Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: BBK
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1100619
- Manufacturer: KAMOKA
- Quantity: 1
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; green; 4 pins
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
-
Name: NTY ECT-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BBK
- Number of connectors: 4
- Manufacturer: 3RG
- Engine Code: BBK
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 001, 8D- Y- 000 001 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 000, 8D- 1- 200 000 - Engine Code: BBK
- Number of pins: 4
- Colour: green
- Manufacturer: DELLO AUTOMEGA
- Fitted Diameter [mm]: 20
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Housing Colour: black
- Number of pins: 4
- Spanner Size: 0
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: DLP
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 4
- for OE number: 059919501A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 4
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- Name: NI 207009
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; black; 4 pins
- Manufacturer: VIKA
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clamp holder
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: 20 mm
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Engine Code: BBK
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BBK
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: BBK
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- for OE number: 078 919 501 C
- Manufacturer: TRUCKTEC
- Engine Code: BBK
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Name: SW 30 93 2510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 4
- Colour: green
-
Supplementary Article/Supplementary Info: with gasket/
seal - Version: IAM
- Article number of recommended accessories: 0905458
- Power [W]: 0.06
- Manufacturer: METZGER
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
black - Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Connector Shape: oval
- Socket colour: black
-
Shut-off Point [°C]: 95,
92 -
Switch Point [°C]: 85,
102 -
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- for OE number: 6U0959481A
- Manufacturer: MEAT & DORIA
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: 22x1,
5 - Number of pins: 3
- Manufacturer: FAE
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; black
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 90
- Socket colour: blue
- Manufacturer: FAE
- Quantity: 1
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; green
- Manufacturer: BORSEHUNG
- Manufacturer Restriction: VAG
- Number of pins: 4
- Cable Length [mm]: 200
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Gold-
plated - Socket Width [mm]: 1.6
-
Supplementary Article/Supplementary Info: with socket housing,
with gasket/ seal - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
rattaprete andur - Manufacturer: HBE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks