• for PR number: 1ZF
• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 62.3
• Width [mm]: 146
• Thickness [mm]: 17.2
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• for PR number: 1ZE, 1ZP
• Fitting Position: Front Axle
• Brake System: TRW
• Height [mm]: 64.5
• Width [mm]: 160
• Thickness [mm]: 20.3
• Wear Warning Contact: incl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: Filter Insert
• Diameter [mm]: 88
• Height [mm]: 70
• Inner Diameter 2 [mm]: 19
• Inner Diameter 3 [mm]: 18
• Net Weight [g]: 184
• Packaging height [cm]: 7.5
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: MAHLE KNECHT

• Width [mm]: 25
• Material: Plastic
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Driven Units: Water Pump
• Number of Teeth: 81
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.06
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Manufacturer: CONTITECH

• Construction Year to: 05.2015
• Driven Units: Water Pump
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 81
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Length [mm]: 405
• Name: Hammasrihm
• Manufacturer: GAT
• Additional information: 5682XS GATES
• Lisainfo: 5682XS GATES

• Driven Units: Water Pump
• Vehicle configuration line / variant: HT -CJZA
• for OE number: 04E121605L
• Number of Teeth: 81
• Width [mm]: 10
• Name: HAMMASRIHM
• Manufacturer: DAY

• Number of Teeth: 81
• Length [mm]: 405
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Driven Units: Water Pump
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• for PR number: 1ZF
• for brake disc diameter [mm]: 276
• Number of wear indicators [per axle]: 1
• Width [mm]: 146
• Height [mm]: 62.4
• Thickness [mm]: 17.5
• Manufacturer Restriction: ATE
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Outer Diameter [mm]: 70.5
• Width [mm]: 21
• Lisainfo: Tensioner Pulley, timing belt
• Additional information: Tensioner Pulley, timing belt

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 16
• Height [mm]: 56
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: ATE
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Additional information: JQ101187 KAMOKA
• Lisainfo: JQ101187 KAMOKA

• for PR number: 1KE
• Fitting Position: Rear Axle
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Width [mm]: 123
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with electric parking brake
• for PR number: 1KJ, 1KY, 1KZ, 2ED
• Fitting Position: Rear Axle
• Thickness [mm]: 16.4
• Brake System: ATE
• Width 1 [mm]: 123
• Width 2 [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Rim Size [inch]: 15
• for PR number: 1KE
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Brake System: ATE
• Width 1 [mm]: 123
• Width 2 [mm]: 123
• Thickness 1 [mm]: 16.2
• Thickness 2 [mm]: 16.2
• Manufacturer: JPN

• Fitting Position: Front Axle
• Width [mm]: 146
• Thickness [mm]: 16
• Height [mm]: 63
• Number of wear indicators [per axle]: 1
• Wear Warning Contact: incl. wear warning contact
• Brake System: Volkswagen
• Warning Contact Length [mm]: 155
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Lisainfo: JQ101351
• Additional information: JQ101351

• Driven Units: Camshaft
• Number of Teeth: 163
• Length [mm]: 1,141
• Width [mm]: 20
• Belts: with rounded tooth profile
• Manufacturer: KAMOKA

• for PR number: 1KE
• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Brake System: ATE
• Width 1 [mm]: 123
• Width 2 [mm]: 123
• Thickness 1 [mm]: 16.2
• Thickness 2 [mm]: 16.2
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Article number of recommended accessories: 27-0553
• Width [mm]: 123
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Width [mm]: 123
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Front Axle
• for PR number: 1ZA, 1ZD, 1ZE, 1ZP
• Brake System: Lucas / TRW
• Number of wear indicators [per axle]: 1
• Width [mm]: 160
• Height [mm]: 64.5
• Thickness [mm]: 20.4
• Warning Contact Length [mm]: 172
• Test Mark: ECE R90
• Wear Warning Contact: prepared for wear warning indicator
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Thickness [mm]: 15.5
• Test Mark: R90
• Width [mm]: 123
• Height 1 [mm]: 56.5
• Height 2 [mm]: 61.3
• Wear Warning Contact: without acoustic wear warning
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• for PR number: 1KE, 1KY
• Quantity per packing unit: 4
• Height 2 [mm]: 61.2
• Brake System: ATE
• Width [mm]: 123
• Thickness [mm]: 16.2
• Height 1 [mm]: 56.2
• Manufacturer: LPR

• Fitting Position: Rear Axle
• for PR number: 1KE, 1KY
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer Restriction: ATE
• Thickness [mm]: 16
• Length [mm]: 123
• Height 1 [mm]: 56
• Height 2 [mm]: 61
• Manufacturer: JPN

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Thickness [mm]: 16.4
• Test Mark: R90 Homologated
• Length [mm]: 123
• Height 1 [mm]: 56.1
• Height 2 [mm]: 61.1
• WVA Number: 25008, 25010
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

• Width [mm]: 20
• Number of Teeth: 163
• Belts: with rounded tooth profile
• Weight [kg]: 0.1
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1ZF
• Fitting Position: Front Axle
• Height [mm]: 62.2
• Thickness [mm]: 17.2
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 1
• directional:
• Brake System: Teves
• Width [mm]: 146
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Width [mm]: 21
• Material: Metal
• Outer Diameter [mm]: 70
• Manufacturer: KAMOKA

• Driven Units: Camshaft
• Number of Teeth: 163
• Length [mm]: 1,141
• Width [mm]: 20
• Tooth Pitch [mm]: 7
• Name: HAMMASRIHM
• Manufacturer: BOS

• for brake disc diameter [mm]: 300
• Fitting Position: Rear Axle
• Brake System: CONTINENTAL
• Width [mm]: 123
• Height [mm]: 56.2
• Thickness [mm]: 15.9
• Width 2 [mm]: 123
• Height 2 [mm]: 61.2
• Thickness 2 [mm]: 15.9
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 25009
• Weight [kg]: 1.09
• Manufacturer: VALEO KLOCKI

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Thickness [mm]: 16.4
• Test Mark: R90 Homologated
• Length [mm]: 123
• Height 1 [mm]: 56.1
• Height 2 [mm]: 61.1
• WVA Number: 25008, 25010
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• for PR number: 1KE, #KE
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.3
• Supplementary Article/Supplementary Info: without accessories, with spring
• Number of pads: 4
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: ECE R90 APPROVED
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -CJZA
• for OE number: 04E109119F
• Number of Teeth: 163
• Width [mm]: 20
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Left
• Diameter [mm]: 60
• Width [mm]: 21
• Tensioner Pulley Actuation: Automatic
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Length [mm]: 123.2
• Width [mm]: 61.4, 56.3
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.9
• Weight [kg]: 1.055
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 16995 FEBI
• Additional information: 16995 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: Teves, Continental
• for PR number: 1KY, 1KJ
• Quantity per packing unit: 4
• FMSI Code: D1761-8996
• Test Mark: E9 90R-02A0825/3924
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 25009, 25011
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 123.3
• Width 2 [mm]: 123.3
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness 1 [mm]: 15.9
• Thickness 2 [mm]: 15.9
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2697

• for PR number: 1KJ, 1KY, 1KZ, 2ED
• Vehicle Equipment: for vehicles with electric parking brake
• Length [mm]: 123
• Height [mm]: 56.2
• Height 1 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Fitting Position: Rear Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for PR number: 1ZF
• Fitting Position: Front Axle
• Width [mm]: 146
• Thickness [mm]: 17.5
• Height [mm]: 62.4
• Wear Warning Contact: incl. wear warning contact
• Brake System: Volkswagen
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• for PR number: 2ER, 2ET, 1KJ, 1KY, 1KZ
• for brake disc diameter [mm]: 310
• Quantity per packing unit: 4
• Test Mark: E9 90R-02A0118/3530
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer Restriction: ATE
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Quality class: PJ
• Name: Brake pads

• for PR number: 1ZA, 1ZD, 1ZE, 1ZP
• Fitting Position: Front Axle
• Width [mm]: 160
• Thickness [mm]: 20.4
• Height [mm]: 64.5
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, incl. wear warning contact

• for brake disc diameter [mm]: 272, 300
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 56.2
• Thickness [mm]: 15.9
• Width 2 [mm]: 123
• Height 2 [mm]: 61.2
• Thickness 2 [mm]: 15.9
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 25010, 25008
• Weight [kg]: 1.1
• Manufacturer: VALEO

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Length [mm]: 123
• Width [mm]: 61, 56
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16
• Weight [kg]: 1.055
• Observe service information:
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 288
• for PR number: 1ZE
• Thickness [mm]: 20.2
• Length [mm]: 160.1
• Height 1 [mm]: 65
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• WVA Number: 25086, 25684
• Fitting Position: Front Axle
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Rear Axle
• for PR number: 1KE
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO
• Lisainfo: QP7274
• Additional information: QP7274

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Length [mm]: 123.2
• Width [mm]: 61.4, 56.3
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.9
• Name: SW 30 91 6995
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KJ
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Width [mm]: 160
• Thickness [mm]: 19
• Height [mm]: 65
• Number of wear indicators [per axle]: 1
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• Warning Contact Length [mm]: 171
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for PR number: 1E7
• Filter type: without quick coupling
• Manufacturer: VAICO

• for PR number: 1ZE, 1ZP
• Height [mm]: 64.5
• Thickness [mm]: 20.3
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 1
• directional:
• Supplementary Article/Info 2: with brake caliper screws
• Brake System: TRW
• Fitting Position: Front Axle
• Width [mm]: 160
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Model Year from: 2017
• for PR number: 1LB
• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Height [mm]: 69.7
• Thickness [mm]: 20
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 1
• Warning Contact Length [mm]: 260
• directional:
• Observe technical data:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Rear Axle
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 56.3
• Height 2 [mm]: 61.2
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 123
• Width 2 [mm]: 123
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: METELLI UKL.HAMULCOWY

• for brake disc diameter [mm]: 300
• for PR number: 2ED
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Rim Size [inch]: 15.0
• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Width 1 [mm]: 123
• Height 1 [mm]: 55.2
• Thickness 1 [mm]: 16.3
• Width 2 [mm]: 123
• Height 2 [mm]: 61.2
• Thickness 2 [mm]: 16.3
• Brake System: ATE
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Brake System: Teves, Continental
• for PR number: 1KE
• Quantity per packing unit: 4
• FMSI Code: D1761-8990
• Test Mark: E9 90R-02A0825/4182
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 25010, 25008
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 123.2
• Width 2 [mm]: 123
• Height 1 [mm]: 61.3
• Height 2 [mm]: 50.9
• Thickness 1 [mm]: 16.2
• Thickness 2 [mm]: 16.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2490

• Quantity: 1
• Fitting Position: Front Axle
• Width [mm]: 146
• Thickness [mm]: 17.3
• Height [mm]: 62.4
• Material: Low-Metallic
• Supplementary Article/Info 2: with mounting manual
• General Information: Brake pad; front
• Manufacturer: VIKA

• Construction Year to: 04.2015
• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 272, 300, 310
• for PR number: 1KJ, 1KY, 1KZ, 2ER, 2ET
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.1
• Length [mm]: 123
• Height 1 [mm]: 56.3
• Height 2 [mm]: 61.3
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Lining: With bevelled edges
• Brake System: ATE
• WVA Number: 25009, 25011
• Manufacturer: SKF
• Name: SK VKBP90013

• for PR number: 1KE
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 16.2
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Brake System: ATE
• Weight [kg]: 1.25
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Rim Size [inch]: 17.0
• for PR number: 1KY
• Width 1 [mm]: 123
• Height 1 [mm]: 56.2
• Thickness 1 [mm]: 16.2
• Width 2 [mm]: 123
• Height 2 [mm]: 61.2
• Thickness 2 [mm]: 16.2
• Brake System: ATE
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.16
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• for OE number: 5Q0698451N
• General Information: Brake pad; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Width [mm]: 175
• Thickness [mm]: 20
• Height [mm]: 70
• Number of wear indicators [per axle]: 1
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas - TRW
• Warning Contact Length [mm]: 260
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 05.2015
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 163
• Width [mm]: 20
• Tooth Pitch [mm]: 7
• Length [mm]: 1,141
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Rear Axle
• for PR number: 1KE
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Width [mm]: 160.2
• Thickness [mm]: 20.4
• Height [mm]: 64.5
• Wear Warning Contact: incl. wear warning contact
• General Information: Brake pad; front; with wire
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for PR number: 1ZF
• Model Year to: 2016
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 146
• Height [mm]: 62.4
• Thickness [mm]: 17.5
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 1
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• General Information: Brake pad; front; with wire
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with electric parking brake
• for PR number: 1KJ, 1KY, 1KZ, 2ED
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Thickness [mm]: 16.2
• Width [mm]: 123
• Height [mm]: 61.4
• Height 1 [mm]: 56
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: OPTIMAL ZAWIESZENIE

• for brake disc diameter [mm]: 272
• for PR number: 1KE
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY
• Lisainfo: 0252500816/PD
• Additional information: 0252500816/PD

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Driven Units: Camshaft
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 70
• Width [mm]: 26
• Material: Steel
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• for PR number: 1ZE
• Manufacturer Restriction: TRW
• Thickness [mm]: 20.5
• Test Mark: R90
• Width [mm]: 160
• Height [mm]: 64.5
• Wear Warning Contact: with integrated wear sensor
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Brake System: ATE
• WVA Number: 25009
• Length 1 [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness 1 [mm]: 16
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• for PR number: 1ZA, 1ZK
• for brake disc diameter [mm]: 312
• Quantity per packing unit: 4
• Test Mark: E9 90R-02A0112/3374
• Supplementary Article/Supplementary Info: with accessories
• Wear Warning Contact: incl. wear warning contact
• Warning Contact Length [mm]: 170
• Manufacturer Restriction: TRW
• Width [mm]: 160.2
• Height [mm]: 64.5
• Thickness [mm]: 20.4
• Number of wear indicators [per axle]: 1
• Quality class: PJ
• Name: Brake pads

• for PR number: 1ZE, 1ZA, 1ZP, 1ZD
• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Height 1 [mm]: 64.6
• Brake System: TRW
• Width 1 [mm]: 160.1
• Thickness 1 [mm]: 19.9
• Manufacturer: PROFIPOWER

• for brake disc diameter [mm]: 288, 312
• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 160
• Height [mm]: 64.5
• Thickness [mm]: 20
• Number of wear indicators [per axle]: 1
• Warning Contact Length [mm]: 170
• Supplementary Article/Info 2: with anti-squeak plate
• Vibration: with vibration damper
• Test Mark: ECE-R90
• WVA Number: 25086, 25683, 25684
• Weight [kg]: 2
• Name: VA 302145
• Manufacturer: VALEO

Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact

• Fitting Position: Front Axle
• for PR number: 1LB
• Wear Warning Contact: incl. wear warning contact
• Thickness [mm]: 20
• Width [mm]: 175
• Height [mm]: 70
• Number of wear indicators [per axle]: 1
• Brake System: Lucas / TRW
• Warning Contact Length [mm]: 185
• Manufacturer: JPN