• Number of connectors: 4
• Lisainfo: Thrust sensor for intercooler
• Additional information: Thrust sensor for intercooler

• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: ATL
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: EP 1.830.258
• Manufacturer: EPS

• Engine Code: ATL
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059919501A
• Manufacturer: MEAT&DORIA

• Engine Code: ATL
• Name: EP 1.830.376
• Manufacturer: EPS

• Engine Code: ATL
• Manufacturer: FACET

• Number of pins: 4
• Housing Colour: green
• Connector Shape: round
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 254
• Fabrication Number: ECM-AU-000
• Manufacturer: NTY
• Name: NTY ECM-AU-000

• Number of pins: 2
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Manufacturer: NTY
• Name: NTY ECM-AU-001

• Housing Type: without housing
• Supplementary Article/Info 2: with clip, with seal ring
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: DELLO AUTOMEGA

• for OE number: 059 919 501 A
• paired article number: at10064
• Width [mm]: 58
• Height [mm]: 25
• Length [mm]: 25
• Guarantee: 3 years guarantee
• Number of pins: 4
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ATL
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Fitting Position: Fuel Line
• for OE number: 038906081B
• Manufacturer: MEAT & DORIA

• Pressure from [kPA]: 20
• Pressure to [kPA]: 25
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: MAGNETI MARELLI

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 1205185
• Manufacturer: MEAT&DORIA

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV486
• Manufacturer: ESEN SKV

• Quantity: 1
• Weight [kg]: 0.48
• Number of connectors: 2
• Colour: black
• General Information: knock sensor
• Manufacturer: VIKA

• for OE number: 12 38 425
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Length [mm]: 445
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.058
• Manufacturer: ERA

• Cable Length [mm]: 280
• Number of connectors: 3
• Housing Colour: black
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV120
• Manufacturer: ESEN SKV

• for OE number: 038 906 051 C
• Manufacturer: TRUCKTEC

• for OE number: 1100748
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• for OE number: 03G 906 433
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Manufacturer Restriction: FORD, VAG
• Cable Length [mm]: 200
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Number of pins: 4
• Supplementary Article/Info 2: with pipe
• Socket Width [mm]: 1.5
• Plug housing design: Plug sleeve housing
• Contact surface: Gold-plated
• Temperature range from [°C]: 25
• Temperature range to [°C]: 140
• Cable Cross Section [mm²]: 0.75
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: VEMO GERMANY

• Number of pins: 4
• Manufacturer: JPN

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Fitting Position: Fuel Line
• Housing Type: without housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT013113291

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Plug Type: Female
• Number of circuits: 4
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Manufacturer: 3RG

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Length [mm]: 340
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV365

• Engine Code: ATL
• Housing Colour: black
• Name: EP 1.957.144
• Manufacturer: EPS

• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Number of pins: 4
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ATL
• Housing Colour: black
• Manufacturer: FACET

• Required quantity: 1
• Manufacturer: BREMI

• Number of pins: 2
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles without CAN bus system
• Supplementary Article/Info 2: with cable
• Length [mm]: 445
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.48
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 245
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10964

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of pins: 4
• Pressure from [kPA]: 28
• Manufacturer: DELPHI
• Name: DE PS10117

• Length [mm]: 380
• Number of pins: 3
• Cable Length [mm]: 445, 330
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Connector Shape: D Shape
• Number of mounting bores: 1
• Socket colour: black
• for OE number: 045 957 147 A
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Manufacturer: BOSCH
• Name: BS 0261231146

• Quantity: 1
• Weight [kg]: 0.04
• Number of connectors: 3
• Required quantity: 1
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10169

• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• for OE number: 045957147B
• Manufacturer: MEAT & DORIA

• Length [mm]: 358
• Number of connectors: 3
• Cable Length [mm]: 265
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN
• Additional information: F37607
• Lisainfo: F37607

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATL
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.075
• Manufacturer: EPS

• Engine Code: ATL
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with cable protection pipe
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550254
• Total Length [mm]: 450
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Manufacturer: VALEO
• Name: VA 253807
• Lisainfo: VAL253807
• Additional information: VAL253807

• Manufacturer: BOSCH
• Name: BS 0281002976

• Length [mm]: 330
• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: ATL
• Length [mm]: 340
• Name: EP 1.953.423
• Manufacturer: EPS

• Engine Code: ATL
• Length [mm]: 340
• Manufacturer: FACET

• Length [mm]: 358
• Number of connectors: 3
• Cable Length [mm]: 265
• Weight [kg]: 0.04
• Name: SW 30 93 7607
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: VDO

• Length [mm]: 260
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012681051
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 5
• Fabrication Number: EPP-AU-014
• Manufacturer: NTY

• Engine Code: ATL
• Number of pins: 2
• Colour: black
• Manufacturer: VDO

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 038 906 051 C
• Name: SW 30 93 6116
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: Bosch
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 038 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: EPP-AU-038
• Housing Type: without housing
• Manufacturer: NTY

• Number of pins: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Number of pins: 4
• Version: IAM
• Article number of recommended accessories: 2324099
• Manufacturer: METZGER

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108561
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV504

• Engine Code: ATL
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Guarantee: 5 years guarantee
• Cable Length [mm]: 445
• Number of pins: 3
• Manufacturer: HUCO

• Engine Code: ATL
• Operating Mode: Electric
• Voltage [V]: 12
• Housing Type: without housing
• Manufacturer: PIERBURG