Lisainfo: QB11667K

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 16
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

• Construction Year from: 01.1999
• Vehicle Identification Number (VIN) from: 8DX200001
• Cable Length [mm]: 1,025
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-007
• Manufacturer: NTY
• Name: NTY HCA-AU-007

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 112
• for brake disc diameter [mm]: 280, 288
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, right
• Additional information: Splash shield, front, right

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 112
• for brake disc diameter [mm]: 280, 288
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, left
• Additional information: Splash shield, front, left

• Vehicle Identification Number (VIN) to: 8DX199999
• Construction Year to: 12.1998
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 1,100
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Brake System: ATE
• Length [mm]: 140
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Weight [kg]: 0.015
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1123
• Lisainfo: QB109-1123

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• Brake System: ATE
• Weight [kg]: 0.02
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake System: ATE
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0210
• Lisainfo: LX0210
• Additional information: LX0210

• Fitting Position: Rear Axle, Front Axle
• Brake System: ATE (Teves), TRW
• Name: FR 901123
• Manufacturer: FRENKIT

• Fitting Position: Front Axle, Rear Axle
• Brake System: ATE
• Weight [kg]: 0.024
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• for OE number: 1667526
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• for PR number: 1LB
• Brake System: Teves
• Weight [kg]: 0.027
• Manufacturer: TOMEX C

• Fitting Position: Front Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 8D-X-200001
• for PR number: 1KE
• Brake System: Lucas
• Number of Parts [parts]: 4
• Packaging length [cm]: 18.5
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.085
• Manufacturer: TEXTAR

• Construction Year to: 12.1998
• Cable Length [mm]: 1,100
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-006
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 280, 288
• Fabrication Number: HTO-VW-041
• Manufacturer: NTY
• Name: NTY HTO-VW-041

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 280, 288
• Fabrication Number: HTO-VW-040
• Name: NTY HTO-VW-040
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Värv: must
• Välisläbimõõt [mm]: 300
• Siseläbimõõt [mm]: 112
• Materjal: Raudplekk
• paaris tootenumbrid: 131-07-142
• soovitava lisavarustuse artiklinumber: 231-03-014
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• pidurikettaläbimõõdule (mm): 280
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Quantity per packing unit: 2
• Length [mm]: 255
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0155A
• Manufacturer: QUICK BRAKE

• paired article number: 19-3454
• for brake disc diameter [mm]: 288
• Fitting Position: Front Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paired article number: 19-3453
• for brake disc diameter [mm]: 288
• Fitting Position: Front Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Construction Year from: 01.1999
• Vehicle Identification Number (VIN) from: 8DX200001
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-008
• Rim Size [inch]: 18.0
• Manufacturer: NTY

• Construction Year to: 12.1998
• Fitting Position: Front Axle
• Brake System: ATE
• Block Separation:
• Construction Year from: 08.1999
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Left, Front Axle, Front Axle Left
• Diameter 1/Diameter 2 [mm]: 300/112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Name: CFD 610210
• Manufacturer: DACO

• Fitting Position: Right, Front Axle, Front Axle Right
• Diameter 1/Diameter 2 [mm]: 300/112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Name: CFD 610211
• Manufacturer: DACO

• Fitting Position: Front Axle Left
• for OE number: 8D0615311E
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 8D0615312E
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Engine Code: AFN
• Construction Year to: 12.1998
• for OE number: 8D0 927 803
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,100
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 01.1999
• Fitting Position: Front Axle
• Cable Length [mm]: 1,025
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 120-02-039

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 07.1998
• Vehicle Equipment: for vehicles with headlight levelling (mechanical)
• Vehicle Identification Number (VIN) from: 8DW280001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Cable Length [mm]: 925
• Fitting Depth [mm]: 28
• Fabrication Number: HCA-AU-009
• Manufacturer: NTY

• Fitting Position: Front Axle
• Cable Length [mm]: 1,020
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Name: AB 120-02-122
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for brake disc diameter [mm]: 280, 288, 320
• Block Separation:
• Vehicle Identification Number (VIN) to: ******8D*X*199999
• paired article number: 176763
• Fitting Position: Front Axle Right
• Weight [kg]: 0.223
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: LUCAS, ATE
• for PR number: 1LA
• for brake disc diameter [mm]: 280, 288
• for brake disc thickness [mm]: 13, 22, 15, 25
• Block Separation:
• Fitting Position: Front Axle Left
• paired article number: V10-3904
• Material: Sheet Steel
• Surface: Zinc-coated
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV243
• Weight [kg]: 0.26
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Fitting Position: Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV242
• Weight [kg]: 0.26
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Name: Brake dust shield left
• Quality class: PJ

Lisainfo: AUDI A4, 94- (kvaliteediklass PJ)

• Name: Brake dust shield right
• Quality class: PJ

Lisainfo: AUDI A4, 94- (kvaliteediklass PJ)

• Construction Year from: 01.1999
• Fitting Position: Front Axle
• Length [mm]: 1,000
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• for brake disc diameter [mm]: 280, 288, 320
• Block Separation:
• Vehicle Identification Number (VIN) to: ******8D*X*199999
• paired article number: 176762
• Fitting Position: Front Axle Left
• Weight [kg]: 0.223
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 280, 288, 320
• Block Separation:
• Vehicle Identification Number (VIN) to: ******8D*X*199999
• paired article number: 33 10 5639
• Fitting Position: Front Axle Left
• Weight [kg]: 0.223
• Name: SW 33 10 5638
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 280, 288, 320
• Block Separation:
• Vehicle Identification Number (VIN) to: ******8D*X*199999
• paired article number: 33 10 5638
• Fitting Position: Front Axle Right
• Weight [kg]: 0.223
• Name: SW 33 10 5639
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• for OE number: 8D0615311G
• Material: Sheet Steel
• for brake disc diameter [mm]: 312, 321
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 8D0615312G
• Material: Sheet Steel
• for brake disc diameter [mm]: 312, 321
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 280, 288
• Material: Steel
• paired article number: 8125 29114
• Surface: cataphoretically primed
• Diameter 1/Diameter 2 [mm]: 300/112
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 280, 288
• Material: Steel
• paired article number: 8125 29111
• Surface: cataphoretically primed
• Diameter 1/Diameter 2 [mm]: 300/112
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• paired article number: 131-07-188
• for brake disc diameter [mm]: 312
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left
• Manufacturer: YSPARTS

• paired article number: 234705
• for brake disc diameter [mm]: 288
• Diameter 1/Diameter 2 [mm]: 300/112
• Fitting Position: Front Axle Left
• Net weight [kg]: 0.22
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• paired article number: 234704
• for brake disc diameter [mm]: 288
• Diameter 1/Diameter 2 [mm]: 300/112
• Fitting Position: Front Axle Right
• Net weight [kg]: 0.22
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Manufacturer Restriction: LUCAS, ATE
• for PR number: 1LA
• for brake disc diameter [mm]: 280, 288
• for brake disc thickness [mm]: 13, 22, 15, 25
• Block Separation:
• Fitting Position: Front Axle Left
• paired article number: 6115216
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Construction Year from: 01.1999
• Fitting Position: Front Axle
• Cable Length [mm]: 1,035
• Number of pins: 2
• Sensor Type: Passive sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• paired article number: 11126
• Weight [kg]: 0.15
• Manufacturer: ABS

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 300
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• for brake disc diameter [mm]: 280, 288
• paired article number: 11125
• Weight [kg]: 0.15
• Manufacturer: ABS

• Construction Year from: 01.1999
• Fitting Position: Front Axle
• Cable Length [mm]: 1,025
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: AVG
• Construction Year from: 08.1999
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 08.1999
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,250
• for OE number: 8D0927803D
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS022

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 312, 321
• Fabrication Number: HTO-VW-047
• Manufacturer: NTY
• Name: NTY HTO-VW-047

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 312, 321
• Fabrication Number: HTO-VW-046
• Manufacturer: NTY
• Name: NTY HTO-VW-046

• Fitting Position: Front Axle Left
• Manufacturer: OYODO

• Fitting Position: Front Axle Right
• Manufacturer: OYODO

• for OE number: 8D0 615 311 E
• Fitting Position: Front Axle Left
• Manufacturer: TRUCKTEC

• Construction Year from: 01.1999
• Fitting Position: Front Axle
• Length [mm]: 990
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• paired article number: 2347101
• for brake disc diameter [mm]: 245
• Fitting Position: Rear Axle Right
• Net weight [kg]: 0.46
• Name: Plekk,piduriketas
• Manufacturer: NK

• Engine Code: AVG
• Mounting Type: Plug-in connection
• Construction Year from: 08.1999
• for OE number: 8D0 927 803 B
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,025
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 985
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year to: 12.1998
• Vehicle Identification Number (VIN) to: 8D-X-199999
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 12.1998
• Fitting Position: Front Axle
• Length [mm]: 1,040
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Front Axle Right
• General Information: Cover plate for brake disc; front right
• Manufacturer: VIKA