• Transmission Type: 4-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with oil sump gasket
• Width [mm]: 157
• Height [mm]: 32
• Seal Diameter [mm]: 34
• Transmission Code: AG4, JF404E
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Width [mm]: 195
• Height [mm]: 142
• Seal Diameter [mm]: 25
• Manufacturer: DELLO AUTOMEGA

• Transmission ID: 6HP19
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 5-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 161
• Height [mm]: 57
• Transmission Code: 5HP
• Manufacturer: KAMOKA FILTRY

• Transmission Code: ZF5HP19FL
• Filter type: Suction Filter
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 274
• Width [mm]: 161
• Height [mm]: 26
• Inner Diameter [mm]: 24
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-002
• Name: NTY FSF-AU-002
• Manufacturer: NTY

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 01J
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Code: 01J 301 383 T, 01J, 01J 301 383 S
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.499
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Width [mm]: 195
• Height [mm]: 142
• Transmission Type: Automatic Transmission
• Gasket Design: Soft Material Gasket
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: 01J, 01J 301 383 T, 01J 301 383 S
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Quantity Unit: Piece
• Transmission Code: 6HP19, 6HP26
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Engine Code: BHF
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Filter type: Screen Filter
• Length [mm]: 231.5
• Width [mm]: 195.5
• Height [mm]: 122
• Material: Plastic
• Weight [kg]: 0.381
• Observe service information:
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 6HP19
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Engine Code: BHF
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Filter type: Screen Filter
• Length [mm]: 231.5
• Width [mm]: 195.5
• Height [mm]: 122
• Material: Plastic
• Manufacturer: SWAG
• Name: SW 30 94 8368

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 6HP19
• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 195
• Height [mm]: 144
• Seal Diameter [mm]: 25
• Transmission Code: 6HP19
• Manufacturer: KAMOKA FILTRY

• Transmission Code: 6HP19
• Manufacturer: HENGST FILTER

Transmission Type: 6-Speed Automatic Transmission, Manual-/optional automatic transmission

• Filter type: Screen Filter
• Transmission Code: 01J, 01J 301 383 S, 01J 301 383 T
• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: 01J, 01J 301 383 T, 01J 301 383 S
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.532
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: ZF5HP19FL
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 274
• Width [mm]: 161
• Height [mm]: 26
• Inner Diameter [mm]: 24
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Engine Code: BHF
• Transmission Type: 6-Speed Automatic Transmission
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Length [mm]: 231
• Weight [kg]: 0.5
• Manufacturer: DRIVE

• Engine Code: BHF
• Transmission Type: 6-Speed Automatic Transmission
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BHF
• Transmission Type: 6-Speed Automatic Transmission
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 30 10 0266
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Transmission Type: 6-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Transmission Code: 6HP19
• Weight [kg]: 0.505
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BHF
• Transmission Type: 6-Speed Automatic Transmission
• Transmission ID: HYK/JNX/JJE, JAX/HYJ/HYH, JTR/HYL
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: AG4
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 196
• Width [mm]: 158
• Height [mm]: 34
• Inner Diameter [mm]: 25
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER

• Filter type: Filter Insert
• Length [mm]: 231.5
• Width [mm]: 195
• Height [mm]: 142
• Inner Diameter 2 [mm]: 25
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Number of Holes: 23
• Recommended change interval [km]: 80,000
• Packaging width [cm]: 12.8
• Packaging length [cm]: 21
• Packaging height [cm]: 31.9
• Net Weight [g]: 389
• Manufacturer: KNECHT
• Name: KN HX164D

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission

• Transmission ID: GUR, HHU, 6HP19
• Transmission Code: HLB, HKF, 6HP19
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Weight [kg]: 0.576
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Length [mm]: 231.5
• Width [mm]: 195
• Height [mm]: 142
• Inner Diameter 2 [mm]: 25
• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Metal Elastomer Gasket
• Number of Holes: 13
• Recommended change interval [km]: 80,000
• Packaging width [cm]: 12.8
• Packaging length [cm]: 21
• Packaging height [cm]: 31.9
• Net Weight [g]: 380
• Name: KN HX164D1
• Manufacturer: KNECHT

• Transmission ID: GUR, HHU, HLB, HKF, 6HP19
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: ZF
• Quantity Unit: Set
• Transmission Code: 6HP19 A
• Supplementary Article/Info 2: with bolts/screws
• Number of mounting bores: 24
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• Material: Rubber/Metal
• Alternative Repair Kit: 8020009
• Manufacturer: METZGER

• Transmission ID: JTR, HYL, 6HP19
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Weight [kg]: 0.568
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: JTR, HYL, 6HP19
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: ZF
• Quantity Unit: Set
• Transmission Code: 6HP19 A
• Number of mounting bores: 24
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.