• Fitting Position: Rear Axle Right
• Rod/Strut: Coupling Rod
• paired article number: 5114708
• Diameter [mm]: 10
• Length [mm]: 230
• Net weight [kg]: 0.46

• Fitting Position: Front Axle both sides
• Length [mm]: 71
• Thread Length [mm]: 50
• Spanner Size: 16
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 91
• Pipe Diameter [mm]: 10
• Manufacturer: KAMOKA
• Additional information: 9030103 KAMOKA
• Lisainfo: 9030103 KAMOKA

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• paired article number: 233-06-502
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• paired article number: 233-06-501
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Rod/Strut: Suspension Rod
• Fabrication Number: ZLT-AU-002
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, front, left
• Additional information: Connecting link for stabilizer, front, left

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, front, right
• Additional information: Connecting link for stabilizer, front, right

• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle, Front Axle Right
• Fabrication Number: ZLP-VW-012
• paired article number: ZLP-VW-011
• Manufacturer: NTY

• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle, Front Axle Left
• Fabrication Number: ZLP-VW-011
• paired article number: ZLP-VW-012
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 91
• Rod/Strut: Push Rod
• Thread Size 1: M10X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Material: Aluminium
• Quality class: PJ
• Name: Stabilizer link right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Material: Aluminium
• Quality class: PJ
• Name: Stabilizer link left

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.2
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 04SKV243
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.2
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 04SKV242

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Material: Aluminium
• paired article number: 9030094
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Material: Aluminium
• paired article number: 9030095
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, both sides
• Rod/Strut: Suspension Rod
• Manufacturer: OYODO

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, rear, left/right
• Additional information: Connecting link for stabilizer, rear, left/right

• Fitting Position: Rear Axle both sides
• Length [mm]: 127
• Weight [kg]: 0.386
• Internal Thread [mm]: M 10 x 1,5
• Rod/Strut: Coupling Rod
• Weight [g]: 386
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 91
• Thread Size: FM10X1.5 RHT
• Diameter [mm]: 10
• Rod/Strut: Suspension Rod
• paired article number: 260342
• Weight [kg]: 0.32
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle Right, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Rod/Strut: Suspension Rod
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Rod/Strut: Suspension Rod
• Manufacturer: OYODO

• Fitting Position: Front Axle Right
• paired article number: 520523
• Rod/Strut: Push Rod
• Manufacturer: GSP

• Quantity: 1
• Fitting Position: Front Axle, Right
• Rod/Strut: Coupling Rod
• General Information: Coupling rod for front stabilizer bar; right
• Manufacturer: VIKA

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Diameter [mm]: 11
• Thread Size 2: M10x1.5
• Material: Aluminium
• paired article number: 30-51760
• Weight [kg]: 0.32
• Name: DY 30-51761
• Manufacturer: DYS

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Diameter [mm]: 11
• Thread Size 2: M10x1.5
• Material: Aluminium
• paired article number: 30-51761
• Weight [kg]: 0.33
• Name: DY 30-51760
• Manufacturer: DYS

• Fitting Position: Front Axle Left
• paired article number: 520524
• Rod/Strut: Push Rod
• Manufacturer: GSP ZAWIESZENIE

• Quantity: 1
• Fitting Position: Front Axle, Left
• Rod/Strut: Coupling Rod
• General Information: Coupling rod for front stabilizer bar; left
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Rod/Strut: Coupling Rod
• Length [mm]: 91
• Thread Size: FM10X1.5 RHT
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Right
• Weight [kg]: 0.22
• Rod/Strut: Coupling Rod
• Width [mm]: 38
• Height [mm]: 70
• max. length [mm]: 131
• Material: Forged Aluminium
• Thread Size 1: 10,3
• Thread Size 2: 10,9
• paired article number: A-539
• Name: Stabilizer link right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Weight [kg]: 0.26
• Rod/Strut: Coupling Rod
• Width [mm]: 38
• Height [mm]: 70
• max. length [mm]: 131
• Length [mm]: 97
• Material: Forged Aluminium
• Thread Size 1: 10,3
• Thread Size 2: 10,9
• paired article number: A-538
• Name: Stabilizer link left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Thread Size 1: M10x1.5
• Rod/Strut: Coupling Rod
• Width [mm]: 42
• Height [mm]: 82
• Length [mm]: 90
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Thread Size 2: M10x1.5
• Material: Cast Steel
• Weight [kg]: 0.33
• Name: DY 30-51762
• Manufacturer: DYS

• Fitting Position: Rear Axle both sides
• Required quantity: 2
• paired article number: VKDS 441001
• Rod/Strut: Coupling Rod
• Manufacturer: SKF
• Name: SK VKDS441001

• Fitting Position: Front Axle Left, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Right, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Right
• paired article number: 49398910
• Rod/Strut: Coupling Rod
• Name: COC 49398819
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• paired article number: 49398819
• Rod/Strut: Coupling Rod
• Manufacturer: CORTECO
• Name: COC 49398910

• Fitting Position: Rear Axle
• for OE number: 8E0505465AF
• Rod/Strut: Coupling Rod
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Thread Size: M10x1.5
• Length [mm]: 90
• Pipe Diameter [mm]: 10
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 90
• Material: Steel
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.386
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• paired article number: 81900AL
• Thread Size: M10 x 1,5
• Length [mm]: 90
• Inner Diameter [mm]: 10
• Name: ALT 81901AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• paired article number: 81901AL
• Thread Size: M10 x 1,5
• Length [mm]: 90
• Inner Diameter [mm]: 10
• Name: ALT 81900AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• paired article number: TC1291
• Width [mm]: 70
• Height [mm]: 32
• Length [mm]: 90
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• paired article number: TC1290
• Width [mm]: 70
• Height [mm]: 32
• Length [mm]: 90
• Manufacturer: DELPHI
• Name: DE TC1291

• Fitting Position: Rear Axle
• Weight [kg]: 0.332
• Rod/Strut: Coupling Rod
• Width [mm]: 43
• Height [mm]: 80
• max. length [mm]: 130
• Material: Steel
• Thread Size 1: M10x1,5
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 01-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 90
• Thread Size: M10x1.5
• paired article number: JTS422
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 90
• Thread Size: M10x1.5
• paired article number: JTS421
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 90
• Material: Steel
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.386
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Name: SW 30 93 2491
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Name: COC 49399798
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• paired article number: VKDS 341016
• Rod/Strut: Coupling Rod
• Manufacturer: SKF
• Name: SK VKDS341017

• Fitting Position: Front Axle Left
• paired article number: VKDS 341017
• Rod/Strut: Coupling Rod
• Manufacturer: SKF
• Name: SK VKDS341016

• paired article number: 21920
• Length [mm]: 125
• Thickness [mm]: 38
• Height [mm]: 32
• Internal Thread Size: M10 x 1,5
• Spanner Size: 13
• Material: Aluminium
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Right
• Hole Spacing [mm]: 90
• Weight [kg]: 0.2
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 21922
• Length [mm]: 125
• Thickness [mm]: 38
• Height [mm]: 32
• Internal Thread Size: M10 x 1,5
• Spanner Size: 13
• Material: Aluminium
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left
• Hole Spacing [mm]: 90
• Weight [kg]: 0.2
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Outer Diameter 1 [mm]: 11
• External Thread 2 [mm]: M10x1,5
• Length [mm]: 89.7
• Weight [kg]: 0.376
• Manufacturer: RTS

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Material: Aluminium
• paired article number: 818 0352 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818035310

• Engine Code: BBK
• paired article number: 21926
• Length [mm]: 125
• Thickness [mm]: 38
• Spanner Size: 13
• Material: Aluminium
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left
• Hole Spacing [mm]: 90
• Weight [kg]: 0.25
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Material: Aluminium
• paired article number: 818 0353 10
• SVHC: No SVHC present!
• Name: LU 818035210
• Manufacturer: FAG

• paired article number: 32 72 0024
• Length [mm]: 125
• Thickness [mm]: 38
• Height [mm]: 32
• Internal Thread Size: M10 x 1,5
• Spanner Size: 13
• Material: Aluminium
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left
• Hole Spacing [mm]: 90
• Weight [kg]: 0.2
• Observe service information:
• Name: SW 32 72 0023
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 32 72 0023
• Length [mm]: 90
• Thickness [mm]: 38
• Height [mm]: 32
• Internal Thread Size: M10 x 1,5
• Spanner Size: 13
• Material: Aluminium
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Right
• Hole Spacing [mm]: 90
• Weight [kg]: 0.2
• Observe service information:
• Name: SW 32 72 0024
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 90
• Rod/Strut: Suspension Rod
• paired article number: 260396
• Weight [kg]: 0.22
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Rod/Strut: Suspension Rod
• Fitting Position: Front Axle Right
• paired article number: 25857 02
• Manufacturer: LEMFORDER
• Name: LMI 2585802

SVHC: No information available, please contact the manufacturer!

• Rod/Strut: Suspension Rod
• Fitting Position: Front Axle Left
• paired article number: 25858 02
• Name: LMI 2585702
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, outer
• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 90
• Rod/Strut: Suspension Rod
• paired article number: 260397
• Weight [kg]: 0.26
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.4
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 90
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818047110

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with fastening material
• paired article number: L29633
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with fastening material
• paired article number: L29634
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Rod/Strut: Suspension Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: LEMFORDER
• Name: LMI 3101201

SVHC: No information available, please contact the manufacturer!