• Fitting Position: Front Axle
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Width [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-002
• Manufacturer: NTY
• Name: NTY HCA-AU-002

• Cable Length [mm]: 1,035
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-004
• Manufacturer: NTY

• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) to: 8E..4..400 000
• Sensor Type: Inductive Sensor, Passive sensor
• Overall Length [mm]: 1,370
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Construction Year to: 05.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,330
• Resistor [Ohm]: 1,750
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS124

• Construction Year from: 06.2003
• Vehicle Identification Number (VIN) from: 8E..4..000 001
• for OE number: 8E0927803B
• Cable Length [mm]: 990
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: 8E_4_000001
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) to: 8E..4..050 000
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Sensor Type: Hall Sensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Quantity: 2
• Vehicle Identification Number (VIN) to: 8E-3-500000
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year from: 06.2004
• Vehicle Identification Number (VIN) from: 8E..5..000 001
• Cable Length [mm]: 1,197
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Front Axle
• Cable Length [mm]: 1,015
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 05.2003
• Fitting Position: Front Axle
• Length [mm]: 980
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Cable Length [mm]: 1,005
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Cable Length [mm]: 1,390
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 05.2003
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_1_000001
• Vehicle Identification Number (VIN) to: 8E_3_500000
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 8E-3-350 000
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Construction Year from: 08.2004
• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 1,195
• Socket colour: black

• Construction Year from: 04.2003
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV352
• Manufacturer: ESEN SKV

• Engine Code: BBK
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,370
• Weight [kg]: 0.135
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BBK
• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) to: 8E..4..400000
• Block Separation:
• Fitting Position: Rear Axle Right, Rear Axle
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Fitting Position: Front Axle Right, Rear Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Construction Year to: 05.2003
• Vehicle Identification Number (VIN) to: 8E..3..500 000
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 957
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0086

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Vehicle Identification Number (VIN) from: 8E-1-000001
• Fitting Position: Rear Axle, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Required quantity: 1
• Sensor Type: Hall Sensor
• Cable Length [mm]: 1,360
• Number of pins: 2
• paired article number: 20-0337
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year to: 05.2003
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,650
• for OE number: 8E0927803A
• Number of pins: 7
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS031

• Fitting Position: Rear Axle, Right
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Construction Year to: 08.2004
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,360
• Manufacturer: JPN

• Construction Year from: 06.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,380
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS126

• Fitting Position: Rear Axle Right
• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,330
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0096

• for OE number: 4B0927803E
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Left
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Construction Year to: 08.2004
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,300
• Manufacturer: JPN

• Engine Code: BBK
• Construction Year to: 05.2004
• Fitting Position: Rear Axle, Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with control unit for aut. LDR
• Vehicle Identification Number (VIN) to: 8E..4..050000
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year to: 05.2003
• Fitting Position: Front Axle
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV026

• Fitting Position: Front Axle
• Length [mm]: 975
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fitting Position: Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle Left
• Number of pins: 2
• Cable Length [mm]: 1,307
• Sensor Type: Passive sensor
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0241

• Sensor Type: Passive sensor
• Cable Length [mm]: 1,000
• Number of pins: 4
• Fitting Position: Front Axle Left, Front Axle Right
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 8E..5..000 001
• Fitting Position: Rear Axle
• Guarantee: 5 years guarantee
• Name: HU 131407
• Manufacturer: HUECO / HITACHI

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q3
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Name: DE SS21127-12B1
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Quantity: 1
• for PR number: 8Q3
• Vehicle Identification Number (VIN) from: 8E5000001
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Name: CZUJNIK ABS AUDI T. A4, S4 00- LE
• Manufacturer: DLP

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Sensor Type: Passive sensor
• Cable Length [mm]: 990
• Braking/Driving Dynamics: for vehicles with ABS
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,372
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0030

• Vehicle Identification Number (VIN) from: 8E-1-000001
• Supplementary Article/Info 2: with lid, without sensor
• Name: Paisupaak,pidurivedelik
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Construction Year from: 06.2004
• Vehicle Identification Number (VIN) from: 8E..5..000 001
• Cable Length [mm]: 1,197
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Engine Code: BBK
• Vehicle Identification Number (VIN) from: 8E-5-000 001, 8E-5-000 0012
• Fitting Position: Rear Axle both sides, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Cable Length [mm]: 1,365
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8E-4-000001>8E-5-400
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_5_000001
• for PR number: 8Q0, 8Q1
• Cable Length [mm]: 1,370
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 06.2003
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28
• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 980
• Length [mm]: 380
• for OE number: 8E0927803B
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 8E_3_500 000
• Cable Length [mm]: 975
• Fitting Depth [mm]: 28.1
• Number of pins: 4
• Resistance [Ohm]: 2,300
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Construction Year from: 08.2004
• Overall Length [mm]: 1,440
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Weight [kg]: 0.2
• Cable Length [mm]: 1,370
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30010
• Weight [kg]: 0.13
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30009
• Weight [kg]: 0.13
• Manufacturer: ABS

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Vehicle Identification Number (VIN) to: 8E-5-400 000
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,335
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 6
• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS AUDI T. A4 00- LE/PR
• Manufacturer: BRM

• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• for PR number: 8Q0, 8Q1, 8Q3, 8Q5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Braking/Driving Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Resistor [Ohm]: 1,650
• Cable Length [mm]: 1,360
• Sensor Type: Hall Sensor, Passive sensor
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year from: 08.2004
• Fitting Position: Rear Axle
• Length [mm]: 1,385
• Number of pins: 2
• Plug Type: Female
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV338

• Fitting Position: Rear Axle, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Construction Year to: 08.2004
• Overall Length [mm]: 1,400
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,330
• paired article number: 30831
• Weight [kg]: 0.2
• Manufacturer: ABS

• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV136

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Sensor Type: Active sensor
• Cable Length [mm]: 1,340
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 2, 6
• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• General Information: Brake fluid tank
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Sensor Type: Hall Sensor
• Cable Length [mm]: 1,360
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year to: 05.2004
• Fitting Position: Rear Axle Left
• Resistor [Ohm]: 1,750
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS125

• Fitting Position: Rear Axle, Rear Axle Right
• Vehicle Identification Number (VIN) from: 8E_5_000001
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Name: DE SS20406
• Manufacturer: DELPHI
• Quality class: PJ