Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Upper,
Rear, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Lisainfo: AUDI A4 AVANT / QUATTRO
- Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, Front, inner, both sides - Article number of recommended accessories: 39430 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSAT 97- - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, inner -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front, rear -
Additional information: Rubber mount for wishbone,
front, rear
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Lisainfo: Rubber mount for wishbone, front
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, inner -
Additional information: Rubber mount for wishbone,
front, inner
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Centre,
Lower Front Axle - Axle alignment required after fitting:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Lower Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
- Vehicle Identification Number (VIN) from: 8E1000001
- Vehicle Identification Number (VIN) to: 8E5400000
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Height [mm]: 40
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Weight [kg]: 0.07
-
Name: DY 37-
06034- 5 - Manufacturer: DYS
-
Fitting Position: Front Axle,
outer, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 40
- Thickness 1 [mm]: 37
- Manufacturer: DELPHI
- Name: DE TD475W
- Quantity per packing unit: 2
- Diameter [mm]: 46
-
Mounting Type: Rubber-
Metal Mount - Height [mm]: 40
- Axle alignment required after fitting:
-
Fitting Position: both sides,
inner, Upper Front Axle - Control/Trailing Arm Type: for control arm
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Upper - Manufacturer: GSP
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.074
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: FEB
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Manufacturer: GSP ZAWIESZENIE
- alternatively:
- Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Name: DE TD437W
Fitting Position: Front Axle, inner, in front of axle, behind the axle, Upper
-
Fitting Position: Rear Axle Lower,
inner, Lower - Manufacturer: GSP
- Width [mm]: 37
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.065
- Name: SW 32 60 0003
- Manufacturer: SWAG
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Lower
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 36
- Manufacturer: KAMOKA
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Upper, inner, outer - Thickness [mm]: 46
-
Outer Diameter [mm]: 36,
26 - Inner Diameter [mm]: 12
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.5
- for OE number: 8E0407181C
- paired article number: 9001539
- Manufacturer: SASIC
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
- Quantity per axle: 2
- Article number of recommended accessories: 39430 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 01- DOLNE - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle both sides,
Upper - Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 46
- Height [mm]: 40
- Name: ALT 80928AL
- Manufacturer: ALTE AUTOMOTIVE
- Construction Year from: 04.2006
- Height 1 [mm]: 40
- Height 2 [mm]: 26
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Manufacturer: KAVO
Fitting Position: Front Axle, inner, Upper, in front of axle, behind the axle
-
Fitting Position: Upper Front Axle,
inner -
Material: Rubber/
Metal - Outer Diameter [mm]: 46
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Total Length [mm]: 60
- Outer Diameter [mm]: 43.8
- Inner Diameter [mm]: 12.2
- Name: COC 80005087
- Manufacturer: CORTECO
- Height [mm]: 37
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: MEY
Fitting Position: outer, Front, Lower, Front Axle Left, Front Axle Right
-
Installatsiooni pool: kahepoolne,
ees, taga, esisild peal - Pikkus 2 [mm]: 26
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
- vajaminev tükihulk: 2
-
Kaal (kg): 0,
08 - Pikkus 1 [mm]: 40
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Width 1 [mm]: 32
- Width 2 [mm]: 60
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829009710
-
Fitting Position: Front Axle,
Front, inner, Right, Left - Outer Diameter [mm]: 50.2
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.2
- Name: COC 21652815
- Manufacturer: CORTECO
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 0 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 0 - Suspension: for vehicles without sports suspension
-
Installatsiooni pool: esisild mõlemapoolselt,
üleval, sees -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
-
Kaal (kg): 0,
086 - Pikkus (mm): 40
- Manufacturer: RTS SA
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MEY
Fitting Position: outer, Front, Rear Axle Right, Rear Axle Left, Lower
-
Fitting Position: Rear Axle,
outer - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 12
- Thickness 1 [mm]: 46
- Manufacturer: DELPHI
- Name: DE TD1246W
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 44
- Height [mm]: 60
- Name: ALT 98282AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
inner, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 60
- Manufacturer: DELPHI
- Name: DE TD440W
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Name: SW 30 60 0031
- Manufacturer: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: outer,
Rear Axle both sides, Lower - Required quantity: 2
- Name: SK VKDS431017
- Manufacturer: SKF
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
-
Fitting Position: inner,
Front, Front Axle both sides, Lower - Weight [kg]: 0.202
- Length [mm]: 60
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- General Information: Bush for control arm
- Manufacturer: VIKA
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Name: DE TD871W
Fitting Position: Front Axle, inner, in front of axle, behind the axle, Upper
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Manufacturer: SCHAEFFLER POLSKA
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 44
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 38
- Manufacturer: BGA
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
- Name: SW 30 93 0687
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 60
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 50
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: MEY
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, inner General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Vehicle Identification Number (VIN) from: 8E5400001
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
26 -
Material: Rubber/
Metal - Weight [kg]: 0.073
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: FEB
Fitting Position: Rear Axle Left, Upper, inner, outer, Rear Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left - Height [mm]: 46
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MEY
- Fitting Position: Lower
- General Information: Bush for wishbone arm
- Manufacturer: VIKA
-
Fitting Position: Rear Axle,
inner, Left, Right, Upper, outer -
Fabrication Number: ZTT-
CH- 006D - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle,
inner - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 36
- Thickness 1 [mm]: 46
- Manufacturer: DELPHI
- Name: DE TD1301W
- Construction Year from: 04.2006
-
for OE number: 8E0505311AF,
8E0505312AF -
Fitting Position: Front,
Rear Axle Lower, outer - Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Lower, Front, outer -
Mounting Type: Rubber-
Metal Mount, Pressed - Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 40.3
- Width 1 [mm]: 37
- Width 2 [mm]: 31
- SVHC: No SVHC present!
- Name: LU 829063910
- Manufacturer: FAG
-
Fitting Position: Front Axle Right,
Front Axle Left, Centre - Name: COC 49400197
- Manufacturer: CORTECO
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.2
- Length [mm]: 37
- paired article number: 270702
- Weight [kg]: 0.07
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, outer, Lower
-
Fitting Position: Front Axle,
inner, Lower, Rear - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 65
- Thickness 1 [mm]: 80
- Name: DE TD1366W
- Manufacturer: DELPHI
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Manufacturer: KAMOKA
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, sees, ees -
Välisläbimõõt [mm]: 50,
3 -
Siseläbimõõt [mm]: 12,
2 - Pikkus (mm): 60
-
Kaal (kg): 0,
202 - Manufacturer: RTS SA
- Thickness [mm]: 46
- Inner Diameter [mm]: 12.3
-
Outer Diameter [mm]: 36.5,
26 -
Material: Rubber/
Metal - Weight [kg]: 0.07
- Name: SW 30 93 0494
- Manufacturer: SWAG
Fitting Position: Rear Axle Left, Upper, inner, outer, Rear Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65.2
- Material: Aluminium
-
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.45
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4 04- - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- for PR number: TK7
- Model Year from: 2006
-
Fitting Position: Front,
Rear, Upper Front Axle, outer - Manufacturer: FEBEST
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Length [mm]: 37.8
- Width [mm]: 40
- Thickness [mm]: 38
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 40
-
Material: Rubber/
Metal - Weight [kg]: 0.13
- Name: Puks
- Manufacturer: FEB
Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Left, Front Axle - Required quantity: 2
- Total Length [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12.1
- Name: COC 80004744
- Manufacturer: CORTECO
-
Fitting Position: Front Axle,
Lower, Front, inner - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Height [mm]: 60
- Name: ALT 80990AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, outer - for OE number: 4D0 407 182 E
- Manufacturer: GSP
-
Fitting Position: Rear Axle,
both sides, Lower, outer -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 41.3
- Width [mm]: 45
- SVHC: No SVHC present!
- Manufacturer: FAG
-
for OE number: 8E0407693AL,
8E0407694AL -
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Front Axle,
Lower, both sides, Rear, inner - Length [mm]: 56
- Overall Length [mm]: 79.3
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 27
- Outer Diameter [mm]: 63.4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: Rear Axle Upper,
Rear, outer - Manufacturer: FEBEST
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: inner,
Rear Axle Lower, Centre - Manufacturer: FEBEST
- Length [mm]: 37.8
- Width [mm]: 40.4
- Thickness [mm]: 37.8
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 40
-
Material: Rubber/
Metal - Weight [kg]: 0.13
- Name: SW 30 10 4781
- Manufacturer: SWAG
Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 45
- Width [mm]: 42
- Thickness [mm]: 45
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 41.5
-
Material: Rubber/
Metal - Weight [kg]: 0.25
- Name: Puks
- Manufacturer: FEB
Fitting Position: Rear Axle Left, Lower, Rear, outer, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik AUDI P. A6 04- 11 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Braking/Driving Dynamics: for vehicles with ABS
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 50.4
- Length [mm]: 60
- paired article number: 270327
- Weight [kg]: 0.21
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Fitting Position: Lower,
inner, both sides, Front Axle, Rear - Outer Diameter [mm]: 65.1
- Length 2 [mm]: 56
- Inner Diameter [mm]: 12
- Weight [kg]: 0.3
- Required quantity: 2
- Length 1 [mm]: 80
- Manufacturer: TEDGUM
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: Rear Axle Lower,
Upper, outer, Centre - Manufacturer: FEBEST
-
Fitting Position: Front Axle,
both sides, Upper - Control/Trailing Arm Type: Control Arm
- Required quantity: 4
- Height [mm]: 40
- Outer Diameter [mm]: 46.3
- Inner Diameter [mm]: 10.1
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.102
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 65
- Height [mm]: 79.9
- Name: ALT 84083AL
- Manufacturer: ALTE AUTOMOTIVE
-
Production date from: 09/
04 -
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- for OE number: 4F0407183E
- Manufacturer: SASIC
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
for OE number: 8E0501529G,
8E0501529K, 4F0501529C - Manufacturer: TRW
Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, outer SVHC: No information available, please contact the manufacturer!
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.5
- Length [mm]: 80
- paired article number: 270760
- Weight [kg]: 0.29
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner, Lower
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4 04- - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Braking/Driving Dynamics: for vehicles without ABS
- Model Year from: 2006
-
Fitting Position: inner,
Front, Rear Axle Lower - Name: Puks
- Manufacturer: MAX
- for PR number: D0W
- Model Year from: 2006
- Quantity: 10
- Length [mm]: 40
- Thread Size: M6x1
- Manufacturer: FEBEST
-
Lisainfo: 2398-
002- PCS10 FEBEST -
Additional information: 2398-
002- PCS10 FEBEST
-
Fitting Position: Lower Front Axle,
inner, Lower - Manufacturer: GSP
- for PR number: TK7
- Model Year from: 2006
-
Fitting Position: behind the axle,
Rear, Lower Front Axle - Inner Diameter [mm]: 65
- Manufacturer: FEBEST
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 05-/A6 04-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 05-/A6 04-
(kvaliteediklass: PJ)"
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: Rear Axle Lower,
Rear, inner - Manufacturer: FEBEST
-
Additional information: FSTADAB-
002 -
Lisainfo: FSTADAB-
002
-
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Manufacturer: SKF
- Name: SK VKDS331014
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 63
-
Name: Puks -
Kndmik VW P. A4 04- DOLNY TY L/ P 62, 5MM - Manufacturer: MAX
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: Rear Axle Lower,
outer, Lower - Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Width [mm]: 80
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- HD - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- Model Year from: 2006
-
for combined PR number: 2MC,
2ME -
Fitting Position: inner,
Rear Axle Lower, Front - Manufacturer: FEBEST
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks