• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Jämedus/Tugevus (mm): 11
• Lisainfo: Oil seal for crankshaft, 85x105x11 mm
• Additional information: Oil seal for crankshaft, 85x105x11 mm

• Engine Code: AFN
• Engine Number to: 576000
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Laius 1 (mm): 9
• Laius 2 (mm): 11
• Korpusetüüp: koos korpusega
• Lisainfo: Seal flange for crankshaft
• Additional information: Seal flange for crankshaft

• Installatsiooni pool: stirnseitig
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Seerianumber: NUP-VW-010
• Manufacturer: NTY

• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tolmukaitse: koos tolmu kaitseäärisega
• Pöördeliik: Vahelduvkeere
• Installatsiooni pool: stirnseitig
• Materjal: FPM (Fluor-Kautschuk)
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Laius (mm): 10
• SVHC: SVHS aineid ei esine
• Manufacturer: INA
• Name: LU 413009310

• Required quantity: 1
• Quantity per packing unit: 10
• Installatsiooni pool: stirnseitig
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: AFN, AVG
• Installatsiooni pool: ees
• Kõrgus 1 (mm): 10
• Välisläbimõõt 1 [mm]: 47
• Siseläbimõõt 1 [mm]: 32
• Materjal: FPM (Fluor-Kautschuk)
• OE-numbri jaoks: 026103085D
• Pöördeliik: Vahelduvkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• Manufacturer: CORTECO
• Name: CO 12012709
• Additional information: 12012709
• Lisainfo: 12012709

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• alternatiivne remondikomplekt: 325.156
• Manufacturer: ELRING
• Lisainfo: 325.155 ELR
• Additional information: 325.155 ELR

• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: stirnseitig
• Kaal (kg): 0,03
• Manufacturer: FEBI BILSTEIN
• Additional information: FE03598
• Lisainfo: FE03598

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Engine Code: AFN, AVG
• Block Separation:
• Materjal: FPM (Fluor-Kautschuk)
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: A SL
• Pöördeliik: Vahelduvkeere
• Manufacturer: REINZ
• Name: RN 81-19299-10
• Lisainfo: 81-19299-10
• Additional information: 81-19299-10

• Installatsiooni pool: stirnseitig
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Jämedus/Tugevus (mm): 10
• Üldine informatsioon: Oil seal for camshaft; 47*10*32
• Manufacturer: VIKA

• Jämedus/Tugevus (mm): 10
• OE-numbri jaoks: 068 103 085 E
• Installatsiooni pool: stirnseitig
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tolmukaitse: koos tolmu kaitseäärisega
• Pöördeliik: Vahelduvkeere
• Installatsiooni pool: stirnseitig
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• Block Separation:
• Engine Code: AFN, AVG
• Construction Year from: 08.1999
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Pöördeliik: Vahelduvkeere
• Manufacturer: AJUSA

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• alternatiivne remondikomplekt: 325.155
• Manufacturer: ELRING

• OE-numbri jaoks: 068 103 051 G
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Installatsiooni pool: kastipoolselt
• Manufacturer: TRUCKTEC

• Installatsiooni pool: Silindripea
• Üldine informatsioon: Oil seal for camshaft
• Manufacturer: VIKA

• Engine Code: AFN
• Engine Number to: 576000
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Laius (mm): 11
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 0716

• Construction Year from: 08.1999
• Engine Code: AFN
• Installatsiooni pool: kastipoolselt
• Kõrgus (mm): 12
• Välisläbimõõt [mm]: 105
• Siseläbimõõt [mm]: 85
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Manufacturer: BGA

• Construction Year to: 07.1997
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 11
• Tolmukaitse: koos tolmu kaitseäärisega
• Pöördeliik: Vasakkeere
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: kastipoolselt
• alternatiivne remondikomplekt: 105 753
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: stirnseitig
• Kõrgus 1 (mm): 10
• Välisläbimõõt 1 [mm]: 47
• Siseläbimõõt 1 [mm]: 32
• Materjal: PTFE (Polytetrafluorethylen)
• OE-numbri jaoks: 038103085A
• Pöördeliik: Paremkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• Manufacturer: CORTECO
• Name: CO 20026413
• Additional information: 20026413
• Lisainfo: 20026413

• Fitting Position: transmission sided
• Engine Code: AFN
• Engine Number to: AFN 576 000
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 11
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vasakkeere
• Materjal: FPM (Fluor-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• alternatiivne remondikomplekt: 829.056
• Manufacturer: ELRING
• Lisainfo: 342.093 ELR
• Additional information: 342.093 ELR

• Fitting Position: transmission sided
• Engine Number to: AFN 576 000
• Engine Code: AFN
• Materjal: FPM (Fluor-Kautschuk)
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 11
• Tüüp simmerling tihend: A SL
• Pöördeliik: Vasakkeere
• Kõrgus 1 (mm): 9
• Manufacturer: REINZ
• Name: RN 81-23708-40
• Lisainfo: 81-23708-40
• Additional information: 81-23708-40

• Jämedus/Tugevus (mm): 11
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,058
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AFN
• Engine Number to: AFN 576 000
• Quantity per packing unit: 5
• Jämedus/Tugevus (mm): 11
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Installatsiooni pool: kastipoolselt
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1998
• Piirangutega toode/piirangu info 2: koos flantsiga
• Installatsiooni pool: kastipoolselt
• Seerianumber: NUP-VW-006
• Manufacturer: NTY

• Required quantity: 1
• Quantity per packing unit: 5
• Installatsiooni pool: kastipoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: transmission sided
• Block Separation:
• Engine Code: AFN, AVG
• Construction Year from: 08.1999
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 12
• Manufacturer: AJUSA

• Engine Code: AFN
• Engine Number to: 576000
• Fitting Position: transmission sided
• Piirangutega toode/piirangu info 2: koos flantsiga
• Välisläbimõõt [mm]: 111
• Siseläbimõõt [mm]: 85
• Kõrgus (mm): 16
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: kastipoolselt
• Korpusetüüp: koos korpusega
• Korpuse materjal: Alusulam
• alternatiivne remondikomplekt: 101 407
• Materjal, äärik: PTFE (Polytetrafluorethylen)
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: transmission sided
• Vehicle Identification Number (VIN) from: 4BW1000001
• Construction Year from: 08.1999
• Engine Code: AVG
• Materjal: PTFE (Polytetrafluorethylen)
• OE-numbri jaoks: 038103171
• Manufacturer: FAI

• Fitting Position: transmission sided
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 11
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Engine Code: AFN
• Engine Number to: AFN 576 000
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 11
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vasakkeere
• Materjal: FPM (Fluor-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Manufacturer: ELRING

• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,17
• Siseläbimõõt [mm]: 85
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos flantsiga
• Üldine informatsioon: Oil sealing flange for crankshaft; rear
• Manufacturer: VIKA

• Installatsiooni pool: rihmarattapoolne
• Manufacturer: CORTECO
• Name: CO 289077
• Additional information: 289077
• Lisainfo: 289077

• Engine Code: AFN, AVG
• Quantity per packing unit: 5
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AVG
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Tüüp simmerling tihend: SP
• Korpusetüüp: koos korpusega
• Name: DRM 01416
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Fitting Position: transmission sided
• Engine Number from: AFN 576 001
• Engine Code: AFN, AVG
• Block Separation:
• Piirangutega toode/piirangu info 2: koos flantsiga
• Manufacturer: REINZ
• Name: RN 81-90000-00

• Fitting Position: transmission sided
• Engine Code: AVG, AFN
• Block Separation:
• Engine Number from: AFN 576 001
• Siseläbimõõt [mm]: 85
• Tüüp simmerling tihend: SP
• Pöördeliik: Vasakkeere
• Korpusetüüp: koos korpusega
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Jälgida montaaži juhiseid:
• Montaažiinfo: Paigaldamine kuiv ja ilma täiendava õli ja rasva
• Manufacturer: ELRING
• Lisainfo: 804.850 ELR
• Additional information: 804.850 ELR

Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk)

• Välisläbimõõt [mm]: 47
• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 32
• Installatsiooni pool: kastipoolselt
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,17
• Siseläbimõõt [mm]: 85
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos flantsiga
• Üldine informatsioon: Oil sealing flange for crankshaft; rear
• Manufacturer: VIKA

• Engine Code: AFN, AVG
• Installatsiooni pool: kastipoolselt
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Kõrgus 1 (mm): 15,7
• Välisläbimõõt 1 [mm]: 131
• Välisläbimõõt 2 [mm]: 152
• Siseläbimõõt 1 [mm]: 85
• Materjal: PTFE (Polytetrafluorethylen)
• OE-numbri jaoks: 028103171B
• Pöördeliik: Vahelduvkeere
• Manufacturer: CORTECO
• Name: CO 20033462

• Siseläbimõõt [mm]: 85
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,17
• Piirangutega toode/piirangu info 2: koos flantsiga
• Manufacturer: FEBI BILSTEIN
• Additional information: FE37745
• Lisainfo: FE37745

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.