Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- General Information: Transmission oil filter element
- Manufacturer: BORSEHUNG
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 87
- Outer Diameter [mm]: 32
- Gasket inside diameter [mm]: 41
- Gasket outside diameter [mm]: 47
- Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 87
- Outer Diameter [mm]: 32
- Gasket inside diameter [mm]: 41
- Gasket outside diameter [mm]: 47
- Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
-
Transmission Type: Manual-
/ optional automatic transmission - Outer Diameter [mm]: 34
- Inner Diameter [mm]: 17
- Height [mm]: 87
- Manufacturer: HENGST FILTER
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 85
- Outer Diameter [mm]: 57
- Gasket inside diameter [mm]: 67
- Gasket outside diameter [mm]: 72
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
-
Manufacturer: FEBI-
FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
-
Fabrication Number: FSF-
AU- 014 - Manufacturer: NTY
-
Name: NTY FSF-
AU- 014
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 85
- Outer Diameter [mm]: 57
- Gasket inside diameter [mm]: 67
- Gasket outside diameter [mm]: 72
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
-
Transmission Type: Manual-
/ optional automatic transmission - Outer Diameter [mm]: 71.5
- Inner Diameter [mm]: 21.5
- Height [mm]: 85
- Manufacturer: HENGST FILTER
-
Transmission Code: 0CJ,
0CL, DL382, 0CK - Vehicle Equipment: for vehicles with direct shift transmission
-
Filter type: Pressure Filter,
Filter Insert - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- for OE number: 0CK 325 149 D
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Screen Filter
- Length [mm]: 162
- Width [mm]: 71
- Height [mm]: 56
- Weight [kg]: 0.11
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Screen Filter
- Length [mm]: 162
- Width [mm]: 71
- Height [mm]: 56
- Weight [kg]: 0.11
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 0CJ,
0CL, DL382, 0CK - Vehicle Equipment: for vehicles with direct shift transmission
-
Filter type: Suction Filter,
Filter Insert - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Length [mm]: 162
- Weight [kg]: 0.11
- Width [mm]: 71
- Height [mm]: 55
- Filter type: Screen Filter
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: for 7-
speed automatic transmission -
Transmission Code: DL382,
0CK, 0CL, 0CJ - Height [mm]: 55
- Length [mm]: 181.7
- Width [mm]: 71
- Manufacturer: PURFLUX
- Filter type: Filter Insert
- General Information: Transmission oil strainer kit
- Manufacturer: VIKA
- Filter type: Screen Filter
-
Fabrication Number: FSF-
VW- 020 -
Transmission Type: for 8-
speed automatic transmission - Manufacturer: NTY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Weight [kg]: 0.19
- Filter type: Pressure Filter Insert
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Filter type: Screen Filter,
Filter Insert - Weight [kg]: 0.19
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Cooling Type: water-
cooled - Core Depth [mm]: 163
- Core Length [mm]: 96
- Core Width [mm]: 149
- Material: Aluminium
- Number of ribs: 7
- Inlet Ø [mm]: 10
- Outlet Ø [mm]: 10
-
Supplementary Article/Supplementary Info: without oil filter housing,
without gaskets/ seals - Supplementary Article/Info 2: without filter
- Filter type: Screen Filter
- Length [mm]: 503
- Width [mm]: 339
- Height [mm]: 46
- Weight [kg]: 1.38
- Manufacturer: FEBI BILSTEIN
Transmission Type: for 8-speed automatic transmission, Automatic Transmission Supplementary Article/Supplementary Info: Oil sump with permanently integrated filter element General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Screen Filter
- Length [mm]: 503
- Width [mm]: 339
- Height [mm]: 46
- Weight [kg]: 1.38
- Observe service information:
- Manufacturer: BLUE PRINT SILNIK
Transmission Type: for 8-speed automatic transmission, Automatic Transmission Supplementary Article/Supplementary Info: Oil sump with permanently integrated filter element General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 0CJ,
0CK, 0CL, DL382 -
Supplementary Article/Supplementary Info: with gasket/
seal -
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- See accessories list for additionally required parts:
- Manufacturer: VAICO
Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks