Lisainfo: QB11667K

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M6x1
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

• Fitting Position: Front Axle
• Installatsiooni pool: esisild paremal, esisild vasakul
• Pidurisüsteem: ATE
• Pikkus (mm): 140
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• for combined PR number: 1LB,1LE
• Kaal (kg): 0,015
• pakendi pikkus [cm]: 10
• pakendi laius [cm]: 10
• pakendi kõrgus [cm]: 2
• Manufacturer: FEBEST

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• tootekoodile: V10-8182
• Hoiatuskontakti pikkus (mm): 250
• Piduriliik: Ketaspidur
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1123
• Lisainfo: QB109-1123

• Fitting Position: Front Axle
• for brake disc thickness [mm]: 25
• for brake disc diameter [mm]: 288, 312
• for PR number: 1LB, 1LF, 1LT
• Pidurisüsteem: ATE
• Kaal (kg): 0,02
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Quantity per packing unit: 2
• Name: DE LX0210
• Manufacturer: DELPHI
• Lisainfo: LX0210
• Additional information: LX0210

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Installatsiooni pool: Esisild, Tagasild
• Pidurisüsteem: ATE
• Kaal (kg): 0,024
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Pidurisüsteem: ATE
• OE-numbri jaoks: 1667526
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Manufacturer Restriction: ATE
• Netokaal [kg]: 0,03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• for PR number: 1KW
• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• Kaal (kg): 0,039
• Manufacturer: TOMEX C

• Fitting Position: Rear Axle
• Tootja piirang: TRW
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: TRW

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• PR-numbri jaoks: 1KW, 2EH
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Pidurisüsteem: Lucas
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2465A

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• for brake disc diameter [mm]: 320
• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901639

• for PR number: 1LA, 1LC
• Installatsiooni pool: Esisild
• Pidurisüsteem: Teves
• Kaal (kg): 0,123
• Manufacturer: TOMEX C

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-003
• Manufacturer: NTY

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 288
• Brake System: ATE
• Manufacturer: BOSCH

• Installatsiooni pool: esisild paremal
• Seerianumber: HTO-AU-011
• Välisläbimõõt [mm]: 320
• pidurikettaläbimõõdule (mm): 280
• paaris tootenumbrid: HTO-AU-010
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Seerianumber: HTO-AU-010
• Välisläbimõõt [mm]: 320
• pidurikettaläbimõõdule (mm): 280
• paaris tootenumbrid: HTO-AU-011
• Manufacturer: NTY

• Vehicle Identification Number (VIN) from: 8E-5-400001
• for PR number: 1KW
• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288, 312
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• for brake disc thickness [mm]: 30
• for brake disc diameter [mm]: 320, 345
• for PR number: 1LA, 1LC, 1LJ
• Pidurisüsteem: ATE
• Kaal (kg): 0,12
• Manufacturer: ABS

• Installatsiooni pool: esisild paremal
• Välisläbimõõt [mm]: 320
• paaris tootenumbrid: 131-07-191
• soovitava lisavarustuse artiklinumber: 231-03-014
• pidurikettaläbimõõdule (mm): 280
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild paremal
• OE-numbri jaoks: 8E0615312A
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 280
• Läbimõõt 1 (mm): 320
• Manufacturer: KAMOKA

• Installatsiooni pool: esisild vasakul
• OE-numbri jaoks: 8E0615311A
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 280
• Läbimõõt 1 (mm): 320
• Manufacturer: KAMOKA

• Installatsiooni pool: esisild vasakul
• Välisläbimõõt [mm]: 320
• paaris tootenumbrid: 131-07-192
• soovitava lisavarustuse artiklinumber: 231-03-014
• pidurikettaläbimõõdule (mm): 280
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left, Front Axle
• Läbimõõt 1/Läbimõõt 2 (mm): 320
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 280
• Installatsiooni pool: esisild vasakul
• Name: CFD 610214
• Manufacturer: DACO

• Fitting Position: Right, Front Axle
• Läbimõõt 1/Läbimõõt 2 (mm): 320
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 280
• Installatsiooni pool: esisild paremal
• Name: CFD 610215
• Manufacturer: DACO

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Manufacturer Restriction: TEVES, ATE, GIRLING
• for brake disc thickness [mm]: 30, 25, 22
• for brake disc diameter [mm]: 320, 288, 312, 280
• for PR number: 1LA, 1LC, 1LB, 1LE, 1LF, 1LT, 1LZ
• Block Separation:
• Installatsiooni pool: paremal
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV254
• Kaal (kg): 0,35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Manufacturer Restriction: TEVES, ATE, GIRLING
• for brake disc thickness [mm]: 30, 25, 22
• for brake disc diameter [mm]: 320, 288, 312, 280
• for PR number: 1LA, 1LC, 1LB, 1LE, 1LF, 1LT, 1LZ
• Block Separation:
• Installatsiooni pool: vasakul
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV255
• Kaal (kg): 0,35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Installatsiooni pool: esisild vasakul
• Tootja piirang: ATE, Girling, Teves
• pidurikettaläbimõõdule (mm): 280
• Manufacturer: YSPARTS

• Installatsiooni pool: esisild vasakul
• Materjal: Raudplekk
• paaris tootenumbrid: V10-5058
• Pealispind: värvimisviis, tsingitud
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul
• paaris tootenumbrid: 131-07-194
• pidurikettaläbimõõdule (mm): 345
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Installatsiooni pool: esisild paremal
• paaris tootenumbrid: 131-07-193
• pidurikettaläbimõõdule (mm): 345
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild paremal
• Seerianumber: HTO-AU-013
• Välisläbimõõt [mm]: 325
• pidurikettaläbimõõdule (mm): 255
• paaris tootenumbrid: HTO-AU-012
• Manufacturer: NTY

• Installatsiooni pool: Tagasild vasakul
• Seerianumber: HTO-AU-012
• Välisläbimõõt [mm]: 325
• pidurikettaläbimõõdule (mm): 255
• paaris tootenumbrid: HTO-AU-013
• Manufacturer: NTY

• paaris tootenumbrid: 174902
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,396
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild paremal
• OE-numbri jaoks: 8E0615612J
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 255
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild vasakul
• OE-numbri jaoks: 8E0615611J
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 255
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Läbimõõt 1 (mm): 320
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 280
• paaris tootenumbrid: 11054
• Kaal (kg): 0,32
• Manufacturer: ABS

• Installatsiooni pool: Tagasild vasakul
• Välisläbimõõt [mm]: 325
• Siseläbimõõt [mm]: 80
• paaris tootenumbrid: 131-07-700
• soovitava lisavarustuse artiklinumber: 231-04-111
• pidurikettaläbimõõdule (mm): 255
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild paremal
• Välisläbimõõt [mm]: 325
• Siseläbimõõt [mm]: 80
• paaris tootenumbrid: 131-07-699
• soovitava lisavarustuse artiklinumber: 231-04-111
• pidurikettaläbimõõdule (mm): 255
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Quantity per packing unit: 2
• Name: DE LX0395
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild paremal
• Pealispind: tsingitud, värvimisviis
• Materjal: Raudplekk
• paaris tootenumbrid: V10-5057
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul
• OE-numbri jaoks: 8E0615311C
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 345
• Manufacturer: KAMOKA

• Installatsiooni pool: esisild paremal
• OE-numbri jaoks: 8E0615312C
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 345
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild paremal
• pidurikettaläbimõõdule (mm): 302
• Seerianumber: HTO-AU-001
• paaris tootenumbrid: HTO-AU-000
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 345
• Seerianumber: HTO-AU-006
• paaris tootenumbrid: HTO-AU-007
• Manufacturer: NTY

• Installatsiooni pool: esisild paremal
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 345
• Seerianumber: HTO-AU-007
• paaris tootenumbrid: HTO-AU-006
• Manufacturer: NTY

• paaris tootenumbrid: 174903
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,396
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Right
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 255
• Installatsiooni pool: Tagasild paremal
• Name: CFD 610217
• Manufacturer: DACO

• Fitting Position: Rear Axle, Left
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 255
• Installatsiooni pool: Tagasild vasakul
• Name: CFD 610216
• Manufacturer: DACO

• OE-numbri jaoks: 8E0927803B
• Kaablipikkus (mm): 990
• Anduritüüp: passiivne andur
• Installatsiooni pool: Esisild
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• paaris tootenumbrid: 234773
• pidurikettaläbimõõdule (mm): 280
• Läbimõõt 1/Läbimõõt 2 (mm): 320
• Installatsiooni pool: esisild vasakul
• Netokaal [kg]: 0,32
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• paaris tootenumbrid: 234772
• pidurikettaläbimõõdule (mm): 280
• Läbimõõt 1/Läbimõõt 2 (mm): 320
• Installatsiooni pool: esisild paremal
• Netokaal [kg]: 0,29
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Manufacturer: BOSCH

• Installatsiooni pool: Esisild
• Pikkus (mm): 975
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Anduritüüp: Hallsensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Construction Year to: 03.2008
• Vehicle Identification Number (VIN) from: 8E-5-400001
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Kaablipikkus (mm): 1 190
• Anduritüüp: passiivne andur
• Installatsiooni pool: Tagasild vasakul
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild vasakul
• Pealispind: värvimisviis, tsingitud
• Materjal: Raudplekk
• paaris tootenumbrid: V10-5062
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paaris tootenumbrid: 175139
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 0,455
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Installatsiooni pool: Tagasild vasakul
• pidurikettaläbimõõdule (mm): 302
• Seerianumber: HTO-AU-000
• paaris tootenumbrid: HTO-AU-001
• Manufacturer: NTY

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 1 005
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• paaris tootenumbrid: 175138
• Installatsiooni pool: Tagasild paremal
• Kaal (kg): 0,455
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Quantity: 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 6
• Kaablipikkus (mm): 1 190
• Name: CZUJNIK ABS AUDI A4, RS4, S4/ SEAT EXEO, EXEO ST
• Manufacturer: DLP

• for PR number: 1LJ
• Installatsiooni pool: esisild paremal
• pidurikettaläbimõõdule (mm): 345
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV206
• Kaal (kg): 0,5
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV207

• for PR number: 1LJ
• Installatsiooni pool: esisild vasakul
• pidurikettaläbimõõdule (mm): 345
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV207
• Kaal (kg): 0,37
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV206