• Construction Year to: 12.1999
• Fitting Position: Rear
• Material: Metal
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: AQD, APR, AMX, ALG, ACK
• Construction Year to: 12.1998
• Quantity per packing unit: 10
• Fitting Position: Rear Axle both sides
• Height [mm]: 4.1
• Inner Diameter [mm]: 11.1
• Outer Diameter [mm]: 20
• Name: TUGIRONGAS,AMORDI TUGILAAGER
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Manufacturer: GSP AUTOMOTIVE

• Engine Code: AQD, APR, AMX, ALG, ACK
• Fitting Position: Rear Axle both sides
• Height [mm]: 4.1
• Inner Diameter [mm]: 11.1
• Outer Diameter [mm]: 20
• Name: TUGIRONGAS,AMORDI TUGILAAGER
• Manufacturer: MAX

• Construction Year to: 12.1998
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Mounting Type: Rubber Mount
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year to: 12.1998
• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Mounting Type: Rubber Mount
• Lisainfo: Support ring, lower, shock absorber, rear
• Additional information: Support ring, lower, shock absorber, rear

• Vehicle Identification Number (VIN) to: 8D-W-006 470
• Engine Code: ALG, AMX, APR, AQD, ACK
• Vehicle Identification Number (VIN) from: 8D-W-006 471
• Fitting Position: Upper
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 72
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Inner Diameter [mm]: 12
• Name: Laager - K„„ndmik. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Fabrication Number: AD-VW-032
• Manufacturer: NTY

• Fitting Position: Front Axle
• for OE number: 4D0412137C
• for manufacturer number: 2020035
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 12
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-022
• Manufacturer: NTY
• Name: NTY AD-VW-022

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 4D0 412 377 D
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D
• Manufacturer: GSP

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Required quantity: 2
• Material: Rubber/Metal
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• Engine Code: APR, AQD
• Fitting Position: Upper, Front Axle both sides
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• for OE number: 4D0412137C
• for manufacturer number: 2020177
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: MEY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for OE number: 4D0412377F
• Manufacturer: SASIC

• Fitting Position: Front Axle
• Construction Year to: 08.1997
• Vehicle Identification Number (VIN) to: W 012 334
• Manufacturer: HUTCHINSON

• Fitting Position: Rear Axle
• Height [mm]: 38
• Required quantity: 2
• Material: Rubber/Metal
• Outer Diameter [mm]: 87
• Centering Diameter [mm]: 12
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Fabrication Number: AB-VW-018K
• Manufacturer: NTY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.44
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0017
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. VW P. A4/A6/ P
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• for OE number: 4D0412377F
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Weight [g]: 172
• Name: IM 35005
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Front Axle
• General Information: Rubber and dust cover kit; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.2
• Packaging length [cm]: 9.6
• Packaging width [cm]: 8.3
• Packaging height [cm]: 8.2
• Manufacturer: MONROE

• Fitting Position: Front Axle
• for OE number: 4D0412137C
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Height [mm]: 37
• Weight [kg]: 0.15
• Material: Rubber/Metal
• Weight [g]: 150
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Right, Left, Rear Axle
• Number of Parts [parts]: 2
• Name: SN KB957.12
• Manufacturer: SNR

• Fitting Position: Front Axle
• Name: CFD PK4711
• Manufacturer: DACO

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8D...1...200000
• SVHC: No SVHC present!
• Name: LU 814010110
• Manufacturer: FAG

• Construction Year to: 11.2000
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Manufacturer: JP GROUP

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Required quantity: 2
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Name: MM APK0064
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• for OE number: 4D0 412 137 C
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-1219
• Additional information: 72-1219

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: JPA

• Construction Year to: 11.2000
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Kaal (kg): 0,463
• vajaminev tükihulk: 1
• Name: Vedruamordi tugilaager
• Manufacturer: TED

OE-numbri jaoks: 8D0 412 065 F, 8D0 412 065 E, 8D0 412 065, 8D0 412 065 D

• for OE number: 8D0412065
• Fitting Position: Front Axle
• Weight [g]: 525
• Supplementary Article/Info 2: without bearing
• Name: IM 37426
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Construction Year to: 11.2000
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT
• Additional information: D5096
• Lisainfo: D5096

• Fitting Position: Front Axle
• Weight [g]: 516
• Supplementary Article/Info 2: without bearing
• Name: IM 35029
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Rear Axle
• Thread Size: M12X1,5X95
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Technical Information: mounting (x1)
• Name: Laager - K„„ndmik. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: KYB

• Construction Year to: 11.2000
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: 915708 KYB
• Lisainfo: 915708 KYB

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Guarantee: 5 years guarantee
• Weight [kg]: 0.4
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Vehicle Identification Number (VIN) to: 8D-W-012334
• Fitting Position: Front Axle
• for OE number: 4D0412377D
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

Manufacturer: FEBEST

• Suspension: for vehicles with standard suspension
• for combined PR number: 1BA+1BB+1BC
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.55
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN) to: 8D-W-012 334
• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: PODUSZKA AMORT. VW P. A4/PASSAT 96- LE/PR
• Manufacturer: SKF

• Fitting Position: Right, Left, Front Axle
• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.11

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.12

• for OE number: 8D0412065
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [g]: 699
• Supplementary Article/Info 2: with ball bearing
• Name: IM 35059
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Vehicle Identification Number (VIN) from: 8D-W-012 335
• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF
• Name: SK VKDA35118

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: BILSTEIN
• Name: BI 12-117642
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Quantity per axle: 1
• Manufacturer: SKF

Suspension: for vehicles without heavy duty suspension, for vehicles without sports suspension

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: BI 11-267959
• Manufacturer: BILSTEIN
• Quality class: Q

• Vehicle Identification Number (VIN) to: 8D-W-012 334
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with spring seat
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 8D-W-012 335
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with spring seat
• Supplementary Article/Info 2: without rolling bearing
• Material: Aluminium
• Quantity per axle: 2
• Alternative Repair Kit: 6490279
• Manufacturer: METZGER

• Weight [kg]: 2.27
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV099
• Manufacturer: ESEN SKV