• for OE number: 01J 301 383N, 01J 301 383R
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without suction pipe
• Observe system fill quantity:
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission ID: 6HP19
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter, Suction Filter
• Intake Manifold: with suction pipe
• Observe system fill quantity:
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 01J 301 517 B
• Transmission Code: 01J 301 383 N, 01J, 01J 301 383 R
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Manufacturer: JAPKO

• for OE number: 01J 301 383S, 01J 301 383T
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without suction pipe
• Observe system fill quantity:
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: CVT automatic transmission (stepless)
• for components see parts list:
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• Observe system fill quantity:
• Fabrication Number: FSF-AU-008
• Transmission Code: 01J / 01T

• for OE number: 01J301517B
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

Transmission Code: 01J 301 383 N, 01J 301 383 R, automat, bezstopniowa (CVT)

• for OE number: 01J 301 383N, 01J 301 383R
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 6-Speed Automatic Transmission
• Width [mm]: 195
• Height [mm]: 110
• Supplementary Article/Info 2: with oil sump gasket
• Number of mounting bores: 13
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-001
• Manufacturer: NTY
• Name: NTY FSF-AU-001

• for OE number: 01J 301 517 D
• Transmission Code: 01J 301 383 T, 01J, 01J 301 383 S
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.499
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 01J 301 383S, 01J 301 383T
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Filter type: Filter Insert
• Width [mm]: 195
• Height [mm]: 142
• Transmission Type: Automatic Transmission
• Gasket Design: Soft Material Gasket
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Weight [kg]: 0.336
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: ZF6HP26A
• Filter type: Filter Insert
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Transmission Code: 01J, 01J 301 383 T, 01J 301 383 S
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• for OE number: 01J 301 517 B
• Transmission Code: 01J 301 383 N, 01J, 01J 301 383 R
• Transmission Type: CVT automatic transmission (stepless)
• See accessories list for additionally required parts:
• Weight [kg]: 0.516
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: ZF6HP26A
• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• for OE number: 01J 301 517 B
• Transmission Code: 01J 301 383 N, 01J 301 383 R, 01J
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.512
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Quantity Unit: Piece
• Transmission Code: 6HP19, 6HP26
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Screen Filter
• Length [mm]: 231.5
• Width [mm]: 195.5
• Height [mm]: 122
• Material: Plastic
• Weight [kg]: 0.381
• Observe service information:
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 6HP19
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Screen Filter
• Length [mm]: 231.5
• Width [mm]: 195.5
• Height [mm]: 122
• Material: Plastic
• Manufacturer: SWAG
• Name: SW 30 94 8368

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 195
• Height [mm]: 144
• Seal Diameter [mm]: 25
• Transmission Code: 6HP19
• Manufacturer: KAMOKA FILTRY

• Transmission Code: 6HP26 A61
• Supplementary Article/Supplementary Info: without oil
• Observe service information:
• Manufacturer: ZF
• Name: ZF 1068.298.090

Alternative Repair Kit: 1068.298.083, 1068.298.062, 1068.298.084, 1068.298.061, 1068.298.085, 1068.298.054, 1084.298.014, 1084.298.013 SVHC: No information available, please contact the manufacturer!

• Transmission Code: 6HP19
• Manufacturer: HENGST FILTER

Transmission Type: 6-Speed Automatic Transmission, Manual-/optional automatic transmission

• Filter type: Screen Filter
• Transmission Code: 01J, 01J 301 383 S, 01J 301 383 T
• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: 01J, 01J 301 383 T, 01J 301 383 S
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.532
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter
• Number of mounting bores: 24
• Length [mm]: 232
• Width [mm]: 196
• Height [mm]: 113
• Weight [kg]: 0.351
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Number of mounting bores: 13
• Length [mm]: 232
• Width [mm]: 196
• Height [mm]: 105
• Weight [kg]: 0.411
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 231
• Weight [kg]: 0.5
• Manufacturer: DRIVE

• Transmission Type: 6-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Height [mm]: 110
• Transmission Code: 6HP26
• Length [mm]: 223
• Width [mm]: 195
• Weight [kg]: 0.505
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 232
• Number of mounting bores: 13
• Width [mm]: 196
• Height [mm]: 105
• Weight [kg]: 0.411
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 30 10 0266
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Transmission Code: 6HP19
• Weight [kg]: 0.505
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 231
• Width [mm]: 195
• Height [mm]: 142
• Weight [kg]: 0.451
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Aluminium
• Cooling Type: Water-cooled
• Core Length [mm]: 208
• Core Width [mm]: 118
• Core Depth [mm]: 63
• Fabrication Number: CCL-VW-009
• Manufacturer: NTY

• Filter type: Filter Insert
• Length [mm]: 195.2
• Width [mm]: 232
• Height [mm]: 113
• Inner Diameter 2 [mm]: 25
• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 6HP26, 6HP28
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Metal Elastomer Gasket
• Number of Holes: 13
• Recommended change interval [km]: 80,000
• Packaging length [cm]: 38
• Net Weight [g]: 428
• Packaging height [cm]: 5.5
• Packaging width [cm]: 55
• Manufacturer: KNECHT

• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER

• not for transmission ID: JLM/JYN/JYZ, JZA/KLW/KZK
• Recommended change interval [years]: 5
• Recommended change interval [km]: 80,000
• Width [mm]: 195
• Supplementary Article/Supplementary Info: with seal
• Transmission Code: 6HP26
• Transmission Type: 6-Speed Automatic Transmission
• Length [mm]: 223
• See accessories list for additionally required parts:
• Sealing lip material: Rubber
• Number of mounting bores: 13
• Height [mm]: 110
• Weight [kg]: 0.557
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Length [mm]: 231.5
• Width [mm]: 195
• Height [mm]: 142
• Inner Diameter 2 [mm]: 25
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Number of Holes: 23
• Recommended change interval [km]: 80,000
• Packaging width [cm]: 12.8
• Packaging length [cm]: 21
• Packaging height [cm]: 31.9
• Net Weight [g]: 389
• Manufacturer: KNECHT
• Name: KN HX164D

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission

• Transmission Type: 6-Speed Automatic Transmission
• Transmission Code: 6HP19
• Supplementary Article/Supplementary Info: with seal
• Material: Rubber/Metal
• Alternative Repair Kit: 8020009
• Manufacturer: METZGER

• Transmission Type: 6-Speed Automatic Transmission
• Cooling Type: Water-cooled
• Material: Aluminium
• Core Depth [mm]: 63
• Core Width [mm]: 118
• Core Length [mm]: 208
• Manufacturer: NRF

• Transmission Type: 6-Speed Automatic Transmission
• Cooling Type: Water-cooled
• Core Depth [mm]: 99
• Core Length [mm]: 252
• Core Width [mm]: 149
• Material: Aluminium
• Number of ribs: 13
• Supplementary Article/Supplementary Info: without oil filter housing, without gaskets/seals
• Manufacturer: NISSENS
• Lisainfo: AUDI A 6 / S 6 (C6) (04-) S6 - 5.2 i V10
• Additional information: AUDI A 6 / S 6 (C6) (04-) S6 - 5.2 i V10

• not for transmission ID: JLM/JYN/JYZ, JZA/KLW/KZK
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Width [mm]: 195
• Height [mm]: 110
• See accessories list for additionally required parts:
• Transmission Code: 6HP26
• Supplementary Article/Supplementary Info: with seal
• Transmission Type: 6-Speed Automatic Transmission
• Number of mounting bores: 24
• Length [mm]: 223
• Weight [kg]: 0.557
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.