• Installatsiooni pool: Heitgaaside turbokompressor
• Manufacturer: ELRING

• Seerianumber: GPP-AU-043
• Manufacturer: NTY
• Name: NTY GPP-AU-043

• Installatsiooni pool: ees
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Kaal (kg): 0,11
• vajaminev tükihulk: 1
• Üldine informatsioon: Gasket for oil separator
• Manufacturer: VIKA

• Engine Code: BGB, BWE
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV761

• OE-numbri jaoks: 6F 103 221 E
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BGB, BWE
• Manufacturer: JP GROUP
• Lisainfo: Hose, crankcase breather
• Additional information: Hose, crankcase breather

• Engine Code: BWE, BGB
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Engine Code: BWT
• Manufacturer: JP GROUP
• Lisainfo: Hose, crankcase breather
• Additional information: Hose, crankcase breather

• Seerianumber: GPP-VW-037
• Piirangutega toode/piirangu info 2: kiirliidesega
• Manufacturer: NTY

• Üldine informatsioon: PCV pipe
• Manufacturer: VIKA

• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: ees
• Kaal (kg): 0,11
• Name: TIHEND, KARTERITUULUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 06F103221E
• Kaal (g): 37
• Siseläbimõõt 1 [mm]: 12
• Siseläbimõõt 2 (mm): 12
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

Üldine informatsioon: The installation of this product can be performed only in a workshop environment by trained professionals

• Engine Code: BWE, BGB
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Seerianumber: EPCV-AU-001
• Manufacturer: NTY

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Kaal (kg): 0,149
• OE-numbri jaoks: 06F 129 101 R
• Hooldusinfot jälgida:
• Manufacturer: ENERGY

• OE-numbri jaoks: 6F103235
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kaal (g): 43
• Siseläbimõõt 1 [mm]: 15
• Siseläbimõõt 2 (mm): 15
• Name: IM 223731
• Manufacturer: ORIGINAL IMPERIUM

Üldine informatsioon: The installation of this product can be performed only in a workshop environment by trained professionals

• Manufacturer: JP GROUP A/S
• Lisainfo: Breather valve for cylinder block
• Additional information: Breather valve for cylinder block

• Engine Code: BPG, BWT
• Laius (mm): 170
• Kõrgus (mm): 110
• vooliku pikkus [mm]: 300
• Piirangutega toode/piirangu info 2: kiirliidesega
• Siseläbimõõt 1 [mm]: 16
• Siseläbimõõt 2 (mm): 16,3
• Kaal (kg): 0,059
• OE-numbri jaoks: 06F 103 235 A
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BGB, BWE
• Garantii: 3 aastat garantii
• Kaal (kg): 0,07
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV037

• Engine Code: BPG, BWT
• Installatsiooni pool: Vändaraam
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info: koos tihendiga
• Rakendustüüp: juhitav survega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: AB 053-028-051
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Üldine informatsioon: PCV pipe
• Manufacturer: VIKA

• Engine Code: BGB, BWE
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BWE, BGB
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BPG, BWT
• Construction Year from: 12.2005
• for PR number: 7GB
• Name: klapp, karterituulutus
• Manufacturer: MAX

• Engine Code: BWE, BGB
• Materjal: Plastik
• Name: klapp, karterituulutus
• Manufacturer: MAX

• Installatsiooni pool: Silindripea
• Rakendustüüp: juhitav survega
• Garantii: 3 aastat garantii
• Uus osa:
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Kaal (kg): 0,19
• Name: CE 31SKV004
• Manufacturer: ESEN SKV

• Engine Code: BWE
• Kaal (kg): 0,07
• Manufacturer: METALCAUCHO

• Üldine informatsioon: PCV pipe
• Manufacturer: VIKA

• Installatsiooni pool: Silindripea
• Materjal: Plastik
• Klapitüüp: Õhutusklapp
• lisaks vajaminevaid tooteid vaata Lisadenimekirjast:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Kõrgus (mm): 47
• Heitgaaside normatiiv: Euro 4
• Installatsiooni pool: Silindripea
• Klapitüüp: Drosselventiil, Õhutusklapp, Membraanklapp
• Pikkus (mm): 189
• Tehnilisi andmeid jälgida:
• Laius (mm): 86
• Hooldusinfot jälgida:
• Rakendustüüp: juhitav survega
• Piirangutega toode/piirangu info: ilma tihendita
• Jälgige sõidukitootja juhiseid:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: MAX

• Engine Code: BPG, BWT
• Piirangutega toode/piirangu info 2: kiirliidesega
• Kaal (kg): 0,034
• OE-numbri jaoks: 06F 103 221 H
• Hooldusinfot jälgida:
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 188
• Kõrgus (mm): 42
• Klapitüüp: Õhutusklapp, Membraanklapp
• soovitava lisavarustuse artiklinumber: V10-3247
• Rakendustüüp: juhitav survega
• Soovituslik vahetusintervall (aastad): 3
• Laius (mm): 84
• Piirangutega toode/piirangu info: ilma tihendita
• Hooldusinfot jälgida:
• Korpuse materjal: Polyamid 6.6
• Installatsiooni pool: Silindripea
• Soovituslik vahetusintervall (km): 60 000
• Tehnilisi andmeid jälgida:
• Jälgige sõidukitootja juhiseid:
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Piirangutega toode/piirangu info: ventiiliga
• Üldine informatsioon: PCV valve
• Manufacturer: VIKA

• soovitava lisavarustuse artiklinumber: DRM079
• Manufacturer: DR MOTOR

• Heitgaaside normatiiv: Euro 4 (D4)
• OE-numbri jaoks: 06F129101R
• Manufacturer: MEAT&DORIA

Manufacturer: ERA

Manufacturer: ERA

Manufacturer: ERA

Manufacturer: ERA

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Kaal (kg): 0,149
• OE-numbri jaoks: 06F 129 101 R
• Hooldusinfot jälgida:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: õlieralaldaja jaoks
• Manufacturer: HENGST FILTER

• Materjal: Plastik
• Värv: must
• Name: Olieraldaja, karterituulutus
• Manufacturer: GAT

• Engine Code: BPG, BWT
• Construction Year from: 12.2005
• for PR number: 7GB
• Värv: must
• Kaal (kg): 0,152
• OE-numbri jaoks: 06F 129 101 P S1
• Piirangutega toode/piirangu info: koos tihendiga
• Hooldusinfot jälgida:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BWE,BGB
• Filtritüüp: õlieralaldaja jaoks
• Manufacturer: HENGST FILTER

• Engine Code: BPG, BWT
• Construction Year from: 12.2005
• for PR number: 7GB
• Soovituslik vahetusintervall (km): 60 000
• Korpuse materjal: Polyamid 6.6
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Installatsiooni pool: Silindripea
• Klapitüüp: Membraanklapp, Õhutusklapp
• Soovituslik vahetusintervall (aastad): 3
• Rakendustüüp: juhitav survega
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BWE, BGB
• Värv: must
• Kaal (kg): 0,161
• OE-numbri jaoks: 06F 129 101 R S1
• Piirangutega toode/piirangu info: koos tihendiga
• Hooldusinfot jälgida:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hulgaühik: Komplekt
• Osade arv [-osaline]: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Kõrgus (mm): 47
• Heitgaaside normatiiv: Euro 4 (D4)
• Soovituslik vahetusintervall (km): 60 000
• soovitava lisavarustuse artiklinumber: V10-3246
• Installatsiooni pool: Silindripea
• Klapitüüp: Drosselventiil, Õhutusklapp, Membraanklapp
• Pikkus (mm): 189
• Tehnilisi andmeid jälgida:
• Laius (mm): 86
• Soovituslik vahetusintervall (aastad): 3
• Hooldusinfot jälgida:
• Rakendustüüp: juhitav survega
• Piirangutega toode/piirangu info: ilma tihendita
• Jälgige sõidukitootja juhiseid:
• Korpuse materjal: Polyamid 6.6
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BPG, BWT
• Production date from: 16.12.2005
• OE-numbri jaoks: 06F 129 101E/G/P
• Manufacturer: METZGER

Manufacturer: OYODO

• Engine Code: BWE, BGB
• Installatsiooni pool: Silindripea
• Klapitüüp: Membraanklapp, Õhutusklapp
• Korpuse materjal: Polyamid 6.6
• Soovituslik vahetusintervall (km): 60 000
• Soovituslik vahetusintervall (aastad): 3
• Hooldusinfot jälgida:
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Rakendustüüp: juhitav survega
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Silindripea
• Kaal (kg): 0,4
• Rakendustüüp: juhitav survega
• Hulgaühik: Komplekt
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV005

• Installatsiooni pool: Plokikaas, küljepoolne sisseehitus
• Klapitüüp: Membraanklapp
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info: koos tihendiga, koos toruühendusega
• Osade arv [-osaline]: 4
• Üksikosad vaata osanimekirja:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Värv: must
• Materjal: Plastik
• Kaal (kg): 0,33
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Hooldusinfot jälgida:
• Name: klapp, karterituulutus
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BPG, BWT
• Värv: must
• Materjal: Plastik
• Piirangutega toode/piirangu info 2: koos kruvidega
• Kaal (kg): 0,33
• Hooldusinfot jälgida:
• Name: klapp, karterituulutus
• Manufacturer: FEB

Piirangutega toode/piirangu info: koos tihendiga, koos paigaldus-/kinnitusmaterjaliga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 5
• Täiskomplekt:
• Manufacturer: ERA

• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BWE, BGB, BPG
• Block Separation:
• Construction Year to: 12.2005
• Rakendustüüp: juhitav survega
• Piirangutega toode/piirangu info: koos tihendiga, koos voolikuga
• Kruvide-/Mutrite teostus: Plekikruvi
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Installatsiooni pool: Silindripea
• Klapitüüp: Membraanklapp, Õhutusklapp
• Piirangutega toode/piirangu info 2: koos kruvidega
• Soovituslik vahetusintervall (aastad): 3
• Kruvipea-/Mutriprofiil: sise-Torx
• lisaks vajaminevaid tooteid vaata Lisadenimekirjast:
• Täiskomplekt:
• Soovituslik vahetusintervall (km): 60 000
• Hooldusinfot jälgida:
• Korpuse materjal: Polyamid 6.6
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: ERA