Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
-
Vehicle Identification Number (VIN) to: 8D-
V- 152676 -
Fitting Position: Front Axle both sides,
inner - Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front, inner -
Additional information: Wheel bearing,
front, inner
- Height [mm]: 14.7
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50.3
- Fitting Position: Front Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Alternative Repair Kit: 100 598 0101,
100 598 0101/ SK -
Fitting Position: Rear Axle,
inner - Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Height [mm]: 14.73
- Bearing Type: Tapered Roller Bearing
- Manufacturer: MEYLE
- Piirangutega toode/piirangu info 2: ilma rattakeskmeta
-
Installatsiooni pool: Tagasild,
esisild vasakul, esisild paremal -
Seerianumber: KLP-
AU- 002 - Manufacturer: NTY
-
Name: NTY KLP-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL
- Fitting Position: Rear Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Quality class: PJ
- Name: Wheel bearing kit
-
Seerianumber: KLP-
AU- 004 -
Veljesuurus (toll): 16,
0 - Manufacturer: NTY
-
Name: NTY KLP-
AU- 004
Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal, Esisild Käigukasti liik: Käigukast 5 käiku, Automaatkast, 5 käiku, Käigukast
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 42.8
- Width [mm]: 37
- Bearing Type: Angular Ball Bearing
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter 1 [mm]: 75
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 75
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Quantity per axle: 2
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 43
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 82
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Manufacturer: GSP
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.83
- Supplementary Article/Info 2: with screw
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 75
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: FRRE LR+RE LR+RE
- for OE number: 8D0598625A
- Inner Diameter [mm]: 39
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Siseläbimõõt 1 [mm]: 39
- Siseläbimõõt 2 (mm): 41
-
Kaal (kg): 0,
7 - Välisläbimõõt 1 [mm]: 75
- Laius 1 (mm): 37
- Manufacturer: ABS
- Fitting Position: Front Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Quality class: PJ
- Name: Wheel bearing kit
-
Engine Code: AGA,
ALF, APS, ARJ - Width [mm]: 37
- Outer Diameter [mm]: 82
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 43
- Supplementary Article/Info 2: with screw
- Inner Diameter 2 [mm]: 45
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Installatsiooni pool: Esisild
- Laius (mm): 37
-
Kaal (kg): 0,
68 - Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Inner Diameter 2 [mm]: 41
- Manufacturer: OPTIMAL
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 43
- Width [mm]: 37
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with screw
- Full Set:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
-
Engine Code: ALF,
APS, ARJ, AGA -
Installatsiooni pool: Esisild,
Tagasild - Garantii: 4 aastat garantii
-
Kaal (kg): 1,
87 - Ava Ø 1 (mm): 112
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV438
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Manufacturer: OPTIMAL
- Installatsiooni pool: Esisild
- Laius (mm): 37
-
Kaal (kg): 0,
84 - Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: METALCAUCHO
- Installatsiooni pool: esisild mõlemapoolselt
- Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: JPN
- Installatsiooni pool: Esisild
- Garantii: 4 aastat garantii
-
Kaal (kg): 1,
86 - Ava Ø 1 (mm): 112
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV
- Construction Year from: 08.1997
- Fitting Position: Rear Axle
- Required quantity: 2
- Weight [kg]: 0.966
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Outer Diameter [mm]: 75
- Inner Diameter [mm]: 39
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Model Year from: 1998
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.765
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: FRRE LR+FR LR+FR
- for OE number: 4B0498625A
- Inner Diameter [mm]: 43
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.036
- Supplementary Article/Supplementary Info: with drive shaft bolt
-
Supplementary Article/Info 2: with bolts/
screws, with nut - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610290
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 2 [mm]: 45
- Manufacturer: OPTIMAL
-
Fitting Position: Right,
Left, Rear Axle - Laius 1 (mm): 37
- Siseläbimõõt 1 [mm]: 39
- Välisläbimõõt 1 [mm]: 75
- Manufacturer: SNR
- Name: SN R157.13
- Installatsiooni pool: Esisild
- Garantii: 4 aastat garantii
-
Kaal (kg): 1,
76 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV436
- Laius 1 (mm): 37
- Siseläbimõõt 1 [mm]: 39
- Välisläbimõõt 1 [mm]: 75
- Väändejõud [Nm]: 180
-
Installatsiooni pool: esisild paremal,
esisild vasakul - Manufacturer: SNR
- Name: SN R157.23
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Manufacturer: SKF
- Name: SK VKBA1355
-
Vehicle Identification Number (VIN): [;3B-
3- 450 000], [8D- T- 160956;] -
Fitting Position: Right,
Left, Front Axle - Name: SN R157.11
-
Manufacturer: NTN-
SNR
-
Engine Code: ALF,
AGA, ARJ, APS - Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with nuts,
with drive shaft bolt - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: SKF
- Name: SK VKBA1356
-
Vehicle Identification Number (VIN): [;3B-
3- 450 000], [8D- T- 160956;] -
Fitting Position: Right,
Left, Front Axle - Manufacturer: SNR
- Name: SN R157.18
-
Fitting Position: Front Axle Left,
Front Axle Right - Siseläbimõõt 1 [mm]: 43
- Siseläbimõõt 2 (mm): 45
-
Kaal (kg): 0,
84 - Välisläbimõõt 1 [mm]: 82
- Laius 1 (mm): 37
- Manufacturer: ABS
-
Fitting Position: Right,
Front Axle -
Manufacturer: SNR /
NTN- SNR/ - Name: SN R157.24
-
Engine Code: ALF,
AGA, ARJ, APS - Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with drive shaft bolt,
with nuts - Name: SW 30 10 0725
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Laius (mm): 37
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 1,
57 - vajaminev tükihulk: 2
- Laagriteostus: kuullaager
- Siseläbimõõt [mm]: 45
- Laius (mm): 40
- Välisläbimõõt 1 [mm]: 82
- Välisläbimõõt 2 [mm]: 85
- Siseläbimõõt 1 [mm]: 43
- Üldine informatsioon: Wheel bearing; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610350
- Construction Year from: 08.1997
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 1.056
- Packaging length [cm]: 10.9
- Packaging width [cm]: 8.4
- Packaging height [cm]: 10.9
- Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks