manufacturer: BREMSI

• Height [mm]: 141
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 72
• Filter type: Filter Insert
• Manufacturer: KAVO PARTS

• Engine Code: BLB, BNA, BRE, BRF
• Height [mm]: 143
• Diameter 2 [mm]: 16
• Diameter 3 [mm]: 29
• Outer Diameter [mm]: 71
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Filter type: Filter Insert
• Inner Diameter [mm]: 29
• Height [mm]: 141
• Outer Diameter [mm]: 71
• Sealing Ring Diameter [mm]: 74
• Weight [kg]: 0.072
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: OLIFILTER
• Manufacturer: BLP
• Additional information: ADA102101
• Lisainfo: ADA102101

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BPW, BRC
• Filter type: Filter Insert
• Height [mm]: 156
• Outer Diameter [mm]: 65
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 26
• Weight [kg]: 0.101
• Manufacturer: VALEO
• Name: VA 586502

• Filter type: Filter Insert
• Outer Diameter 1 [mm]: 72
• Inner Diameter 1 [mm]: 54
• Height [mm]: 143
• Manufacturer: KOLBENSCHMIDT

• Engine Code: BPW, BRC
• Height [mm]: 154
• Diameter 2 [mm]: 26
• Diameter 3 [mm]: 26
• Outer Diameter [mm]: 66
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Quantity per packing unit: 40
• Filter type: Filter Insert
• Height [mm]: 140.5
• Outer Diameter [mm]: 70.5
• Inner Diameter [mm]: 34
• Manufacturer: SCT MANNOL

• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 71
• Sealing Ring Diameter [mm]: 74
• Weight [kg]: 0.072
• Supplementary Article/Info 2: with seal ring
• Name: OLIFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Height [mm]: 141
• Outer Diameter [mm]: 71
• Inner Diameter [mm]: 16
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 48
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VALEO
• Name: VA 586506

• Engine Code: BNA, BRF
• Height [mm]: 141
• Filter type: Filter Insert
• Diameter 1 [mm]: 15
• Diameter 2 [mm]: 29
• Outer Diameter [mm]: 71
• Manufacturer: MAGNETI MARELLI
• Name: MM 71758822
• Additional information: 152071758822
• Lisainfo: 152071758822

• Engine Code: BPW, BRC
• Filter type: Filter Insert
• Height [mm]: 154
• Outer Diameter 1 [mm]: 65
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 26
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: BLB, BNA, BRE, BRF
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 71
• Inner Diameter 1 [mm]: 29
• SVHC: No SVHC present!
• Manufacturer: FILTRON
• Lisainfo: OE 650/1 FIL
• Additional information: OE 650/1 FIL

• Engine Code: BNA, BRF
• Filter type: Filter Insert
• Height [mm]: 142
• Outer Diameter [mm]: 71.5
• Inner Diameter [mm]: 29.3
• Name: OLIFILTER
• Manufacturer: ALC

• Outer Diameter [mm]: 71
• Supplementary Article/Supplementary Info: with gasket/seal
• Filter type: Filter Insert
• Height [mm]: 141
• Inner Diameter [mm]: 29
• Name: OLIFILTER
• Manufacturer: MEY

• Filter type: Filter Insert
• Height [mm]: 142
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 71
• Lisainfo: (kvaliteediklass: PJ)
• Name: Oil filter
• Quality class: PJ
• Additional information: (kvaliteediklass: PJ)

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 155
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 26
• Version: x2 O'rings included
• Packing Type: Carton
• Packaging length [cm]: 6.8
• Packaging width [cm]: 6.8
• Packaging height [cm]: 16
• Name: CH COF100505E
• Manufacturer: CHAMPION

• Engine Code: BNA, BRF
• Height [mm]: 155
• Filter type: Filter Insert
• Diameter 1 [mm]: 25
• Diameter 2 [mm]: 25
• Outer Diameter [mm]: 64
• Manufacturer: MAGNETI MARELLI
• Name: MM 71758807

• Quantity per packing unit: 40
• Height [mm]: 154
• Diameter 1 [mm]: 65
• Diameter 2 [mm]: 26
• Filter type: Filter Insert
• Manufacturer: SCT MANNOL

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 141
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 16
• Packing Type: Carton
• Packaging length [cm]: 8.7
• Packaging width [cm]: 8.7
• Packaging height [cm]: 15.5
• Sealing Ring Diameter from [mm]: 29.5
• Sealing Ring Diameter up to [mm]: 53
• Name: CH COF100525E
• Manufacturer: CHAMPION

• Filtritüüp: Filtrer
• Kõrgus (mm): 155,5
• Välisläbimõõt [mm]: 64,5
• Siseläbimõõt 1 [mm]: 25,5
• Siseläbimõõt 2 (mm): 25,5
• Manufacturer: PROFIPOWER

• Height [mm]: 140.5
• Inner Diameter [mm]: 33.3
• Outer Diameter [mm]: 70.5
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 15.2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Diameter [mm]: 71
• Height [mm]: 141
• Diameter 2 [mm]: 15
• Height 1 [mm]: 95
• General Information: Oil filter element; waved paper filter
• Manufacturer: VIKA

• Filtritüüp: Filtrer
• Kõrgus (mm): 141
• Välisläbimõõt [mm]: 71
• Siseläbimõõt 1 [mm]: 16
• Siseläbimõõt 2 (mm): 29
• Manufacturer: PROFIPOWER

• Engine Code: BLB, BNA, BRE, BRF
• Filter type: Filter Insert
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 35
• Inner Diameter 1 [mm]: 34.5
• Height [mm]: 141
• Manufacturer: HENGST FILTER
• Lisainfo: E19H D83
• Additional information: E19H D83

• Height [mm]: 125
• Inner Diameter [mm]: 31
• Filter type: Filter Insert
• Inner Diameter 1 [mm]: 31
• Supplementary Article/Supplementary Info: with gasket/seal
• Outer Diameter [mm]: 63.5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 141
• Height 1 [mm]: 95
• Outer Diameter [mm]: 71
• Outer Diameter 2 [mm]: 15
• Name: OLIFILTER
• Manufacturer: BOS

• Engine Code: BPW / BRC
• Filter type: Filter Insert
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 26
• Inner Diameter 1 [mm]: 26
• Height [mm]: 153
• Manufacturer: HENGST FILTER

• Filter type: Filter Insert
• Diameter [mm]: 71.5
• Height [mm]: 140.7
• Inner Diameter 2 [mm]: 29
• Inner Diameter 3 [mm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Packaging height [cm]: 14.5
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Net Weight [g]: 79
• Name: KN OX188D
• Manufacturer: KNECHT

• Engine Code: BLB, BNA, BRE, BRF
• ELi tooteohutuse määrus (GPSR): IEC 60417-6183 nõutavad mehaanikaalased teadmised
• Filtritüüp: Filtrer
• Piirangutega toode/piirangu info: koos tihendiga
• Kõrgus (mm): 141
• Siseläbimõõt [mm]: 33
• Välisläbimõõt [mm]: 71
• Välisläbimõõt 1 [mm]: 15
• SVHC: SVHS aineid ei esine
• Name: OLIFILTER
• Manufacturer: MAN

• Engine Code: BPW, BRC
• ELi tooteohutuse määrus (GPSR): IEC 60417-6183 nõutavad mehaanikaalased teadmised
• Filtritüüp: Filtrer
• Soovitatava eritööriista tootenumber: LS 7
• Piirangutega toode/piirangu info: koos tihendiga
• Kõrgus (mm): 153
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 64
• Siseläbimõõt 1 [mm]: 17
• SVHC: SVHS aineid ei esine
• Name: OLIFILTER
• Manufacturer: MAN

• Filtritüüp: Filtrer
• Kõrgus (mm): 142
• Välisläbimõõt [mm]: 71
• Siseläbimõõt [mm]: 28
• Läbimõõt 3 (mm): 15
• Manufacturer: PURFLUX

• Filter type: Filter Insert
• Diameter [mm]: 71.5
• Height [mm]: 140.7
• Inner Diameter 2 [mm]: 29
• Inner Diameter 3 [mm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Net Weight [g]: 79
• Packaging height [cm]: 14.5
• Packaging width [cm]: 7.5
• Packaging length [cm]: 7.5
• Manufacturer: MAHLE KNECHT

• Filter type: Filter Insert
• Height [mm]: 142
• Outer Diameter [mm]: 71
• Inner Diameter [mm]: 28
• Diameter 3 [mm]: 15
• Name: Oil filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
TRANSPORTER V PLATFO
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
TRANSPORTER V PLATFO
(kvaliteediklass: PJ)"

• Filter type: Filter Insert
• Diameter [mm]: 71
• Height [mm]: 141
• Diameter 2 [mm]: 15
• Height 1 [mm]: 95
• General Information: Oil filter element
• Manufacturer: VIKA

• Name: Oil filter
• Quality class: Q

Lisainfo: "Tootja: BOSCH
A4 (8K2), 11.07-
(kvaliteediklass: Q)"