Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Length [mm]: 390
- Brake System: TRW
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Sensor,
brake pad wear -
Additional information: Sensor,
brake pad wear
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Component Number: G17
- Manufacturer: TOPRAN
Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for brake disc diameter [mm]: 318,
338 - Fitting Position: Front Axle
- Length [mm]: 283
- Brake System: ATE
-
Lisainfo: Sensor,
brake pad wear -
Additional information: Sensor,
brake pad wear
- Number of pins: 2
- Connector Shape: D Shape
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: Coolant temperature sensor; black
- Manufacturer: VIKA
-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 3
- Number of connectors: 2
- Manufacturer: 3RG
- General Information: Exterior temperature sensor
- Manufacturer: VIKA
- Weight [g]: 15
- Name: IM 5309
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Surface: primed
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: both sides,
Rear, inner, Front, outer, Centre -
Fabrication Number: EPDC-
AU- 016 - Manufacturer: NTY
-
Name: NTY EPDC-
AU- 016
- Number of connectors: 2
- Colour: black
- Fitting Position: Front
- Weight [kg]: 0.004
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Coolant temperature sensor
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles with automatic climate control
-
Vehicle Identification Number (VIN): [9N-
4- 034001;] - Fitting Position: Right
- Number of connectors: 2
- Fitting Depth [mm]: 13.5
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Connector Shape: angular
- Mounting Type: Plugged
- Colour: grey
- Name: SN CTS154.05
- Manufacturer: SNR
- Fitting Position: Rear Axle
- Quantity: 2
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21285-
12B1 - Manufacturer: DELPHI
- General Information: Exterior temperature sensor
- Manufacturer: BORSEHUNG
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PT009309331
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Length [mm]: 24
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
AU- 029 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: Coolant temperature sensor; 2 pin; black; grey
- Manufacturer: BORSEHUNG
- Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Required quantity: 2
- Fitting Position: Rear Axle
- Total Length [mm]: 75.5
- Sensor Type: Hall Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU358218481
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- General Information: Coolant temperature sensor
- Manufacturer: BORSEHUNG
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Number of pins: 2
- Supplementary Article/Info 2: without cable
- Quantity per axle: 2
- Length [mm]: 76
- Braking/Driving Dynamics: for vehicles with ABS
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 2
- Fitting Position: Front Axle
- Sensor Type: Hall Sensor
- Total Length [mm]: 75.5
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Anduritüüp: NTC-
andur - Montaaživiis: Kruviühendus
- Pistikukatte kuju: ovaalne
- Pistikkontaktide arv: 2
- Pistiku värv: must
- OE-numbri jaoks: 06K919523
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: NRF
- Number of connectors: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Boost pressure sensor
- Manufacturer: VIKA
-
Fitting Position: Front,
Footwell - Vehicle Equipment: for vehicles with automatic climate control
- Number of pins: 2
- Connector Shape: angled
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Colour: black
- Shape: straight
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fitting Position: Front Axle Left,
Front Axle Right - Number of pins: 2
- Supplementary Article/Info 2: without cable
- Quantity per axle: 2
- Length [mm]: 81
- Braking/Driving Dynamics: for vehicles with ABS
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 11.2018
- Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV015
Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear
- Number of connectors: 2
-
Operating temperature from [°C]: -
10 - Operating temperature to [°C]: 50
- Connector Shape: angular
- Mounting Type: Plugged
- Colour: black
- Name: SN CTS154.01
- Manufacturer: SNR
-
Fitting Position: Front,
Rear, Centre - Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Connector Shape: rectangular
- Chemical Properties: Paintable
- for OE number: 5Q0919275B
- Manufacturer: DELLO AUTOMEGA
- Required quantity: 2
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Quantity: 2
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11473
- Fitting Position: Rear Axle
- pikkus üle kõige (mm): 70
- Manufacturer: BOSCH
- Fitting Position: Front Axle
- pikkus üle kõige (mm): 80
- Manufacturer: BOSCH
-
Vehicle Equipment: for vehicles with start-
stop function - Fitting Depth [mm]: 33.2
- Number of connectors: 3
- Number of mounting bores: 1
- Rated Voltage [V]: 12
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: oval
- Colour: black
- Name: SN CKP154.07
- Manufacturer: SNR
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 16.07.2018
- Connector Shape: D Shape
- Sensor Type: NTC Sensor
- Number of pins: 4
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PBT - Manufacturer: TOPRAN
Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Right,
Left - Fitting Depth [mm]: 24
- Number of connectors: 3
- Number of mounting bores: 1
- Rated Voltage [V]: 12
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: oval
- Colour: black
- Name: SN CMP167.01
- Manufacturer: SNR
- General Information: Air intake pressure sensor
- Manufacturer: BORSEHUNG
-
Fitting Position: Front,
Rear - Manufacturer: FAST
- Number of pins: 4
- Manufacturer: JPN
- Number of pins: 2
- Sensor Type: NTC Sensor
- Connector Shape: angled
-
Fitting Position: Air duct,
to interior blower -
Housing material: GRP
(Glass fibre Reinforced Plastic), PA 6 GF 30 - Always compare old and new part (in particular OE No.):
- Vehicle Equipment: for vehicles with air conditioning
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: DDWA
- Pistikkontaktide arv: 3
- Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
- Name: HE 6PU009168731
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.01
- Name: SW 33 10 8160
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
Rear - Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV096
- General Information: Crankshaft position sensor
- Manufacturer: VIKA
- Number of pins: 3
- Sensor Type: Hall Sensor
-
Supplementary Article/Info 2: with seal ring,
without cable - Connector Shape: oval
-
for OE number: 04C 907 601K,
958 907 601 00 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 2
- Engine Code: DDWA
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU009168401
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Required quantity: 1
- Manufacturer: BREMI
Manufacturer: NRF
- Number of pins: 3
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Connector Shape: oval
- Socket colour: black
- Overall Length [mm]: 58.5
- Supplementary Article/Info 2: without cable
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thread Size: 12 mm
- Manufacturer: VERNET
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Quantity: 2
- Sensor Type: Active sensor
- Number of occupied pins: 2
- Name: DE SS20794
- Manufacturer: DELPHI
-
Fitting Position: Front,
inner, outer - Block Separation:
- Colour Code: GRU
- Colour: black
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN HANS PRIES
for combined PR number: GP1+7X2+K8B, GP1+7X2+K8D, GP1+7X2+K8X, GP1+7X5+K8B, GP1+7X5+K8D, GP1+7X5+K8X, GP1+7X2+K8B+2K3, GP1+7X2+K8D+2K3, GP1+7X2+K8B+2K7, GP1+7X2+K8D+2K7, GP1+7X5+K8B+2K3, GP1+7X5+K8D+2K3, GP1+7X5+K8B+2K7, GP1+7X5+K8D+2K7 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: DDWA
- Length [mm]: 62
- Width [mm]: 54
- Height [mm]: 40
- Colour: black
- Number of connectors: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: Low Pressure Side
- Fuel Mixture Formation: Direct Injection
-
Fabrication Number: EFP-
AU- 004 - Manufacturer: NTY
-
Name: NTY EFP-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Manufacturer: DELPHI
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- General Information: Pressure difference sensor
- Manufacturer: VIKA
- General Information: Boost pressure sensor
- Manufacturer: BORSEHUNG
- Name: DRM 02440
- Manufacturer: DR.MOTOR AUTOMOTIVE
- General Information: Pressure difference sensor
- Manufacturer: BORSEHUNG
- Manufacturer: BOSCH
- Name: BS 0281002976
Manufacturer: BOSCH
-
Fitting Position: outer,
Rear, inner, Lateral Mounting, Front - Block Separation:
-
for PR number: 7X5,
7X2 - Colour Code: GRU
- Colour: black
- Surface: primed
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 300
- Manufacturer: VDO
- Number of pins: 4
- Pressure from [kPA]: 16
- Manufacturer: DELPHI
- General Information: Pressure difference sensor
- Manufacturer: BORSEHUNG
- Exhaust System: before soot particulate filter
- Number of pins: 3
- Opening pressure [kPa]: 50
-
Name: DE DPS00077-
12B1 - Manufacturer: DELPHI
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 300
- Manufacturer: FAE
- Kontrolltähistus: CE
- Tunnustäht: 1210
- Väändejõud [Nm]: 0
- Montaaživiis: pistetud
- Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
-
Piirangutega toode/piirangu info 2: koos kruviga,
koos klappidega - lubatud suurim kiirus (km/h): 210
-
Korpusevärv: must/
valge - Sagedusala [MHz]: 433
- Klapisäärematerjal: Kumm vasest riide lisamisega
- Ventiili värv: must
-
Name: SCH 1210-
GO1 - Manufacturer: SCHRADER
- Kontrolltähistus: CE
- Väändejõud [Nm]: 6
- Montaaživiis: kruvitud
- Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
-
Piirangutega toode/piirangu info 2: T-
kujulise soonega, koos klappidega - lubatud suurim kiirus (km/h): 250
- Sagedusala [MHz]: 433
- Klapisäärematerjal: Alumiinium
- Ventiili värv: hõbedane
-
Name: SCH 2200-
GO1 - Manufacturer: SCHRADER
- Kontrolltähistus: CE
- Väändejõud [Nm]: 6
- Montaaživiis: kruvitud
- Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
-
Piirangutega toode/piirangu info 2: T-
kujulise soonega, koos klappidega - lubatud suurim kiirus (km/h): 250
- Sagedusala [MHz]: 433
- Klapisäärematerjal: Alumiinium
- Ventiili värv: must
-
Name: SCH 2200B-
GO1 - Manufacturer: SCHRADER
- Kontrolltähistus: CE
- Väändejõud [Nm]: 6
- Montaaživiis: kruvitud
- Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
-
Piirangutega toode/piirangu info 2: T-
kujulise soonega, koos klappidega - lubatud suurim kiirus (km/h): 250
-
Korpusevärv: must/
valge - Sagedusala [MHz]: 433
- Klapisäärematerjal: Alumiinium
- Ventiili värv: titaan
-
Name: SCH 2200T-
GO1 - Manufacturer: SCHRADER
- Frequency Range [MHz]: 433
-
Valve colour: black,
silver - Tightening Torque [Nm]: 8
- Mounting Type: Bolted
-
Supplementary Article/Info 2: with groove,
with valves - Permissible maximum speed [km/h]: 250
- Housing Colour: black
- Manufacturer: SKF
Manufacturer: BOSCH
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without cable
- Length [mm]: 76.5
- MAPP code available:
- Manufacturer: ATE
- Required quantity: 2
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without cable
- Length [mm]: 80.8
- MAPP code available:
- Manufacturer: ATE
-
Fitting Position: Left Front,
Left Rear, Vehicle Door - Production date to: 30.07.2018
-
for PR number: 4F2,
4F6, 4I3 - Block Separation:
- Production date from: 30.07.2018
-
Vehicle Equipment: for vehicles with keyless Entry/
Go system - Number of pins: 2
- Connector Shape: oval
- Input Voltage [V]: 5
- Length [mm]: 113
- Width [mm]: 25
- Colour: black
- Manufacturer: TOPRAN
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles for combined PR number: 2F0+4F2, 2F0+4F6, 2F0+4I3, 2F1+4F2, 2F1+4F6, 2F1+4I3 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Right Front,
Right Rear, Vehicle Door - Production date to: 30.07.2018
-
for PR number: 4F2,
4F6, 4I3 - Block Separation:
- Production date from: 30.07.2018
-
Vehicle Equipment: for vehicles with keyless Entry/
Go system - Number of pins: 2
- Connector Shape: oval
- Input Voltage [V]: 5
- Length [mm]: 113
- Width [mm]: 25
- Colour: black
- Manufacturer: TOPRAN
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles for combined PR number: 2F0+4F2, 2F0+4F6, 2F0+4I3, 2F1+4F2, 2F1+4F6, 2F1+4I3 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: DDWA
- Montaaživiis: kruvitud
- Pistikkontaktide arv: 4
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- General Information: Exhaust pressure sensor
- Manufacturer: VIKA
Manufacturer: NRF
- Required quantity: 8
-
Fitting Position: both sides,
inner, Front, Rear - Number of pins: 3
-
Chemical Properties: Over-
paintable - Mounting Type: Plugged
- Socket colour: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA ELEKTRYKA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: DDWA
- Anduritüüp: Induktiivandur
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: ilma kaablita
- Manufacturer: VALEO
- Fitting Position: Rear Axle
- Length [mm]: 77
- Sensor Type: Active sensor
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front,
Rear, Centre - Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Chemical Properties: Paintable
- Connector Shape: angled
- Version: IAM
- Manufacturer: METZGER
- Kontrolltähistus: CE
- Väändejõud [Nm]: 0
- Montaaživiis: pistetud
- Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
-
Piirangutega toode/piirangu info 2: koos kruviga,
koos klappidega - lubatud suurim kiirus (km/h): 210
-
Korpusevärv: must/
valge - Sagedusala [MHz]: 433
- Klapisäärematerjal: Kumm vasest riide lisamisega
- Ventiili värv: must
- Manufacturer: SCHRADER
- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Length [mm]: 81
- Sensor Type: Active sensor
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- General Information: Pressure difference sensor
- Manufacturer: VIKA
- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG
- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG
- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
- Manufacturer: BOSCH
- Name: BS 0261545109
- Production date to: 29.05.2016
-
for PR number: 8N6,
8N8 - Housing Type: Synthetic Material Housing
- Number of pins: 3
- Diameter [mm]: 34
- Length [mm]: 69
- Width [mm]: 48
- Height [mm]: 16
- Connector Shape: angular
-
Glazing: with rain/
light sensor, with humidity sensor - Supplementary Article/Info 2: with adhesive film
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Supplementary Article/Info 2: without sensor
- Number of sensors: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
for PR number: T2A,
T2B - Fitting Position: Soot Particulate Filter
- Supplementary Article/Info 2: without connection line
- Manufacturer: METZGER
-
Required quantity: 2,
8 -
Fitting Position: outer,
inner, both sides, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 23
- Height [mm]: 28.7
- Number of pins: 3
- Diameter [mm]: 15.5
- Manufacturer: VALEO
- Name: VA 890019
- Additional information: 890019 VALEO
- Lisainfo: 890019 VALEO
Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking)
- Installatsiooni pool: ees
- Piirangutega toode/piirangu info 2: ilma andurita
- Andurite arv: 6
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front
- Supplementary Article/Info 2: without sensor
- for OE number: 8W0 971 095 A
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Required quantity: 2
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 23
- Height [mm]: 28.7
- Number of pins: 3
- Diameter [mm]: 15.5
- Manufacturer: VALEO
Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Fitting Position: outer, both sides, Front, Rear, lateral installation
- Quality class: Q
Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks