Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Switch pressure from [bar]: 0.55
- Switch pressure to [bar]: 0.85
- Colour Coding: brown
- Number of connectors: 1
- External Thread [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Number of pins: 4
- Colour Coding: green
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 4 pins
- Additional information: Sender for water temperature gauge 4 pins
- Engine Code: BKE
- Pressure [bar]: 1
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
- Quantity: 1
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Quantity: 1
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
55 - 0, 85 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ECC-
AU- 004 - Socket colour: brown
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BKE
- Colour: brown
- Thread Size: M10x1
- Spanner Size: 24
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: OLISURVELLITUS
- Manufacturer: MAX
- Thread Size: M10x1
- Spanner Size: 22
- Colour Coding: brown
- Number of pins: 1
- Pressure from [bar]: 0.55
- Pressure to [bar]: 0.85
- Name: OLISURVELLITUS
- Manufacturer: MAX
-
Lisainfo: 21-
0359 -
Additional information: 21-
0359
- for OE number: 1100619
- Manufacturer: KAMOKA
- Corresponds to the original part in colour: brown
- Pressure from [bar]: 0.5
- Thread Size: M10X1
- Spanner Size: 24
- for OE number: 038919081K
- Manufacturer: MEAT & DORIA
- Quantity: 1
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; green; 4 pins
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
-
Name: NTY ECT-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: ECT-
AU- 005 - Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Sensor Type: NTC Sensor
- Socket colour: black
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pressure [bar]: 8.5
-
Housing Colour: dark-
brown - Thread Size: M10x1.0
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Quantity per packing unit: 3
- Number of connectors: 2
- Manufacturer: 3RG
- Engine Code: BKE
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Engine Code: BKE
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Engine Code: BKE
- Number of connectors: 4
- Manufacturer: 3RG
- Switch Pressure [bar]: 0.7
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET
- Thread Size: M 10x1
- Housing Colour: brown
- Pressure [bar]: 0.7
- Manufacturer: FAE
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001, 8E- 8- 000 001 - Number of pins: 4
- Colour: green
- Manufacturer: DELLO AUTOMEGA
- Fitted Diameter [mm]: 20
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Model Year from: 2005
- Model Year to: 2008
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 - Pressure from [bar]: 0.55
- Pressure to [bar]: 0.85
- Combi Switch Function: Normally Open Contact
- Colour: brown
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Housing Colour: black
- Number of pins: 4
- Spanner Size: 0
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: DLP
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Surve (bar): 0,
7 - Keermemõõt: M10 x 1
- Pistikkontaktide arv: 1
- tehnilise informatsiooni number: circuit N.O.
- Manufacturer: ERA
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 4
- Plug Type: Female
- Sensor Type: NTC Sensor
- Name: NI 207009
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Colour Coding: green
- Connector Shape: oval
- Sensor Type: NTC Sensor
- Number of pins: 4
-
for OE number: 059 919 501A,
1 124 770 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 4
- OE-numbri jaoks: 059919501A
- Piirangutega toode/piirangu info 2: koos osadega
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; black; 4 pins
- Manufacturer: VIKA
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9018
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: 20 mm
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.15
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.555
- Pressure to [bar]: 0.85
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: Olisurvellitus
- Manufacturer: HEL
-
Fabrication Number: ECP-
AU- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Control Range [bar]: 0.55/
0.85BAR - Colour: brown
-
General Information: Oil pressure sensor; 1 pin; brown; 0.55-
0.85 BAR - Manufacturer: BORSEHUNG
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 038 957 147 F
- Length [mm]: 530
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: ECP-
AU- 013 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BKE
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: BKE
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- for OE number: 078 919 501 C
- Manufacturer: TRUCKTEC
- Engine Code: BKE
- Colour: white
- Operating Mode: Mechanical
-
Name: LLITI,
SIDURDAMINE (GRA) - Manufacturer: EPS
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 93 2510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BKE
- Operating Mode: Mechanical
- Manufacturer: FACET
-
Engine Code: BKE,
BRB - Quantity: 2
- Operating Mode: Mechanical
- Number of pins: 2
- Combi Switch Function: Normally Open Contact
- Colour: blue
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: 20
- Number of pins: 4
- Manufacturer: ERA
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
black - Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 935
- Number of pins: 3
- Manufacturer: DLP
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW PASSAT B5 1,9TDI 98-
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; black
- Manufacturer: BORSEHUNG
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; green
- Manufacturer: BORSEHUNG
- Cable Length [mm]: 530
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Cable Length [mm]: 530
- Number of connectors: 3
- Housing Colour: black
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
- Cable Length [mm]: 450
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV509
- Cable Cross Section [mm²]: 0.75
- Manufacturer Restriction: VAG
- Socket Width [mm]: 2.8
- Number of pins: 3
- Cable Length [mm]: 250
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
-
Cable Length [mm]: 1,
000 - Number of connectors: 3
- Housing Colour: black
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
- Engine Code: BKE
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: with seal ring
-
Cable Length [mm]: 1,
000 - Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MAX
Manufacturer: MAGNETI MARELLI
-
Cable Length [mm]: 1,
000 - Number of pins: 3
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Housing Type: with housing
-
Fabrication Number: EPP-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 3
- Cable Length [mm]: 990
- Weight [kg]: 0.05
- Supplementary Article/Info 2: with cable
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: with cable
-
Length [mm]: 1,
000 - Height [mm]: 46
- Resistor [Ohm]: 540
- Number of connectors: 3
- Manufacturer: VERNET
- General Information: Camshaft position sensor
- Manufacturer: VIKA
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Weight [kg]: 0.12
- Name: VA 366446
- Manufacturer: VALEO
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Socket colour: grey
- Manufacturer: BRM
Name: CZUJNIK POO½ENIA WAU KORB. VW PASSAT B5 1,9TDI 98-
- Number of connectors: 3
- Cable Length [mm]: 950
- Weight [kg]: 0.088
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cable Length [mm]: 500
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 46
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.076
- Alternative Repair Kit: 550102
- Manufacturer: ERA
- Number of pins: 5
- Housing Type: with housing
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 069 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
Manufacturer: NRF
- Voltage [V]: 12
-
Fabrication Number: EPP-
AU- 031 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cable Length [mm]: 990
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAG
- Length [mm]: 530
- Number of connectors: 3
- Cable Length [mm]: 500
- Weight [kg]: 0.09
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Tootja piirang: VAG
- Pistikkontaktide arv: 4
- Kaablipikkus (mm): 200
-
Kaabli ristlõige [mm²]: 0,
75 - Kokkupuutepind: kullatud
-
Asetuslaius (mm): 1,
6 -
Piirangutega toode/piirangu info: Pistikuhülsi korpusega,
koos tihendiga - Piirangutega toode/piirangu info 2: koos ühendusega
- temperatuurivahemik alates [°C]: −25
- Temperatuurivahemik kuni [°C]: +140
- juhtmeisolatsiooni materjal: Silikoon
- SVHC: SVHS aineid ei esine
-
Name: Kaabli remondikomplekt,
rattaprete andur - Manufacturer: HBE
- Number of connectors: 3
- Cable Length [mm]: 950
- Weight [kg]: 0.088
- Name: SW 33 10 1999
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: BREMI
- Engine Code: BKE
-
Length [mm]: 1,
000 -
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Number of connectors: 3
- Number of mounting bores: 1
- Cable Length 1 [mm]: 925
- Fitting Depth [mm]: 46
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Inductive Sensor
- Connector Shape: D Shape
-
Colour: grey/
black - Name: SN CKP154.12
- Manufacturer: SNR
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with seal ring
- Cable Length [mm]: 981
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Engine Code: BKE
-
Length [mm]: 1,
000 - Manufacturer: FACET
- Length [mm]: 530
- Number of connectors: 3
- Cable Length [mm]: 500
- Weight [kg]: 0.09
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 7508
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Resistor Type: Hall Sensor
-
Length [mm]: 1,
010 - Supplementary Article/Info 2: with cable
- Manufacturer: VERNET
- Resistor [Ohm]: 500
-
Cable Length [mm]: 1,
000 - Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
vntvoll - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 5
- for OE number: 028906461
- Assy./disassy. by qualified personnel required!:
-
Name: AB 120-
08- 070 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Engine Code: BKE
- Number of pins: 3
- Manufacturer: FAE
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Connector Shape: rectangular
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 490
- Weight [kg]: 0.12
- Name: VA 366736
- Manufacturer: VALEO
- Number of pins: 4
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
-
Housing material: GRP
(Glass fibre Reinforced Plastic) -
Overall Length [mm]: 1,
025 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
-
Cable Length [mm]: 1,
000 - Sensor Type: Inductive Sensor
- for OE number: 038907319E
- Manufacturer: MEAT & DORIA
- Number of pins: 3
- Cable Length [mm]: 980
- Fitting Depth [mm]: 45.8
-
Name: ANDUR,
VNTVOLL - Manufacturer: TRI
- Number of pins: 5
- Plug Type: Male
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
-
Vehicle Identification Number (VIN) from: 8E-
2- 000 001 - Engine Code: BKE
- Housing Type: without housing
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: BOS
Name: CZUJNIK POO½ENIA WAU KORB. VW PASSAT B5/SKODA SUPERB I/AUDI A6 C5/A4 B7/A4 B6/A4 B5 1,9 TDI-2,0 TDI 97-09
- Number of connectors: 3
- Number of mounting bores: 1
- Rated Voltage [V]: 12
- Cable Length 1 [mm]: 935
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: D Shape
- Colour: black
- Name: SN CMP154.05
- Manufacturer: SNR
- Fuel Type: Diesel
- for OE number: 038906461C
- Number of pins: 5
- Voltage [V]: 12
- Manufacturer: DELLO AUTOMEGA
- Engine Code: BKE
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 935
- Sensor Type: Hall Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 1209109
- Manufacturer: KAMOKA
- Engine Code: BKE
-
Length [mm]: 1,
010 -
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Engine Code: BKE
-
Length [mm]: 1,
010 - Manufacturer: FACET
- Fuel Type: Diesel
- for OE number: 1209109
- Manufacturer: DELLO AUTOMEGA
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Manufacturer: VALEO
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
-
Engine Code: BKE,
BRB - Block Separation:
-
Vehicle Identification Number (VIN) from: 8E-
2- 000001 - Voltage [V]: 12
- Name: Ohumassimootja
- Manufacturer: MAX
- Laius (mm): 92
- Kõrgus (mm): 90
- Pikkus (mm): 49
- Garantii: 3 aastat garantii
- OE-numbri jaoks: 038 906 433 A
- Pinge [V]: 12
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: BKE
- Housing Type: with housing
- Number of pins: 5
- Manufacturer: JP GROUP
- Lisainfo: Air meter
- Additional information: Air meter
- Engine Code: BKE
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.32
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV083
- Engine Code: BKE
- Housing Type: with housing
- Number of pins: 5
- Manufacturer: VDO
- Housing Type: without housing
- Number of pins: 5
- Connector Shape: D Shape
-
Sensor Type: Hot-
wire Sensor - Voltage [V]: 14
- Length [mm]: 60
- Width [mm]: 43
- Height [mm]: 103
- Name: VA 366942
- Manufacturer: VALEO
- Housing Type: with housing
- Number of pins: 5
- Housing material: Plastic
- Connector Shape: D Shape
- Number of mounting bores: 2
- Supplementary Article/Info 2: with integrated grille
- Recommended additional repairs: Air Filter
- New Part:
- Used part return not required:
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 5
- for OE number: 028906461X
- Manufacturer: MEAT&DORIA
- Quality: OE EQUIVALENT
- for OE number: 1428448
- Manufacturer: MEAT&DORIA
- Pinge [V]: 12
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Kaal (kg): 0,
07 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV501
- Recommended additional repairs: Air Filter
- General Information: Air mass meter
- Manufacturer: VIKA
- Number of pins: 5
- for OE number: 1209109
- Manufacturer: MEAT&DORIA
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
-
Name: DE AF10316-
12B1 - Manufacturer: DELPHI
- Engine Code: BRB
- Model Year from: 2006
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Fitting Position: before catalytic converter
- Cable Length [mm]: 830
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Quality: OE EQUIVALENT
- for OE number: A05033320AA
- Manufacturer: MEAT & DORIA
- Mounting Type: Bolted
- Number of pins: 5
- Assy./disassy. by qualified personnel required!:
- Name: Ohumassimootja
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Supplementary Article/Supplementary Info: without suction pipe
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: OHUMASSIMOOTJA
- Manufacturer: HUC
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
- Korpusetüüp: ilma korpuseta
- Piirangutega toode/piirangu info 2: ilma integreeritud õhutemperatuuri sensorita
- Name: OHUMASSIMOOTJA
- Manufacturer: NTK
- Number of pins: 3
- for OE number: 038906433A
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- Operating Mode: Electric
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.22
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV420
- Guarantee: 5 years guarantee
- Number of pins: 3
- Sensor Type: Hall Sensor
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
-
Vehicle Identification Number (VIN) from: 8E-
2- 000 001 -
Engine Code: BKE,
BRB - Block Separation:
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: DLP
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor, Heated - Fitting Position: before catalytic converter
- Engine Code: BRB
-
Cable Length [mm]: 1,
192 -
Name: DE ES21110-
12B1 - Manufacturer: DELPHI
- Supplementary Article/Supplementary Info: without suction pipe
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HUCO
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor, Heated - Fitting Position: before catalytic converter
- Engine Code: BRB
-
Cable Length [mm]: 1,
216 -
Name: DE ES21378-
12B1 - Manufacturer: DELPHI
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: BRB
-
Vehicle Equipment: for vehicles with diesel particulate filter
(DPF) -
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Oxygen Sensor: Broadband Oxygen Sensor,
Heated - Conductor Number: 6
-
Cable Length [mm]: 1,
720 - Thread Size: M18x1.5
- Number of pins: 6
- Fitting Position: before catalytic converter
-
Name: SONDA LAMBDA VW TRANSPORTER T5,
GOLF VI 1, 9- 6, 0- - Manufacturer: PIE
-
Cable Length [mm]: 1,
030 - Sensor Type: Hall Sensor
- Number of pins: 3
- Manufacturer: METZGER
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Engine Code: BRB
- Construction Year from: 01.2006
-
Length [mm]: 1,
200 - Number of pins: 6
- for article number: 77030
- Manufacturer: FAE
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BRB
- Fitting Position: before catalytic converter
- Colour: black
-
Cable Length [mm]: 1,
200 - Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Name: EP 1.998.425
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
- Engine Code: BRB
- Fitting Position: before catalytic converter
- Colour: black
-
Cable Length [mm]: 1,
200 - Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- soovitatav remondimahtu suurendamine: Õhufilter
- Name: Ohumassimootja
- Manufacturer: BOS
- Construction Year from: 11.2005
- Engine Code: BRB
- Number of pins: 6
-
Cable Length [mm]: 1,
200 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Weight [kg]: 0.22
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated
- Supplementary Article/Supplementary Info: without pipe
- Supplementary Article/Info 2: Can only be fitted with original mounting
- for OE number: 074906461BX
- Manufacturer: MEAT&DORIA
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor - Fitting Position: before catalytic converter
- Engine Code: BRB
-
Cable Length [mm]: 1,
200 - Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: BRB
- Construction Year from: 01.2006
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
-
Overall Length [mm]: 1,
215 -
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Number of pins: 5
- Connector Shape: D Shape
-
Sensor Type: Hot-
film Sensor - Voltage [V]: 12
- Length [mm]: 182
- Width [mm]: 165
- Height [mm]: 125
- Weight [kg]: 0.38
- Manufacturer: VALEO
- Number of mounting bores: 3
- Number of pins: 6
- Transmission Type: Manual Transmission
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - for PR number: 0L2
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of mounting bores: 3
- Number of pins: 6
- Transmission Type: Manual Transmission
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks