• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Overall Length [mm]: 1,000
• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Fitting Position: Front, after catalytic converter
• Quantity: 1
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2002
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Alternatively:
• Cable Length [mm]: 2
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 1 750
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 09.2002
• Exhaust System: after catalytic converter
• Pinge [V]: 12
• Pikkus (mm): 1 175
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Name: CE 09SKV038
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 5
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 09.2002
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 980
• Ülekandeliinide arv: 4
• Kaal (kg): 0,17
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Construction Year to: 08.2002
• Fitting Position: after catalytic converter
• Cable Length [mm]: 880
• Lambda Sensor: Planar probe, Heated
• Name: DE ES20343-12B1
• Manufacturer: DELPHI

• Construction Year to: 08.2002
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Overall Length [mm]: 1,510
• Lambda Sensor: Regulating Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Construction Year from: 09.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 1,100
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,100
• Number of pins: 4
• Number of circuits: 4
• Connector Shape: D Shape
• Socket colour: black
• Weight [kg]: 0.173
• for OE number: 06F 906 262 D
• Cable Length [mm]: 925
• Thread Size: M18 x 1,5
• Housing Colour: black
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 06A906262Q
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,100
• Number of pins: 4
• Weight [g]: 117
• Gross Weight [g]: 150
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Lambda andur: soojendatud
• pikkus üle kõige (mm): 1 760
• Pistikkontaktide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 368003

Fitting Position: before catalytic converter, after catalytic converter

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: AUM
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AUM
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 1 510
• Ülekandeliinide arv: 5
• Kaal (kg): 0,22
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV852

• Lambda Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 630
• Ülekandeliinide arv: 5
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV858

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 520
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AUM
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 1 470
• Ülekandeliinide arv: 5
• Kaal (kg): 0,22
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Name: CE 09SKV860
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV907

• Fitting Position: before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 1,500
• Number of pins: 6
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda andur: Bistabiilne andur
• Kaal (kg): 0,15
• Garantii: 3 aastat garantii
• Tehniline informatsioon: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Engine Code: AUM
• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Exhaust Manifold
• for article number: 81519
• Manufacturer: MEAT&DORIA

• Fitting Position: Front
• Quantity: 1
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 5
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 1,510
• Supplementary Article/Supplementary Info: with accessories
• Lambda Sensor: Broadband lambda sensor, Thread pre-greased
• Number of circuits: 5
• Weight [kg]: 0.155
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pistikkontaktide arv: 5
• pikkus üle kõige (mm): 1 510
• Soovituslik vahetusintervall (km): 250 000
• Manufacturer: METZGER