• for OE number: 026 121 005 F
• Water Pump Type: for V-ribbed belt use
• Manufacturer: KAMOKA

• Number of Teeth: 23
• Pulleys: with belt pulley
• Manufacturer: DENCKERMANN POMPY

• Engine Code: AWT
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
PASSAT (B5.5)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
PASSAT (B5.5)
(kvaliteediklass: PJ)"

• Engine Code: AWT
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: BGA

• Housing Type: without housing
• Operating Mode: Mechanical
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
A4 SDN + AVANT (B5)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A4 SDN + AVANT (B5)
(kvaliteediklass: PJ)"

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Fabrication Number: CPW-VW-027
• Manufacturer: NTY

• Water Pump Type: for v-belt use
• Operating Mode: Mechanical
• Name: VEEPUMP
• Manufacturer: MAX

• for OE number: 06A 121 011 E
• Number of Teeth: 23
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Weight [kg]: 1.659
• Required quantity: 1
• General Information: water pump
• Manufacturer: VIKA

Manufacturer: JPN

Manufacturer: JPN

• Engine Code: AWT
• Operating Mode: Mechanical
• Number of Teeth: 23
• Name: VEEPUMP
• Manufacturer: MAX

• Overall Height [mm]: 111.5
• Manufacturer: ASHIKA

• Housing Type: without housing
• Rakendustüüp: mehhaaniliselt
• Piirangutega toode/piirangu info: koos tihendiga
• Wasserpumpenausführung: jaoks polikliinik-rihmülekandega
• Manufacturer: DRIVE

• Overall Height [mm]: 111.5
• Manufacturer: JAPKO

• Pulleys: with belt pulley
• Number of Teeth: 23
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.66
• Manufacturer: AKSDASIS

• Engine Code: AWT
• Rakendustüüp: mehhaaniliselt
• Wasserpumpenausführung: jaoks sõrme-rihmülekandega
• Manufacturer: DRIVE

• Housing Type: without housing
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal, do not use sealant
• Number of blades/vanes: 7
• Impeller Diameter [mm]: 63.5
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• Engine Code: AWT
• Number of Teeth: 23
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 57.264
• Impeller Diameter [mm]: 60
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• New Part:
• Vehicle Identification Number (VIN) from: 8D-X-015001
• Engine Code: AEB,ANB,APU,ARK
• Vehicle Identification Number (VIN) to: 8D-X-015000
• Housing Type: without housing
• for OE number: 026121005F
• Weight [kg]: 0.96
• Manufacturer: DOLZ
• Name: DO A183

• Engine Code: AWT
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• for OE number: 06A 121 012 GX
• Supplementary Article/Info 2: with seal ring
• Manufacturer: PIERBURG

• Engine Code: AEB, ARK, ANB, APU
• Water Pump Type: for v-belt use
• Operating Mode: Mechanical
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538035310
• Additional information: 538035310

• Engine Code: AEB, ARK, ANB, APU, AWT, ATW
• Vehicle Identification Number (VIN) from: 8D-X-015001
• Vehicle Identification Number (VIN) to: 8D-X-015000
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1192

• Construction Year from: 06.2000
• Construction Year to: 10.2000
• Engine Code: AEB, ARK, ANB, APU, AWT, ATW
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1165

• Engine Code: ARK, AEB, APU, ANB
• Water pump impeller material: Plastic
• Seal Material: Paper
• Material: Cast Aluminium
• Number of blades/vanes: 7
• Weight [kg]: 0.818
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: Water pump; aluminum impeller
• Manufacturer: VIKA

• Fabrication Number: CPW-VW-037
• Manufacturer: NTY

• Engine Code: ARK, AEB, APU, ANB
• Water pump impeller material: Plastic
• Seal Material: Paper
• Material: Cast Aluminium
• Number of blades/vanes: 7
• Weight [kg]: 0.818
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 15 0022
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.925
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Housing Type: without housing
• Manufacturer: CONTITECH-POMPY WODY

• Engine Code: AEB, ARK, ANB, APU, AWT, ATW
• Manufacturer: MAGNETI MARELLI

• Engine Code: AWT
• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 23
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Engine Code: AWT
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 23
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF

• Housing Type: without housing
• Packaging length [cm]: 17.7
• Packaging width [cm]: 15.8
• Packaging height [cm]: 14.2
• Weight [kg]: 0.862
• Manufacturer: AKSDASIS

• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: SKF
• Name: SK VKPC81402

• Engine Code: AWT
• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 8
• Weight [kg]: 0.688
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AWT
• Water Pump Type: for timing belt drive
• Operating Mode: Mechanical
• Number of Teeth: 23
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Engine Code: AEB, ARK, ANB, APU
• Operating Mode: Mechanical
• Housing Type: with housing
• Name: VEEPUMP
• Manufacturer: MAX

• Engine Code: AWT
• Weight [kg]: 0.76
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTITECH

• Engine Code: AWT
• Length [mm]: 102
• Water pump impeller material: Plastic
• Housing Type: without housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter 1 [mm]: 97
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Diameter 2 [mm]: 94
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Mechanical
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Engine Code: AWT
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 23
• Impeller Diameter [mm]: 60
• Water pump impeller material: Metal
• Manufacturer: HEPU

• Construction Year to: 10.2000
• Engine Code: AEB,ANB,APU,ARK
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: with housing
• Water pump impeller material: Plastic
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AEB, ANB, APU, ARK
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: single-part housing
• Water pump impeller material: Metal
• Manufacturer: HEPU
• Lisainfo: P518
• Additional information: P518

• Engine Code: AEB, ANB, APU, ARK
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: with housing
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Engine Code: AWT
• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 23
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Engine Code: AEB, ANB, APU, ARK
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Manufacturer: MEYLE

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Supplementary Article/Info 2: without lid
• Weight [kg]: 1.04
• Name: AI 1599
• Manufacturer: AIRTEX

• Housing Type: with housing
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with lid, with seal ring
• Number of blades/vanes: 7
• Impeller Diameter [mm]: 63.5
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• New Part:
• Vehicle Identification Number (VIN) from: 8D-X-015001
• Engine Code: AEB,ANB,APU,ARK
• Vehicle Identification Number (VIN) to: 8D-X-015000
• Housing Type: with housing
• Weight [kg]: 1.61
• Manufacturer: DOLZ
• Name: DO A184

• Engine Code: ARK, AEB, APU, ANB
• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 7
• Weight [kg]: 1.481
• Supplementary Article/Supplementary Info: with gaskets/seals
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: APU, AEB, ARK, ANB
• Water Pump Type: for V-ribbed belt use
• Number of bolts/screws: 8
• Water pump impeller material: Plastic
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: VEEPUMP
• Manufacturer: SKF

• Engine Code: AEB, ARK, ANB, APU
• Water Pump Type: for V-ribbed belt use
• Operating Mode: Mechanical
• Housing Type: with housing
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Supplementary Article/Info 2: with lid
• Weight [kg]: 2.05
• Name: AI 1608
• Manufacturer: AIRTEX

• Construction Year to: 10.2000
• Engine Code: AEB,ANB,APU,ARK
• Pulleys: without belt pulley
• Supplementary Article/Info 2: with lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 1.877
• Manufacturer: VALEO

• Housing Type: with housing
• Weight [kg]: 1.54
• Manufacturer: AKSDASIS

• Engine Code: AWT
• Number of Teeth: 150
• Weight [kg]: 1.86
• for OE number: 06B 198 119 A S1
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 150
• Width [mm]: 23
• Number of belts: 1
• Weight [kg]: 2.59
• for article number: A186
• Manufacturer: DOLZ
• Name: DO KD110

• Engine Code: AWT
• Construction Year from: 06.2000
• Construction Year to: 07.2000
• Vehicle Identification Number (VIN) to: 8D..1..042 384
• Length [mm]: 1,200
• Number of Teeth: 150
• Width [mm]: 23
• Tooth Pitch [mm]: 8
• Pulleys contained: 2
• Supplementary Article/Info 2: without tensioner element
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Engine Code: AWT
• Construction Year from: 08.2000
• Construction Year to: 10.2000
• Vehicle Identification Number (VIN) from: 8D..1..042 385
• Length [mm]: 1,200
• Number of Teeth: 150
• Width [mm]: 23
• Tooth Pitch [mm]: 8
• Pulleys contained: 2
• Supplementary Article/Info 2: without tensioner element
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Engine Code: APU
• Supplementary Article/Supplementary Info: with water pump, with coolant
• Number of belts: 1
• Supplementary Article/Info 2: with fastening material
• Pulleys contained: 1
• Operating Mode: Mechanical
• Number of Teeth: 138
• Width [mm]: 23
• Manufacturer: VAICO
• Additional information: V10-50106 VEMO
• Lisainfo: V10-50106 VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with tensioner pulley damper
• Engine Code: AWT
• Vehicle Identification Number (VIN) to: 8D1042384
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Manufacturer: METELLI ROZRZAD

• Engine Code: AEB, ARK, ANB, APU, AWT, ATW
• Vehicle Identification Number (VIN) to: 8D-1-042 384
• Length [mm]: 1,020
• Manufacturer: MAGNETI MARELLI
• Name: MM MTKQ025P

• Engine Code: AWT
• Vehicle Identification Number (VIN) to: ******8D*1*042384
• Water pump impeller material: Plastic
• Number of Teeth: 150
• Supplementary Article/Info 2: with tensioner element
• Belts: with rounded tooth profile
• Weight [kg]: 1.97
• Units/Pulleys: incl. tensioner pulley
• for OE number: 06B 109 119 A S8
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8D-1-042 385
• Engine Code: AWT
• Water pump impeller material: Plastic
• Belt Width [mm]: 23
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC01170-1

• Engine Code: AWT
• Construction Year from: 06.2000
• Construction Year to: 07.2000
• Vehicle Identification Number (VIN) to: 8D..1..042 384
• Length [mm]: 1,200
• Number of Teeth: 150
• Width [mm]: 23
• Tooth Pitch [mm]: 8
• Pulleys contained: 2
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Engine Code: AWT
• Construction Year from: 08.2000
• Construction Year to: 10.2000
• Vehicle Identification Number (VIN) from: 8D..1..042 385
• Length [mm]: 1,200
• Number of Teeth: 150
• Width [mm]: 23
• Tooth Pitch [mm]: 8
• Pulleys contained: 2
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: Veepump hammasrihmakomplekt
• Manufacturer: BOS