Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - for PR number: 1BV
- Suspension: for vehicles with sports suspension
-
Fitting Position: Upper,
Rear, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Lisainfo: AUDI A4 AVANT / QUATTRO
- Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, Front, inner, both sides - Article number of recommended accessories: 39430 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSAT 97- - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, inner -
Mounting Type: Rubber-
Metal Mount -
Manufacturer: JP-
GROUP -
Lisainfo: Rubber mount for wishbone,
front, rear -
Additional information: Rubber mount for wishbone,
front, rear
- Suspension: for vehicles without sports suspension
-
Fitting Position: Upper Front Axle,
inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Engine Code: AQD,
APR, AMX, ALG, ACK -
Vehicle Identification Number (VIN) to: 8D-
W- 260129 -
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, inner -
Additional information: Rubber mount for wishbone,
front, inner
-
Fitting Position: Lower Front Axle,
Front, outer - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, outer -
Additional information: Rubber mount for wishbone,
front, outer
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 50
- Inner Diameter [mm]: 12
- Width [mm]: 31
- Manufacturer: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Stabilizer link mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, ees, väljas -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 49
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 40,
24 - Manufacturer: MERTZ
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 40
- Inner Diameter [mm]: 12
- Width [mm]: 42
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Height [mm]: 40
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Weight [kg]: 0.07
-
Name: DY 37-
06034- 5 - Manufacturer: DYS
-
Engine Code: AQD,
APR, AMX, ALG, ACK -
Vehicle Identification Number (VIN) from: 8D-
W- 260130 -
for PR number: 1BA,
1BB, 1BC, 1BE, 1BP, 1BQ, 1BT -
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AQD,
APR, AMX, ALG, ACK - Suspension: for vehicles with sports suspension
- Construction Year from: 02.1999
- for PR number: 1BV
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: outer,
Lower, Front Axle, Front, both sides - Length 1 [mm]: 50
- Length 2 [mm]: 41
- Inner Diameter [mm]: 12
- Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.1
- Required quantity: 2
- Outer Diameter [mm]: 40.3
- Manufacturer: TEDGUM
- Quantity per packing unit: 2
- Diameter [mm]: 46
-
Mounting Type: Rubber-
Metal Mount - Height [mm]: 40
- Axle alignment required after fitting:
-
Fitting Position: both sides,
inner, Upper Front Axle - Control/Trailing Arm Type: for control arm
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Upper,
Front Axle - Manufacturer: GSP
-
Vehicle Identification Number (VIN) to: 8D-
W- 245 000 -
Fitting Position: Upper,
inner, Right, Left, Front Axle - Outer Diameter [mm]: 46.5
- Inner Diameter [mm]: 10.2
- Weight [kg]: 0.07
- Manufacturer: CORTECO
- Name: COC 21652949
-
Fitting Position: Front,
Lower Front Axle, outer - Weight [kg]: 0.095
-
Material: Rubber/
Metal - Thickness [mm]: 49
- Required quantity: 2
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 - General Information: Bush for control arm
- Manufacturer: VIKA
- Outer Diameter 1 [mm]: 40
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 50
- Manufacturer: BGA
Fitting Position: outer, Lower, Front, Front Axle Left, Front Axle Right
-
Engine Code: APR,
AQD, AMX -
Fitting Position: Front Axle,
Front, outer, Right, Left - Outer Diameter [mm]: 40.3
- Inner Diameter [mm]: 12.1
- Weight [kg]: 0.09
- Manufacturer: CORTECO
- Name: COC 21652796
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Width [mm]: 50
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829009810
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, ees, sees - Pikkus (mm): 60
-
Materjal: Kumm/
metall - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 50
- Manufacturer: MERTZ
- Vehicle Identification Number (VIN) to: ******8D*W*245000
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 47,
23 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right - Weight [kg]: 0.078
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Rear, Upper - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Name: DE TD437W
-
Fitting Position: Front Axle,
Rear, Upper - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.5
- for OE number: 4D0407515C
- Manufacturer: SASIC
-
Engine Code: AMX,
AQD, APR, ATQ, AHA - Vehicle Identification Number (VIN) from: ******8D*X*200001
- Suspension: for vehicles with lowered suspension
- for PR number: 1BV
- Block Separation:
- Vehicle Identification Number (VIN) to: ******8D*1*082000
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, Front, outer, both sides - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- DOLNA - Manufacturer: MAX
- Vehicle Identification Number (VIN) to: ******8D*W*245000
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
23 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right - Weight [kg]: 0.075
- Name: SW 30 60 0029
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: inner,
Upper Front Axle - Weight [kg]: 0.078
-
Material: Rubber/
Metal - Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 47,
23 - General Information: Bush for control arm
- Manufacturer: VIKA
- Fitting Position: Lower Front Axle
-
Fabrication Number: ZTP-
AU- 005A - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
outer, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 40
- Thickness 1 [mm]: 50
- Name: DE TD441W
- Manufacturer: DELPHI
-
Engine Code: AMX,
AQD, APR, ATQ, AHA - Vehicle Identification Number (VIN) from: ******8D*X*200001
- Suspension: for vehicles with lowered suspension
- for PR number: 1BV
- Block Separation:
- Vehicle Identification Number (VIN) to: ******8D*1*082000
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Name: SW 32 93 0696
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Upper - Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 46
- Height [mm]: 40
- Name: ALT 80928AL
- Manufacturer: ALTE AUTOMOTIVE
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Height 1 [mm]: 42
- Height 2 [mm]: 49.8
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40.5
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 100
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle,
inner, Upper, in front of axle - Required quantity: 2
- Height 1 [mm]: 40
- Height 2 [mm]: 26
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Manufacturer: KAVO
-
Fitting Position: Upper Front Axle,
inner -
Material: Rubber/
Metal - Outer Diameter [mm]: 46
- Manufacturer: KAMOKA
- Thickness [mm]: 49
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal - Weight [kg]: 0.095
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: FEB
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Engine Code: AHA
- Outer Diameter 1 [mm]: 46
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 10
- Thickness [mm]: 40
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: BGA
Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Height 1 [mm]: 26
- Height 2 [mm]: 39.8
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.4
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 80
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- for OE number: 4D0407182G
- Manufacturer: SASIC
-
Installatsiooni pool: kahepoolne,
ees, taga, esisild peal - Pikkus 2 [mm]: 26
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
- vajaminev tükihulk: 2
-
Kaal (kg): 0,
08 - Pikkus 1 [mm]: 40
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Width 1 [mm]: 32
- Width 2 [mm]: 60
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829009710
-
Engine Code: APR,
AQD, AMX -
Fitting Position: Front Axle,
Front, inner, Right, Left - Outer Diameter [mm]: 50.2
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.2
- Manufacturer: CORTECO
- Name: COC 21652815
- Suspension: for vehicles without sports suspension
-
Installatsiooni pool: esisild mõlemapoolselt,
üleval, sees -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
-
Kaal (kg): 0,
086 - Pikkus (mm): 40
- Manufacturer: RTS SA
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal, all, väljas -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 30
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 36,
51 - Manufacturer: MERTZ
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 94- QUATTRO
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 94- QUATTRO
(kvaliteediklass: PJ)"
- Thickness [mm]: 49
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal - Weight [kg]: 0.092
- Observe service information:
- Name: SW 32 69 0003
- Manufacturer: SWAG
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles without sports suspension
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 97- - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: Front Axle,
inner, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 60
- Manufacturer: DELPHI
- Name: DE TD440W
-
Fitting Position: Lower,
outer, Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331012
- Height [mm]: 50
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 40.2
- Name: SK VKDS331012
- Manufacturer: SKF
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Name: SW 30 60 0031
- Manufacturer: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: for control arm
- Axle alignment required after fitting:
-
Fitting Position: outer,
Rear Axle, Lower -
Mounting Type: Rubber-
Metal Mount - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: 8D-
W- 260 129 -
Fitting Position: Rear,
inner, Upper, Front, Front Axle both sides - Required quantity: 4
- paired article number: VKDS 331021
- Name: SK VKDS331021
- Manufacturer: SKF
- Height [mm]: 50
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: MEY
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, outer General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: inner,
Front, Front Axle both sides, Lower - Weight [kg]: 0.202
- Length [mm]: 60
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- General Information: Bush for control arm
- Manufacturer: VIKA
- Block Separation:
- Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Name: DE TD871W
Fitting Position: Front Axle, inner, in front of axle, Upper, behind the axle
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: outer,
Rear Axle, Left, Right, Lower -
Control/Trailing Arm Type: for triangular control arm
(CV) -
Mounting Type: Rubber-
Metal Mount - Weight [g]: 145
- Name: IM 1500
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Height [mm]: 60
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 50
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: MEY
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, inner General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, outer - for OE number: 4D0 407 181 F
- Manufacturer: GSP
-
Fitting Position: Lower,
inner, Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331013
- Height [mm]: 60
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Name: SK VKDS331013
- Manufacturer: SKF
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Manufacturer: KAMOKA
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, sees, ees -
Välisläbimõõt [mm]: 50,
3 -
Siseläbimõõt [mm]: 12,
2 - Pikkus (mm): 60
-
Kaal (kg): 0,
202 - Manufacturer: RTS SA
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Lower - Height [mm]: 30
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
-
Control/Trailing Arm Type: for semi-
trailing arm - Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A4 QUATTRO - Manufacturer: MEY
- for PR number: 1BV
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Suspension: for vehicles with sports suspension
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) from: 8D-
W- 245 001 -
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Quantity per axle: 4
- Manufacturer: LEMFORDER
- Name: LMI 2590901
SVHC: No information available, please contact the manufacturer!
- Model Year to: 1999
-
Fitting Position: Front,
Rear, Upper Front Axle, outer - Manufacturer: FEBEST
- Suspension: for vehicles with sports suspension
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: Front Axle,
Lower, Front, inner - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Height [mm]: 60
- Name: ALT 80990AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, outer - for OE number: 4D0 407 182 E
- Manufacturer: GSP
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 101
-
Siseläbimõõt [mm]: 12,
3 -
Välisläbimõõt [mm]: 56,
4 - Manufacturer: MERTZ
-
Kaal (kg): 0,
145 - vajaminev tükihulk: 4
- Pikkus 1 [mm]: 49
-
Installatsiooni pool: Tagasild,
üleval - Pikkus 2 [mm]: 21
-
Välisläbimõõt [mm]: 38,
4 - Siseläbimõõt [mm]: 12
-
Name: Puks -
Kndmik VW T. A4 QUATTRO - Manufacturer: TED
- Control/Trailing Arm Type: for control arm
- Length 2 [mm]: 40
- Length 1 [mm]: 55
-
Fitting Position: Rear Axle,
Upper, outer, both sides - Required quantity: 2
- Outer Diameter [mm]: 37.5
- Inner Diameter [mm]: 12
- Weight [kg]: 0.225
-
Name: Puks -
Kndmik VW T. A4 QUATTRO - Manufacturer: TED
- Thickness [mm]: 30
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
51 -
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right, outer, Lower -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.144
-
Name: Puks -
Kndmik VW T. A4 QUATTRO LE/ PR - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Driving Dynamics: for vehicles with ABS
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 50.4
- Length [mm]: 60
- paired article number: 270327
- Weight [kg]: 0.21
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
- Thickness [mm]: 30
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
51 -
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right, outer, Lower -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.15
- Name: SW 30 93 2226
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 12
-
Fitting Position: Rear,
Rear Axle -
Name: Hlss,
ootshoova kinnitus - Manufacturer: MAX
- Siseläbimõõt [mm]: 12
- vajaminev tükihulk: 4
-
Installatsiooni pool: Tagasild,
all, sees, ees, kahepoolne - Pikkus 1 [mm]: 25
- Pikkus 2 [mm]: 16
-
Välisläbimõõt [mm]: 44,
3 -
Kaal (kg): 0,
098 - Name:
- Manufacturer: TED
-
Vehicle Identification Number (VIN) to: 8D-
W- 104 628 -
Engine Code: ACK,
AHA, ALG -
Fitting Position: Lower,
Rear, Front Axle Left, Front Axle Right - for OE number: 4D0 407 183 P
-
Material: Rubber/
Metal - Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
both sides, Upper - Control/Trailing Arm Type: Control Arm
- Required quantity: 4
- Height [mm]: 40
- Outer Diameter [mm]: 46.3
- Inner Diameter [mm]: 10.1
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.102
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Engine Code: AQD,
APR, AMX, ALG, ACK - Construction Year to: 11.2000
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
- Width [mm]: 65
- Axle alignment required after fitting:
- old version:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.14
-
Fitting Position: Rear Axle Right,
Lower, outer, Rear Axle Left -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 36.1
- Length [mm]: 30
- Manufacturer: RTS
-
Vehicle Identification Number (VIN) to: 8D-
W- 245 000 - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Quantity per axle: 4
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Mounting Type: Hydro Mount
- Control/Trailing Arm Type: for control arm
- Width [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: MAX
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: inner,
Lower Front Axle - Manufacturer: GSP
- Fitting Position: Front Axle
- for OE number: 8K0 407 515
- Guarantee: 3 years guarantee
- Width [mm]: 90
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"
- Pikkus 1 [mm]: 58
- Pikkus 2 [mm]: 35
- vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 58,
3 -
Kaal (kg): 0,
33 -
Installatsiooni pool: taga,
Tagasild - Name:
- Manufacturer: TED
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 65
- Thickness 1 [mm]: 80
- Manufacturer: DELPHI
- Name: DE TD439W
-
Engine Code: AMX,
APR, AQD, ATQ, ALG, AHA, ACK - Block Separation:
-
Vehicle Identification Number (VIN) to: 8D-
T- 160 956 - for OE number: KIT 02
- Fitting Position: Front Axle both sides
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 1.6
- Control/Trailing Arm Type: Control Arm
- Manufacturer: SKV GERMANY
- Name: CE 04SKV111
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 12
- Thickness [mm]: 80
- Manufacturer: BGA
- Construction Year from: 06.1996
- Construction Year to: 08.2001
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 483
- Manufacturer: GATES
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper, inner - Height [mm]: 49
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A80/ A4 QUATTRO - Manufacturer: MEY
- Lisainfo: 1005050004
- Additional information: 1005050004
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Manufacturer: GSP
- Quality class: PJ
- Name: Suspension frame
- Fitting Position: Front Axle
- Weight [kg]: 0.55
- Height 1 [mm]: 65
- Height 2 [mm]: 80.2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64.6
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 550
- Manufacturer: METALCAUCHO
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 64
- Length [mm]: 80
- paired article number: 270437
- Weight [kg]: 0.51
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower
-
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Manufacturer: SKF
- Name: SK VKDS331014
-
Fitting Position: Front Axle Right,
Lower, Rear - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 65
- Height [mm]: 80
- Name: ALT 80927AL
- Manufacturer: ALTE AUTOMOTIVE
-
Engine Code: APR,
AQD, AMX -
Fitting Position: Front Axle,
Rear, inner, Right, Left - Total Length [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.53
- Manufacturer: CORTECO
- Name: COC 21652814
-
Fitting Position: Rear,
inner, Lower, Front Axle -
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 455
- new version:
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Length [mm]: 65
- Overall Length [mm]: 80
- Name: IM 1314
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Rear,
inner, Lower Front Axle - Weight [kg]: 0.486
-
Material: Rubber/
Metal - Thickness [mm]: 80
- Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- General Information: Bush for control arm
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
both sides, Lower, Rear - Control/Trailing Arm Type: Control Arm
- Required quantity: 2
- Height [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12.1
- Mounting Type: Hydro Mount
- Weight [kg]: 0.6
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Width [mm]: 80
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
- Construction Year from: 06.1996
- Construction Year to: 08.2001
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 773
- Manufacturer: GATES
- Laagritüüp: Hüdrolaager
- Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, sees, taga - Välisläbimõõt [mm]: 65
- Siseläbimõõt [mm]: 12
- Pikkus (mm): 80
-
Kaal (kg): 0,
528 - Manufacturer: RTS SA
- Mounting Type: Hydro Mount
-
Fitting Position: both sides,
Rear, Lower Front Axle - Control/Trailing Arm Type: for control arm
- Axle alignment required after fitting:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- HD - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
-
Fitting Position: outer,
Upper, Rear Axle Right, Rear Axle Left - Height [mm]: 55
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A80/ A4 QUATTRO - Manufacturer: MEY
-
Engine Code: ALG,
ACK -
Vehicle Identification Number (VIN) from: 8D-
V- 160 001 -
Vehicle Identification Number (VIN) to: 8D-
V- 400 000 - Block Separation:
- Manufacturer: JP GROUP
-
Lisainfo: Bolts,
nuts and washer for JP item no. 1140100210 -
Additional information: Bolts,
nuts and washer for JP item no. 1140100210
-
Engine Code: AHA,
ALG, ACK - Vehicle Identification Number (VIN) to: ******8D*W*104628
- old version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.521
- for OE number: 4D0 407 183 P
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.486
- for OE number: 4D0 407 183 AC
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 55
-
Material: Rubber/
Metal - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: both sides,
Rear Axle - Axle alignment required after fitting:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AHA,
ALG, ACK - Vehicle Identification Number (VIN) to: ******8D*W*104628
- old version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.483
- Observe service information:
- Name: SW 30 60 0016
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.484
- Observe service information:
- Name: SW 30 60 0041
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Hydro Mount
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Length [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Quantity per axle: 2
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Mounting Type: Hydro Mount
- Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
- Width [mm]: 80
- Quantity per axle: 2
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- DOLNEGO - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- General Information: Bush kit for control arm; 12 pcs
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with coupling rod
- Steering: with tie rod ends
-
Fabrication Number: ZWD-
VW- 000 - Manufacturer: NTY
-
Name: NTY ZWD-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks