• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-AU-009
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Manufacturer: NTY

• Version: Two
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Automatic Transmission, Manual Transmission
• Length [mm]: 97.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Thread Size: M16X1,5
• Length [mm]: 98
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Lubrication: with grease lubrication
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bellow
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-04-002
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Wheel Side
• Length [mm]: 98
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Braking/Driving Dynamics: for vehicles with ABS
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16 x 1,5
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) to: 8D...W...109 971
• Transmission Type: 5-Speed Automatic Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Thread Size: M16x1,5
• Length [mm]: 97
• Diameter 1 [mm]: 98
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Sealing Ring Diameter [mm]: 60
• ABS-Ring Diameter [mm]: 81
• Number of Teeth, ABS ring: 45
• Manufacturer: BGA

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 99.5
• Sealing Ring Diameter [mm]: 59
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Manufacturer: LPR

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 8D...X...200001
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 59.6
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Length [mm]: 97.5
• Fitting Position: Wheel Side
• Specification: Groove type: OUTER
• Manufacturer: JAPKO

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Lubrication: with grease lubrication
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: DELLO AUTOMEGA

• Internal Toothing differential side, conn. to transmission: 28
• Length from [mm]: 32
• Quality class: PJ
• Name: Inner CV-joint

Fitting Position: transmission sided, Front Axle Right, Front Axle Left

• Fitting Position: Front Axle
• Length [mm]: 97.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0026

• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Bellows Material: NBR (nitrile butadiene rubber)
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Wheel Side, Front Axle
• Engine Code: AJL
• Transmission Type: Fully Automatic
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Joint Diameter [mm]: 108
• Length [mm]: 32
• Internal Toothing differential side, conn. to conn. shaft: 28
• Manufacturer: DENCKERMANN ZAWIESZENIE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 97
• Thread Size: M16x1.5x77
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 98
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Quantity per axle: 2
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Wheel Side
• Braking/Driving Dynamics: for vehicles with ABS
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Additional information: 15-1267MET
• Lisainfo: 15-1267MET

• Vehicle Identification Number (VIN) to: ******8D*W*109971
• Transmission Type: 5-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with grease
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.38
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Manufacturer: FEBI
• Lisainfo: 33224 FEBI
• Additional information: 33224 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: MAGNETI MARELLI

• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) to: 8D-W-109971
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 87.9
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Quantity per axle: 2
• for OE number: 8D0 498 099B
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Wheel Side, Front Axle
• Engine Code: AJL
• Transmission Type: Manual Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Engine Code: AJL
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 97.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Quantity: 2
• Vehicle Identification Number (VIN) to: 8D-W-109 971
• Fitting Position: Front Axle
• Length [mm]: 90
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Manufacturer: VIKA

General Information: Outer joint; Inner tooth30mm; outer tooth33mm; total length89.5mm

• Model Year from: 1998
• Model Year to: 1999
• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to transmission: 34
• Sealing Ring Diameter [mm]: 114
• Outer Diameter [mm]: 90
• Joint Type: Tripod Joint
• Name: Liigendlaager, veovoll
• Manufacturer: MAX

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 8D...W...109 972
• Transmission Type: 5-Speed Automatic Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: transmission sided
• Transmission Type: Manual Transmission
• Internal Toothing wheel side: 28
• General Information: Inner joint; MT; Inner tooth28mm
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with rubber mount
• Sealing Ring Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 97.5
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.001

• Quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 98
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: VIKA

General Information: Outer joint; Inner tooth27mm; outer tooth38mm; total length97.5mm

• Quantity: 2
• Vehicle Identification Number (VIN) from: 8D-W-109 972
• Fitting Position: Front Axle
• Length [mm]: 90
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Manufacturer: VIKA

General Information: Outer joint; Inner tooth30mm; outer tooth33mm; total length89.5mm

• Supplementary Article/Info 2: with rubber mount
• Sealing Ring Diameter [mm]: 53
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Length 2 [mm]: 92
• Internal Toothing wheel side: 30
• Number of pins: 45
• Version: 6 balls
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Name: SN OJK54.010
• Manufacturer: SNR

• Model Year from: 1998
• Model Year to: 1999
• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN): [;8C-R-061858]
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.011

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Engine Code: AJL
• Transmission Type: Fully Automatic
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Engine Code: AJL
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJL
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• ABS-Ring Diameter [mm]: 81
• Sealing Ring Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 97
• Thread Size: M16x1.5x77
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Thread Size: M10x1.5x48
• Bore Diameter [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

Fitting Position: transmission sided, Front Axle Left, Front Axle Right Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.