• Inner Diameter [mm]: 57.85
• Manufacturer: JP GROUP
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• for OE number: 8E0 145 832 J
• Manufacturer: KAMOKA

• for OE number: 8E0145832N
• Manufacturer: KAMOKA

• Braking/Drive Dynamics: for vehicles without ABS
• Inner Diameter [mm]: 58.5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Inner Diameter [mm]: 57.85
• Material: FPM (fluoride rubber)
• Manufacturer: ELRING

• for OE number: 8E0145832J
• Manufacturer: NRF

• Production date to: 12/05
• for OE number: 8E0145832J
• Manufacturer: SASIC

• Inner Diameter [mm]: 57.85
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Length [mm]: 112
• for OE number: 8E0 145 832 J
• Outer Diameter 1 [mm]: 26
• Outer Diameter 2 [mm]: 31
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• General Information: pressure hose
• Manufacturer: VIKA

• for OE number: 3C0145117J
• Weight [g]: 11
• Name: IM 20280
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 57.85
• Shape: Ring Form
• Material: FPM (fluoride rubber)
• Always compare old and new part (in particular OE No.):
• Alternative Repair Kit: 2400113, 2400118, 2400119, 2400129, 2400277
• Manufacturer: METZGER

• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV454
• Manufacturer: ESEN SKV

• Quantity per packing unit: 10
• Diameter [mm]: 44
• Weight [kg]: 0.025
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 8E0 145 837 F
• Manufacturer: KAMOKA

• for OE number: 3C0145117F
• Weight [g]: 12
• Name: IM 20282
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 8E0 145 837 G
• Manufacturer: KAMOKA

• Length [mm]: 202
• for OE number: 8E0 145832 N
• Outer Diameter 1 [mm]: 26
• Outer Diameter 2 [mm]: 32
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• General Information: pressure hose
• Manufacturer: VIKA

Manufacturer: NRF

• Length [mm]: 198
• for OE number: 8E0 145 837 F
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter 1 [mm]: 63
• Outer Diameter 2 [mm]: 64
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Quantity per packing unit: 10
• Diameter [mm]: 56
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 4.6
• Width [mm]: 58
• Length [mm]: 65.5
• Manufacturer: AJU

Name: USZCZELKA PRZEWODU CHODNICY POWIETRZA VW GOLF 1,9TDI 97-

• Construction Year to: 10.2004
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 220
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Construction Year to: 10.2004
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 170
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 56
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Centre
• Cooling Hose: Piping to charge air cooler, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV116
• Manufacturer: ESEN SKV

• for OE number: 3B0 145 838 A
• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 63
• Fabrication Number: GPP-VW-018
• Manufacturer: NTY

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 56
• Connection Diameter (suction side) [mm]: 62
• Fabrication Number: GPP-VW-017
• Manufacturer: NTY

• for OE number: 3B0145834P
• Manufacturer: KAMOKA

• Quantity per packing unit: 5
• Shape: O-Ring
• Inner Diameter [mm]: 58
• Thickness [mm]: 4.5
• Material: FPM (fluoride rubber)
• Alternatively:

• Production date to: 12/05
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 8E0145837F
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 52
• Connection Diameter (suction side) [mm]: 61
• Fabrication Number: GPP-AU-014
• Manufacturer: NTY

• for OE number: 8E0145837F
• Material: Rubber
• Weight [g]: 188
• Length [mm]: 180
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 55
• Name: IM 223607
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 8E0145834M
• Fitting Position: Outlet
• Fabrication Number: GPP-AU-006
• Manufacturer: NTY

• Quantity per packing unit: 5
• Inner Diameter [mm]: 43.95
• Quantity: 5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: DRM

• Turbocharger Line: Cold Side, Piping to engine block
• Construction Year to: 10.2004
• Hose Length [mm]: 130
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 47
• Manufacturer: DENCKERMANN FILTRY

• Vehicle Identification Number (VIN) from: 8E-4-000001
• Material: Rubber with fabric lining
• Weight [kg]: 0.28
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 3B0 145838 A
• Fitting Position: Upper
• Length [mm]: 185
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 64
• Name: Laadimisohu voolik
• Manufacturer: MAX

• for PR number: D3E
• Weight [kg]: 0.035
• Quantity: 10
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Inner Diameter [mm]: 58.5
• Outer Diameter [mm]: 69.1
• Thickness [mm]: 4.6
• Manufacturer: FEBEST

• Production date to: 12/05
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 8E0145837G
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Vehicle Identification Number (VIN) to: 8E-5-400 000
• Fitting Position: Upper
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Supplementary Article/Info 2: with clamp
• Material: Rubber with fabric lining
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 63
• Manufacturer: YSPARTS

• Turbocharger Line: Hot Side, Turbocharger to piping
• Construction Year to: 10.2004
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 42
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: Manual Transmission
• Turbocharger Line: Hot Side, Turbocharger to piping
• Construction Year to: 10.2004
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 43
• Manufacturer: DENCKERMANN FILTRY

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 52
• Connection Diameter (suction side) [mm]: 61
• Manufacturer: FAST

• Fabrication Number: GPP-AU-020
• Fitting Position: Centre
• Manufacturer: NTY
• Name: NTY GPP-AU-020

• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 58
• Turbocharger Line: Charge air cooler to intake manifold
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Outer Diameter 1 [mm]: 65
• Weight [kg]: 0.18
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 49
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 65
• Manufacturer: FAST

• Fitting Position: Left
• Material: AEM (Ethylene Acrylate Rubber)
• Turbocharger Line: Cold Side
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MEY

• for OE number: 8E0145837G
• Weight [g]: 298
• Length [mm]: 227
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Name: IM 221949
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) to: 8E-3-500000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8E-4-000001
• for PR number: G0Z
• Fitting Position: engine sided, Lower Right
• Turbocharger Line: Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 10.2004
• Turbocharger Line: Cold Side, Piping to engine block
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 130
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 47
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Transmission Type: Automatic Transmission
• Fitting Position: Right, Lower
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fitting Position: Centre
• Cooling Hose: Piping to charge air cooler, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV117

• for OE number: 8D0145834L
• Weight [g]: 180
• Plug connector manufacturer: HENN
• Length [mm]: 146
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 47
• Name: IM 221863
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) from: 8E-4-000001
• Block Separation:
• Fitting Position: engine sided, Lower Right
• Turbocharger Line: Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Centre
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV014

• General Information: pressure hose
• Manufacturer: VIKA

• Length [mm]: 364
• Transmission Type: Manual Transmission
• for OE number: 8E0 145 834 AR
• Outer Diameter 1 [mm]: 51
• Outer Diameter 2 [mm]: 64
• Model Year from: 2004
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• for OE number: 3B0 145 838 A
• Material: Rubber with fabric lining
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: TRU

• Fitting Position: Right Front
• Cooling Hose: Turbocharger to piping, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV031

• Fitting Position: Upper, Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Production date to: 12/05
• for OE number: 3B0145834P
• Manufacturer: SASIC

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 8E0145834AQ
• Name: Laadimisohu voolik
• Manufacturer: NRF

• for OE number: 3B0 145 834 P
• Fitting Position: Exhaust Turbocharger, Upper
• Supplementary Article/Supplementary Info: with quick coupling
• Supplementary Article/Info 2: without clamp
• Manufacturer: METZGER

• Construction Year to: 10.2004
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 42
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Model Year from: 2004
• Transmission Type: Manual Transmission
• for OE number: 8E0 145 834 AR
• Length [mm]: 364
• Outer Diameter 1 [mm]: 51
• Outer Diameter 2 [mm]: 64
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

Manufacturer: YSPARTS

• for OE number: 8E0145834P
• Weight [g]: 329
• Plug connector manufacturer: HENN
• Length [mm]: 272
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 42
• Name: Laadimisohu voolik
• Manufacturer: IMP

• General Information: pressure hose
• Manufacturer: VIKA

• Production date to: 12/05
• Fitting Position: Outlet
• for OE number: 8E0145834AR
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• for OE number: 8E0 145 737 E
• Name: Laadimisohu voolik
• Manufacturer: MAX

• for OE number: 8E0145834M
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Colour: black
• Inner Diameter 1 [mm]: 53
• Inner Diameter 2 [mm]: 48
• Guarantee: 3 years guarantee
• Turbocharger Line: Charge air cooler to piping, Cold Side
• Weight [kg]: 0.45
• Hose Length [mm]: 380
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV459
• Manufacturer: ESEN SKV