Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: AEB,
ANB, APU, ARK - Fitting Position: frontal sided
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
- Width [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: frontal sided
- Engine Code: AWT
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
- Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10 -
Additional information: Oil seal,
35x48x10
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
-
Engine Code: AEB,
ARK, ANB, APU - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Thickness [mm]: 11
-
Lisainfo: Oil seal for crankshaft,
85x105x11 mm -
Additional information: Oil seal for crankshaft,
85x105x11 mm
- Engine Code: AWT
- Fitting Position: transmission sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Manufacturer: JP GROUP
-
Lisainfo: Seal flange for crankshaft,
rear -
Additional information: Seal flange for crankshaft,
rear
-
Engine Code: AEB,
ARK - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Width 1 [mm]: 9
- Width 2 [mm]: 11
- Housing Type: with housing
- Lisainfo: Seal flange for crankshaft
- Additional information: Seal flange for crankshaft
- Fitting Position: frontal sided
- for manufacturer number: 8707050
- Manufacturer: KAMOKA
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Fabrication Number: NUP-
VW- 012 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 1
- Fitting Position: frontal sided
-
Engine Code: AEB,
ARK - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 413009310
- Engine Code: AEB
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- General Information: Oil seal for camshaft; 47*10*32
- Manufacturer: VIKA
- Fitting Position: frontal sided
- for manufacturer number: 8707030
- Manufacturer: KAMOKA
- Fitting Position: frontal sided
- Engine Code: AEB
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Construction Year from: 06.2000
- Engine Code: AWT
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Manufacturer: BGA
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AWT,
APU, ANB, ARK, AEB - Fitting Position: frontal sided
- Construction Year from: 02.1999
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Dust Cover: with dust lip
- Manufacturer: TOPRAN
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AWT,
APU, ANB, ARK, AEB - Fitting Position: frontal sided
- Construction Year from: 02.1999
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Block Separation:
-
Engine Code: ATW,
AEB, ANB - Construction Year from: 01.1999
- Engine Number from: 8DX200001
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Engine Code: AWT
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: ASW
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01969
- Fitting Position: frontal sided
- for manufacturer number: 8707007
- Manufacturer: KAMOKA
- Construction Year from: 01.1999
- Engine Code: AEB
- Fitting Position: transmission sided
- Height [mm]: 12
- Outer Diameter [mm]: 105
- Inner Diameter [mm]: 85
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA
- Fitting Position: frontal sided
- Construction Year from: 07.1998
- Construction Year to: 07.1999
- Engine Code: ARK
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Fitting Position: frontal sided
- General Information: Oil seal for crankshaft; front
- Manufacturer: BORSEHUNG
- Fitting Position: frontal sided
-
Engine Code: ANB,
APU - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Additional information: 81-
34367- 00 REIN -
Lisainfo: 81-
34367- 00 REIN
- Fitting Position: frontal sided
-
Engine Code: AEB,
ANB, ARK, APU, ATW - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELR
- Additional information: 129.780 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: ANB,
APU, ARK - Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
- Engine Code: AWT
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
-
Engine Code: ATW,
AEB, ARK - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 11
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist - Height 1 [mm]: 9
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Lisainfo: 81-
23708- 40 -
Additional information: 81-
23708- 40
- Construction Year from: 06.2000
- Engine Code: AWT
- Fitting Position: frontal sided
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Engine Code: AWT
- Construction Year from: 06.2000
- Engine Number to: 8NY007500
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Fitting Position: frontal sided
- Construction Year from: 07.1998
- Construction Year to: 07.1999
- Engine Code: ARK
- Height [mm]: 10
- Outer Diameter [mm]: 48
- Inner Diameter [mm]: 35
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 034115147A
- Manufacturer: FAI
-
Engine Code: ANB,
AWT, APU - Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ARK,
AEB, APU, ANB - Thickness [mm]: 11
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
-
Material: FPM
(fluoride rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.058
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: frontal sided
- Engine Code: AWT
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- Engine Code: AWT
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 155.560 ELR
- Additional information: 155.560 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Engine Code: AWT
- Fitting Position: frontal sided
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Housing Type: with housing
- Housing material: Cast Aluminium
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: transmission sided,
Rear - Engine Code: AWT
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MAX
- Supplementary Article/Info 2: with flange
- Fitting Position: transmission sided
-
Fabrication Number: NUP-
VW- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: transmission sided
- Engine Code: AWT
- Construction Year from: 06.2000
- Engine Number from: 8NY007501
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Required quantity: 1
-
Engine Code: ARK,
ANB, AEB, APU - Quantity per packing unit: 5
- Fitting Position: transmission sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: transmission sided
- Block Separation:
-
Engine Code: AEB,
ANB - Construction Year from: 01.1999
- Engine Number from: 8DX200001
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 12
- Manufacturer: AJUSA
- Fitting Position: transmission sided
- Housing Type: with housing
- Housing material: Cast Aluminium
- Alternative Repair Kit: 101 407
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: transmission sided,
Rear -
Engine Code: ATW,
ARK, ANB, APU - Block Separation:
- Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MAX
- Fitting Position: transmission sided
-
Fabrication Number: NUP-
VW- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: AEB,
ARK - Fitting Position: transmission sided
- Supplementary Article/Info 2: with flange
- Outer Diameter [mm]: 111
- Inner Diameter [mm]: 85
- Height [mm]: 16
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: transmission sided
- Construction Year from: 07.1998
- Construction Year to: 07.1999
- Engine Code: ARK
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103171
- Manufacturer: FAI
- Fitting Position: Pulley side
-
Name: Volli rongastihendikomplekt,
Mootor - Manufacturer: COT
- Fitting Position: transmission sided
- Weight [kg]: 0.16
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: PTFE
(polytetrafluoroethylene) - Required quantity: 1
- Supplementary Article/Info 2: with flange
- Thickness [mm]: 15.7
- General Information: Oil sealing flange for crankshaft; rear
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: Oil sealing flange for crankshaft; rear
- Manufacturer: VIKA
- Required quantity: 1
- Fitting Position: frontal sided
-
Engine Code: ANB,
APU - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Fitting Position: Pulley side
-
Name: VOLLI RONGASTIHENDIKOMPLEKT,
MOOTOR - Manufacturer: COT
- Additional information: 289077
- Lisainfo: 289077
-
Engine Code: AEB,
ANB, APU, ARK - Quantity per packing unit: 5
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: ARK,
ANB, APU, ATW, AEB - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: SP
- Housing Type: with housing
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Fitting Position: frontal sided
- Engine Code: APU
- Construction Year from: 08.1998
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Engine Code: AWT
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Housing Type: with housing
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Construction Year from: 06.2000
- Engine Code: AWT
- Fitting Position: transmission sided
- Height [mm]: 16
- Outer Diameter [mm]: 155
- Inner Diameter [mm]: 131
- Housing Type: with housing
- Manufacturer: BGA
- Engine Code: AWT
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Manufacturer: VIKA
General Information: Oil sealing flange for crankshaft; rear; with aluminium frame
- Fitting Position: transmission sided
- for manufacturer number: 8707013
- Manufacturer: KAMOKA
- Fitting Position: transmission sided
- for manufacturer number: 8707009
- Manufacturer: KAMOKA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AWT
- Thickness [mm]: 15.7
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: PTFE
(polytetrafluoroethylene) - Fitting Position: transmission sided
- Weight [kg]: 0.16
- Supplementary Article/Info 2: with flange
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ANB,
AEB, APU - Inner Diameter [mm]: 85
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Supplementary Article/Info 2: with flange
- Manufacturer: FEBI BILSTEIN
- Additional information: FE37745
- Lisainfo: FE37745
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: Oil sealing flange for crankshaft; rear
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Engine Code: ATW
- Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
-
Engine Code: AEB,
ANB, APU, ARK, ATW - Inner Diameter [mm]: 85
- Radial Shaft Seal Design: SP
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 804.850 ELR
- Additional information: 804.850 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: AEB,
ANB, APU, ARK - Fitting Position: transmission sided
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 15.7
- Outer Diameter 1 [mm]: 131
- Outer Diameter 2 [mm]: 152
- Inner Diameter 1 [mm]: 85
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 028103171B
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Engine Code: AWT
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
- Engine Code: AWT
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Observe mounting information:
- Supplementary Article/Info 2: with mounting sleeve
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Engine Code: AWT
- Fitting Position: transmission sided
- Outer Diameter 1 [mm]: 131
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103171B
- Height 1 [mm]: 15.7
-
Supplementary Article/Info 2: with flange,
with mounting sleeve - Outer Diameter 2 [mm]: 152
- Inner Diameter 1 [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Engine Code: APU
- Construction Year from: 08.1998
- Engine Number from: 4BW131642
- Housing Type: with housing
- Height [mm]: 16.5
- Inner Diameter [mm]: 130
- Outer Diameter [mm]: 152
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Fitting Position: transmission sided
- General Information: Oil sealing flange for crankshaft; rear
- Manufacturer: BORSEHUNG
- Fitting Position: transmission sided
- Engine Code: AWT
- Construction Year from: 06.2000
- Housing Type: with housing
- Inner Diameter [mm]: 131
- Outer Diameter [mm]: 152
- Height [mm]: 16
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - for OE number: 06A103171A
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks