• Inner Diameter [mm]: 43.95
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• Inner Diameter [mm]: 57.85
• Manufacturer: JP GROUP
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• for OE number: 8E0145832N
• Manufacturer: KAMOKA

• Braking/Driving Dynamics: for vehicles without ABS
• Inner Diameter [mm]: 58.5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Inner Diameter [mm]: 44
• Outer Diameter [mm]: 53
• Manufacturer: FEBEST

• Inner Diameter [mm]: 57.85
• Material: FPM (fluoride rubber)
• Manufacturer: ELRING

• for PR number: TR0
• Inner Diameter [mm]: 58
• Manufacturer: FEBEST

• Inner Diameter [mm]: 57.85
• Manufacturer: DR MOTOR

• for OE number: 3C0145117J
• Weight [g]: 11
• Name: IM 20280
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV454
• Manufacturer: ESEN SKV

• Inner Diameter [mm]: 57.85
• Shape: Ring Form
• Material: FPM (fluoride rubber)
• Always compare old and new part (in particular OE No.):
• Alternative Repair Kit: 2400113, 2400118, 2400119, 2400129, 2400277
• Manufacturer: METZGER

• for OE number: 3C0145117F
• Weight [g]: 47
• Name: IM 20282
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Quantity per packing unit: 10
• Diameter [mm]: 44
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 8E0 145 837 G
• Manufacturer: KAMOKA

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Material: Rubber
• Quality class: PJ
• Name: Intercooler hose

• Length [mm]: 202
• for OE number: 8E0 145832 N
• Outer Diameter 1 [mm]: 26
• Outer Diameter 2 [mm]: 32
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Thickness [mm]: 4.6
• Width [mm]: 58
• Length [mm]: 65.5
• Manufacturer: AJU

Name: USZCZELKA PRZEWODU CHODNICY POWIETRZA VW GOLF 1,9TDI 97-

• Quantity per packing unit: 10
• Diameter [mm]: 56
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 3B0 145 838 A
• Materjal: kumm koos koekihiga
• Ühenduse läbimõõt (survepool) [mm]: 57
• Ühenduse läbimõõt (imipool) [mm]: 63
• Seerianumber: GPP-VW-018
• Manufacturer: NTY

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 220
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Manufacturer: GATES

• Materjal: kumm koos koekihiga
• Ühenduse läbimõõt (survepool) [mm]: 52
• Ühenduse läbimõõt (imipool) [mm]: 61
• Seerianumber: GPP-AU-014
• Manufacturer: NTY
• Name: NTY GPP-AU-014

• Quantity per packing unit: 5
• Shape: O-Ring
• Inner Diameter [mm]: 58
• Thickness [mm]: 4.5
• Material: FPM (fluoride rubber)
• Alternatively:

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Colour: black
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 19
• Material: PE (Polyethylene)
• Manufacturer: BORG & BECK

• for OE number: 03G103493T
• Name: Laadimisohu voolik
• Manufacturer: MD

• Fitting Position: Lower
• Weight [kg]: 0.25
• Weight [g]: 250
• Manufacturer: METALCAUCHO

• Material: Rubber with fabric lining
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 053-028-024

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 3B0145838A
• Manufacturer: KAMOKA

• for PR number: TR0
• Quantity: 10
• Inner Diameter [mm]: 58.5
• Outer Diameter [mm]: 69.1
• Thickness [mm]: 4.6
• Manufacturer: FEBEST

• Turbocharger Line: Cold Side, Piping to engine block
• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 47
• Inner Diameter 2 [mm]: 50
• Manufacturer: DENCKERMANN FILTRY

• for OE number: 3B0 145838 A
• Fitting Position: Upper
• Length [mm]: 185
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 64
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Quantity per packing unit: 5
• Inner Diameter [mm]: 43.95
• Quantity: 5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: DRM

• Production date from: 01/05
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 8E0145837G
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Fitting Position: Upper, Right, Rear
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Fitting Position: Upper, engine sided
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Turbocharger Line: Hot Side, Turbocharger to piping
• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 43
• Manufacturer: DENCKERMANN FILTRY

• for OE number: 8E0145837G
• Weight [g]: 290
• Length [mm]: 227
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Name: IM 221949
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Length [mm]: 185
• Material: AEM (Ethylene Acrylate Rubber)
• for OE number: 3B0 145838 A
• Fitting Position: Upper
• Supplementary Article/Info 2: with clamp
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 64
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 52
• Connection Diameter (suction side) [mm]: 61
• Manufacturer: FAST

• for OE number: 3B0145838A
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 63
• Manufacturer: YSPARTS

Manufacturer: FAST

• Fitting Position: Centre
• Cooling Hose: Piping to charge air cooler, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV117
• Manufacturer: ESEN SKV

• for OE number: 3B0 145 838 A
• Material: Rubber with fabric lining
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: TRU

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Fitting Position: Right Front
• Cooling Hose: Turbocharger to piping, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV031

• Model Year from: 2004
• Transmission Type: Manual Transmission
• for OE number: 8E0 145 834 AR
• Length [mm]: 364
• Outer Diameter 1 [mm]: 51
• Outer Diameter 2 [mm]: 64
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 8E0145834AQ
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Cold Side, Charge air cooler to piping
• for OE number: 8E0 145 737 E
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Production date from: 01/05
• Fitting Position: Outlet
• for OE number: 8E0145834AR
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

Manufacturer: YSPARTS

• OE-numbri jaoks: 8E0145834AQ
• Installatsiooni pool: Kompressoriõhu radiaator, all
• Hulgaühik: Tükk
• Kaal (g): 340
• Materjali 1. kiht: ACM((Polyacryl-Kautschuk)
• Materjali 2. kiht: Aramiid
• Materjali 3. kiht: ACM((Polyacryl-Kautschuk)
• Name: Laadimisohu voolik
• Manufacturer: IBR

• for OE number: 8E0145834Q
• Weight [g]: 315
• Plug connector manufacturer: HENN
• Length [mm]: 279
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 43
• Name: Laadimisohu voolik
• Manufacturer: IMP

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• for OE number: 8E0145745B
• Weight [g]: 560
• Plug connector manufacturer: HENN
• Length [mm]: 428
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 54
• Name: Laadimisohu voolik
• Manufacturer: IMP

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Cold Side, Piping to engine block
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 47
• Inner Diameter 2 [mm]: 50
• Observe broschure:
• Manufacturer: GATES

Manufacturer: YSPARTS

• Fitting Position: Lower Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 5
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 65
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV509

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Production date from: 01/05
• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 8E0145737E
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Weight [kg]: 0.37
• Weight [g]: 370
• Manufacturer: METALCAUCHO

• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 53
• Turbocharger Line: Cold Side
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• for OE number: 3B0 145 838 A
• Fitting Position: Exhaust Turbocharger, Upper
• Supplementary Article/Supplementary Info: with quick coupling
• Supplementary Article/Info 2: without clamp
• Article number of recommended accessories: 2400580
• Manufacturer: METZGER

• Compression ring material: Stainless Steel
• Fitting Position: Upper, Front
• Material: Rubber with fabric lining
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 455
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 53.5
• Observe broschure:
• Manufacturer: GATES

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Compression ring material: Stainless Steel
• for OE number: 8E0 145 737 E
• Material: Rubber with fabric lining
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: Silicone
• Supplementary Article/Info 2: with hose clip
• Colour: black
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 43
• Observe broschure:
• Manufacturer: GATES-PRZEWODY

• Construction Year from: 06.2006
• Construction Year to: 03.2008
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: Silicone
• Colour: black
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 43
• Observe broschure:
• Manufacturer: GATES

• Quantity per packing unit: 100
• Shape: O-Ring
• Inner Diameter [mm]: 58
• Thickness [mm]: 4.5
• Material: FPM (fluoride rubber)