Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 97
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 27
-
Lisainfo: Bellow Set,
drive shaft -
Additional information: Bellow Set,
drive shaft
Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided
- Engine Code: AQD
-
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
-
Fitting Position: Front Axle,
Wheel Side - Quantity per axle: 2
- Bellows Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 91
- Height [mm]: 88
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 701498203
- Fitting Position: Wheel Side
- Material: Rubber
- Weight [g]: 114
- Length [mm]: 90
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 90
- Name: IM 30740
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Front Axle,
Wheel Side - Outer Diameter [mm]: 23
- for shaft diameter [mm]: 84
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
013 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Length [mm]: 84
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 82
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: transmission sided
- Length [mm]: 111
-
Supplementary Article/Info 2: with top,
with clamps - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 100
-
Fabrication Number: NOP-
008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 80
- Height [mm]: 84
- for OE number: GDG158
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8312
- Additional information: D8312
- Lisainfo: D8312
- Engine Code: AQD
-
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
- Bellows Material: Rubber
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 80
- Height [mm]: 84
- Manufacturer: TOPRAN HANS PRIES
Fitting Position: Front Axle Left, Front Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 81
- Height [mm]: 130
- Version: UNIVERSAL BOOT KIT
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8000E
- Additional information: D8000E
- Lisainfo: D8000E
- Fitting Position: Wheel Side
- Length [mm]: 92
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 92
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
055 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 84
- Height [mm]: 115
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8282T
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 91
- Height [mm]: 88
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8132
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 83
- Height [mm]: 75
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8373
-
Installatsiooni pool: Esisild,
Tagasild - Piirangutega toode/piirangu info 2: koos kammitsatega
-
Seerianumber: NOP-
144 -
tootekoodile: NPW-
CH- 006, NPW- VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AQD
-
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 90
- Height [mm]: 90
- Bellows Material: Rubber
- Quantity per axle: 2
- for OE number: 701 498 203S
- Slim Set:
- Components deviate from OE:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Outer Diameter [mm]: 24
- for shaft diameter [mm]: 91
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
023 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: ALG,
ACK -
Fitting Position: transmission sided,
Front Axle - Pikkus (mm): 83
- Siseläbimõõt 1 [mm]: 21
- Siseläbimõõt 2 (mm): 80
- Manufacturer: JPN
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Length [mm]: 90
- Inner Diameter 1 [mm]: 84
- Inner Diameter 2 [mm]: 23
-
Material: Polychloroprene
(Neoprene) - Manufacturer: JP GROUP
-
Lisainfo: Axle boot kit,
front, outer -
Additional information: Axle boot kit,
front, outer
- for OE number: A9913370085
- Fitting Position: transmission sided
- Material: Rubber
- Weight [g]: 170
- Length [mm]: 120
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Name: IM 30663
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Version: One
- Length [mm]: 96.5
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 27
- Manufacturer: GSP
Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided
- Transmission Type: Manual Transmission
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Length [mm]: 90
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 84
- Inner Diameter 2 [mm]: 23
- Manufacturer: GSP
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 94
- Height [mm]: 99
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8150
-
Fitting Position: transmission sided,
Front Axle - Material: Rubber
- Weight [g]: 236
- Clip manufacturer: OETIKER
- Length [mm]: 84
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 80
- Name: IM 33785
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 99
- Height [mm]: 90
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8033
- Fitting Position: Wheel Side
- Height [mm]: 103
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 85
- Name: SN OBK54.019
- Manufacturer: SNR
-
Engine Code: ALG,
ACK -
Fitting Position: transmission sided,
Front Axle - Length [mm]: 83
- Material: Rubber
- Supplementary Article/Supplementary Info: with grease
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 21
- Weight [kg]: 0.071
- Inner Diameter 2 [mm]: 80
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 38331 FEBI
- Additional information: 38331 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 701498203
- Fitting Position: Wheel Side
- Material: Rubber
- Weight [g]: 284
- Clip manufacturer: OETIKER
- Length [mm]: 90
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 90
- Name: IM 30537
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 99
- Height [mm]: 120
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8077
- Height [mm]: 110
- Weight [kg]: 0.38
- Material: Rubber
- Weight [g]: 380
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 100
- Manufacturer: METALCAUCHO
Fitting Position: transmission sided, Rear Axle both sides, Front Axle both sides
-
Production date from: 04/
96 - Fitting Position: Wheel Side
- for OE number: 3B0498203F
- Manufacturer: SASIC
-
Vehicle Identification Number (VIN): [3B-
WE394609;] - Parameter: Circular boots
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 78
- Height [mm]: 92
- Name: SN IBK54.009
- Manufacturer: SNR
Fitting Position: transmission sided, Front Axle Left, Front Axle Right
-
Engine Code: AMX,
APR, ALG, ACK, AQD - Length [mm]: 130
- Inner Diameter [mm]: 62
-
Outer Diameter [mm]: 94,
86, 78, 66, 38, 32, 28, 24 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.27
- Inner Diameter 3 [mm]: 74
- Supplementary Article/Info 2: with clamps
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: transmission sided,
Rear Axle, Front Axle - Height [mm]: 110
- Weight [kg]: 0.38
- Weight [g]: 380
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 100
- Manufacturer: METALCAUCHO
-
Fitting Position: Wheel Side,
Front Axle Right, Front Axle Left - Inner Diameter 2 [mm]: 77
- Height [mm]: 132
- Name: SN OBK10.001
- Manufacturer: SNR
-
Vehicle Identification Number (VIN): [3B-
WE394609;] - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 88.5
- Height [mm]: 88
- Fitting Position: Wheel Side
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN OBK54.003
- Fitting Position: transmission sided
- Height [mm]: 115
- Weight [kg]: 0.476
- Weight [g]: 476
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 107
- Manufacturer: METALCAUCHO
- Transmission Type: Manual Transmission
- Length [mm]: 106
- Inner Diameter 1 [mm]: 57
- Inner Diameter 2 [mm]: 25
-
Material: Polychloroprene
(Neoprene) -
Manufacturer: JP GROUP A/
S -
Lisainfo: Axle boot kit,
manual gear -
Additional information: Axle boot kit,
manual gear
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Transmission Type: Manual Transmission
- Length [mm]: 93
-
Material: Polychloroprene
(Neoprene) - for OE number: 191498201
- Inner Diameter 1 [mm]: 52.9
- Inner Diameter 2 [mm]: 21
- Manufacturer: GSP
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right
-
Vehicle Identification Number (VIN): [;8C-
R- 061858] - Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 56.5
- Height [mm]: 106
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN IBK54.006
Fitting Position: transmission sided, Front Axle Left, Front Axle Right
- for OE number: A9913370085S1
-
Fitting Position: transmission sided,
Front Axle - Material: Rubber
- Weight [g]: 357
- Length [mm]: 120
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Name: IM 33644
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Length [mm]: 92
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 78
-
Supplementary Article/Info 2: with clamps,
with retaining ring -
Material: Polychloroprene
(Neoprene) - Manufacturer: METZGER
Fitting Position: transmission sided, Front Axle Left, Front Axle Right
-
Vehicle Identification Number (VIN): [3B-
WE394609;] - Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 88.5
- Height [mm]: 88
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN OBK54.008
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 146
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 86
- Manufacturer: SKF
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Transmission Type: Manual Transmission
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 82
- Height [mm]: 84
- Thread Size: M16x1.5x77
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Info 2: with screw
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 118
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 80
- General Information: Rubber as alternative
- Manufacturer: SKF
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Height [mm]: 110
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8294T
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 82
- Height [mm]: 88
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
- Height [mm]: 97
- Name: SN OBK10.005
- Manufacturer: SNR
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Height [mm]: 120
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8076
-
Fitting Position: Wheel Side,
Front Axle - Height [mm]: 146
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 86
- Name: SK VKJP01001S
- Manufacturer: SKF
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 from [mm]: 25
- Inner Diameter 1 to [mm]: 30
- Inner Diameter 2 from [mm]: 84
- Inner Diameter 2 to [mm]: 96
- Height [mm]: 105
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: GKN LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Fitting Position: Front Axle
- Weight [kg]: 0.071
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 80
- Length [mm]: 83
- Material: Rubber
- General Information: Dust cover for inner joint
- Manufacturer: VIKA
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 52.9
- Height [mm]: 93
-
Manufacturer: SNR /
NTN- SNR/
Fitting Position: transmission sided, Front Axle Left, Front Axle Right
-
Engine Code: ACK,
ALG, AMX, AQD, APR -
Fitting Position: Rear Axle,
Wheel Side - Height [mm]: 98
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 82
- Manufacturer: SKF
- Fitting Position: Wheel Side
- Length [mm]: 112
-
Material: TPE
(thermoplastic elastomer) - Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 87
- Manufacturer: METALCAUCHO
- Model Year to: 1999
- Fitting Position: transmission sided
- Length [mm]: 122
-
Material: NBR
(nitrile butadiene rubber) - Joint Type: CV Joint
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Manufacturer: FEBEST
- Transmission Type: Manual Transmission
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 100
- Height [mm]: 111
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 8.7
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 86
-
Bellows Material: Rubber/
Metal - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Wheel Side,
Front Axle - Height [mm]: 90
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 90
- Manufacturer: SKF
- Name: SK VKJP3005
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Transmission Type: Manual Transmission
- Length [mm]: 88
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 89
-
Supplementary Article/Info 2: with screw,
with retaining ring, with nut -
Thread Size: M16 x 1,
5 -
Material: Polychloroprene
(Neoprene) - Manufacturer: METZGER
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter 1 from [mm]: 22
- Inner Diameter 1 to [mm]: 29
- Inner Diameter 2 from [mm]: 72
- Inner Diameter 2 to [mm]: 84
- Height [mm]: 97
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
- Manufacturer: SKF
- Name: SK VKJP01013
- Fitting Position: transmission sided
- General Information: Dust cover for inner joint
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Height [mm]: 115
- Material: Thermoplast
- Name: SE D8571T
- Manufacturer: AUTOFREN SEINSA
-
Fitting Position: transmission sided,
Rear Axle - Length [mm]: 120
- Material: Rubber
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 100
- Weight [kg]: 0.45
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ACK
- old version:
- Length [mm]: 82
- Material: Rubber
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 83
- Weight [kg]: 0.531
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 112
- Material: Thermoplast
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 87
- Manufacturer: SKF
- Name: SK VKJP3037
-
Engine Code: AMX,
APR, ALG, ACK, AQD -
Fitting Position: transmission sided,
Rear Axle - Pikkus (mm): 116
- Siseläbimõõt 1 [mm]: 27
- Siseläbimõõt 2 (mm): 100
- Manufacturer: JPN
-
Production date from: 05/
97 - Fitting Position: transmission sided
- Material: Thermoplast
- for OE number: 1K0498201
- Manufacturer: SASIC
- Fitting Position: transmission sided
- Material: PVC
- Manufacturer: FEBEST
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 115
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 100
- Manufacturer: SKF
- Vehicle Identification Number (VIN) from: 8DX199999
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 100
- Height [mm]: 118
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 8.6
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 86
-
Bellows Material: Rubber/
Metal - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Production date from: 02/
99 - Fitting Position: Wheel Side
- Material: Thermoplast
- for OE number: 3B0498203G
- Manufacturer: SASIC
-
Engine Code: ACK,
ALG, AMX, APR, AQD -
Fitting Position: Rear Axle,
transmission sided - Height [mm]: 120
- Number of Holes: 6
- Joint Type: Flexible Joint Disc
- Inner Diameter 1 [mm]: 36
- Inner Diameter 2 [mm]: 100
- Manufacturer: SKF
- Name: SK VKJP6004
-
Engine Code: AMX,
APR, ALG, ACK, AQD -
Fitting Position: transmission sided,
Rear Axle - Length [mm]: 116
- Material: Rubber
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Weight [kg]: 0.127
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Manual Transmission
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 100
- Height [mm]: 118
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 8.6
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 86
-
Bellows Material: Rubber/
Metal - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Engine Code: ACK,
ALG, AMX, APR, AQD -
Fitting Position: Rear Axle,
transmission sided, Front Axle - Height [mm]: 120
- Inner Diameter 1 [mm]: 36
- Inner Diameter 2 [mm]: 100
- Length [mm]: 120
- Slim Set:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AMX,
APR, ALG, ACK, AQD -
Fitting Position: transmission sided,
Rear Axle - Length [mm]: 116
- Material: Rubber
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Observe service information:
- Name: SW 30 93 8365
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AMX,
APR, ALG, ACK, AQD -
Outer Diameter [mm]: 27,
75, 92, 100, 108, 116 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 151
- Weight [kg]: 0.23
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Rubber
- for OE number: 443 498 201 B
-
Fitting Position: transmission sided,
Rear Axle, Front Axle - Full Set:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Height [mm]: 110
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 8.6
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 86
- only in connection with: N90587602
- for OE number: 1K0498201
- Thread Size: M20x1.5
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Inner Diameter 2 [mm]: 77
- Height [mm]: 132
- Quantity: 12
-
Fitting Position: Wheel Side,
Front Axle Right, Front Axle Left - Name: SN OBK10.003
- Manufacturer: SNR
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks