Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) to: 4E-
8- 014 200 -
Fitting Position: Upper,
Rear, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
- not for PR number: F4S
-
Fitting Position: Front Axle Left,
Front Axle Right, outer, Lower -
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, outer -
Additional information: Rubber mount for wishbone,
front, outer
- not for PR number: F4S
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
Lisainfo: Rubber mount for wishbone, front
-
Mounting Type: Rubber-
Metal Mount -
Material: Rubber/
Metal - Thickness [mm]: 45
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Manufacturer: MERTZ
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
- Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
-
Fitting Position: inner,
Upper, Front Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.118
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Lower, Centre -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 43
- Height [mm]: 45
- Manufacturer: DELLO AUTOMEGA
-
for PR number: 1BK,
2MA -
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.07
-
Name: DY 37-
06034- 5 - Manufacturer: DYS
-
Fitting Position: Upper,
Front Axle - Manufacturer: GSP
-
Fitting Position: Front Axle,
inner, Upper, Front, Rear - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Right,
Left, Front Axle - Required quantity: 4
- Manufacturer: CORTECO
- Name: COC 80004742
-
Vehicle Identification Number (VIN) to: 4E-
4- 012 700 - Block Separation:
-
Vehicle Identification Number (VIN) from: 4E-
4- 012 701 - not for PR number: 2MB
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- for OE number: 4E0407181B
- paired article number: 2256054
- Manufacturer: SASIC
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Vehicle Identification Number (VIN) to: 4E-
4- 012 700 - Block Separation:
-
Vehicle Identification Number (VIN) from: 4E-
4- 012 701 - not for PR number: 2MB
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Name: SW 32 93 0696
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Lower Front Axle,
outer - Required quantity: 2
- Manufacturer: TEDGUM
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) to: 4E-
8- 014200 -
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MAX
-
Fitting Position: Front Axle both sides,
Upper - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 33
- Name: ALT 80928AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Height 1 [mm]: 26
- Height 2 [mm]: 39.8
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.4
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 80
- Manufacturer: METALCAUCHO
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 44
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 45
- Manufacturer: BGA
-
Fitting Position: Front Axle both sides,
Upper, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.4
- Inner Diameter [mm]: 10
- Length [mm]: 40
- Weight [kg]: 0.088
- Manufacturer: RTS
-
Fitting Position: Right,
Left, outer, Front Axle - Total Length [mm]: 45
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 44
- Name: COC 80004748
- Manufacturer: CORTECO
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: outer,
both sides, Front, Lower Front Axle - Axle alignment required after fitting:
- Weight [kg]: 0.085
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.16
-
Name: DY 37-
06164- 5 - Manufacturer: DYS
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle both sides,
Lower, outer, Front - Outer Diameter [mm]: 44
- Inner Diameter [mm]: 12.3
- Length [mm]: 45
- Weight [kg]: 0.104
- Manufacturer: RTS
-
Fitting Position: outer,
Lower, Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331028
- Length [mm]: 45
- Height [mm]: 43.8
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 43.8
- Name: SK VKDS331028
- Manufacturer: SKF
-
Vehicle Identification Number (VIN) to: 4E-
8- 014 200 -
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
outer, Lower, Front - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 44
- Thickness 1 [mm]: 45
- Manufacturer: DELPHI
- Name: DE TD723W
-
Fitting Position: Front Axle both sides,
Lower, Front, outer - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 44
- Height [mm]: 45
- Name: ALT 84050AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- with environmental seal: Carbon neutral
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle both sides,
Upper, Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 38
- Inner Diameter [mm]: 12.2
- Length [mm]: 76.8
- Weight [kg]: 0.132
- Manufacturer: RTS
-
Fitting Position: Right,
Left, inner, Front Axle - Total Length [mm]: 60
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 55
- Name: COC 80004746
- Manufacturer: CORTECO
- Thickness [mm]: 45
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.06
- Observe service information:
-
Name: Puks -
Kndmik VW P. A6 04- / A8 02- DOLNA LE/ PR - Manufacturer: FEB
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Fitting Position: both sides,
inner, Front, Lower Front Axle - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
- Weight [kg]: 0.373
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: BGA
- Thickness [mm]: 45
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: SWAG
- Name: SW 30 92 7484
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Quality class: PJ
- Name: Control arm bush left=right
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 43.8
- Width [mm]: 45
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: inner,
Lower Front Axle - Manufacturer: GSP
-
Fitting Position: Front Axle,
Lower, Rear -
Fabrication Number: ZTP-
AU- 035
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Lower,
Rear, Front Axle Left, Front Axle Right - for OE number: 4D0 407 183 AC
-
Material: Rubber/
Metal - Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Diameter 4 [mm]: 75
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Lower Front Axle,
Rear, both sides, inner - Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG 00729773
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- with environmental seal: Carbon neutral
-
Name: Puks -
Kndmik VW P. A4 04- - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Diameter 4 [mm]: 75
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"
- not for PR number: F4S
- Height [mm]: 45
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- with environmental seal: Carbon neutral
-
Name: Puks -
Kndmik VW P. A6 04- / A8 02- DOLNA LE/ PR - Manufacturer: MEY
-
Lisainfo: 1006100003/
HD -
Additional information: 1006100003/
HD
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, outer General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: Front Axle,
inner, Lower, Front - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 55
- Thickness 1 [mm]: 60
- Manufacturer: DELPHI
- Name: DE TD1240W
- Special Purpose Vehicle: not for armoured vehicles
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 55,
28 -
Material: Rubber/
Metal - Weight [kg]: 0.199
- Manufacturer: FEBI BILSTEIN
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, both sides, Front, inner - Manufacturer: TRW
for OE number: 4F0407151, 4F0407151A, 4E0407151K, 4E0407151J, 4E0407151E, 4E0407151L, 4E0407151G SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
both sides, Lower, Front, outer - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
-
Article number of recommended accessories: 39097 01,
39364 01, 44252 01 - Observe service information:
-
Name: Puks -
Kndmik VW P. A6 04- / A8 02- DOLNA LE/ PR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Name: COC 49398219
- Manufacturer: CORTECO
- Model Year from: 2008
- Fitting Position: Rear Axle Lower
- Weight [kg]: 0.11
- Packaging length [cm]: 5.1
- Packaging width [cm]: 5.1
- Packaging height [cm]: 2.9
- Manufacturer: FEBEST
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 64
- Length [mm]: 80
- paired article number: 270437
- Weight [kg]: 0.51
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Thickness [mm]: 80
- Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 12
- Manufacturer: BGA
- Diameter 4 [mm]: 75
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- not for PR number: F4S
- Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 55
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- with environmental seal: Carbon neutral
-
Name: Puks -
Kndmik VW P. A6/ A8 DOLNEG - Manufacturer: MEY
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, inner General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Construction Year from: 09.2007
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 483
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Front Axle,
Lower, both sides, Front, inner - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Article number of recommended accessories: 39097 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A6/ A8 DOLNEG - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
both sides, Front, Lower, outer -
Name: Puks -
Kndmik VW T. A8 02- 10 DOLNEGO - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear,
inner, Lower, Front Axle -
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 455
- new version:
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Length [mm]: 65
- Overall Length [mm]: 80
- Name: IM 1314
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: inner,
Rear, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Manufacturer: SKF
- Name: SK VKDS331014
-
Fitting Position: Front Axle Right,
Lower, Rear - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Height [mm]: 80
- Name: ALT 80927AL
- Manufacturer: ALTE AUTOMOTIVE
- not for PR number: F4S
-
Fitting Position: Rear,
Lower, Front Axle Right, Front Axle Left - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 75
- Manufacturer: MAX
Name: Puks - Kndmik VW P. A6/A7 1,8TFSI/2,0TFSI/2,0TDI/2,8FSI/3,0TFSI/3,0TDI/RS TY 10-
- Quantity: 2
-
Fitting Position: Front Axle,
Rear, inner, Lower Front Axle -
Material: Rubber/
Metal - Thickness [mm]: 80
- Weight [kg]: 0.486
- Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- General Information: control arm bush
- Manufacturer: VIKA
- Mounting Type: Hydro Mount
-
Fitting Position: both sides,
Rear, Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
- Weight [kg]: 0.508
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 09.2007
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 773
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Rear Axle,
both sides, Rear, Lower, outer -
Name: Puks -
Kndmik VW T. A8 02- 10 DOLNEGO - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.12
-
Name: DY 37-
23487 - Manufacturer: DYS
-
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331074
- Mounting Type: Hydro Mount
- Name: SK VKDS331074
- Manufacturer: SKF
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 44,
25 -
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
outer, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.097
- Manufacturer: FEB
- Additional information: NRF31756
- Lisainfo: NRF31756
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - Kndmik VW T. A8/S8/PHATEON 02- ZEW. 44X25MM
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.486
- for OE number: 4D0 407 183 AC
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.484
- Observe service information:
- Manufacturer: SWAG
- Name: SW 30 60 0041
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 44,
25 -
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
outer, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.1
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 75
- Thickness 1 [mm]: 80
- Manufacturer: DELPHI
- Name: DE TD1247W
- not for PR number: F4S
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 75
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- with environmental seal: Carbon neutral
-
Name: Puks -
Kndmik VW P. A6/ A8/ PHAETON - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
-
for OE number: 4E0 407 693 N,
4E0 407 694 N - Length [mm]: 80
- Width [mm]: 75
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 75
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.71
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
both sides - Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 75
- Mounting Type: Hydro Mount
- Axle alignment required after fitting:
- Width [mm]: 75
- Weight [kg]: 0.499
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Model Year from: 2008
-
Fitting Position: Rear Axle Lower,
Rear, inner - Weight [kg]: 0.267
- Packaging length [cm]: 6.1
- Packaging width [cm]: 6.1
- Packaging height [cm]: 6.1
- Manufacturer: FEBEST