• Number of Teeth: 28
• Housing Type: without housing
• Impeller Diameter [mm]: 63
• Manufacturer: KAMOKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Manufacturer: BGA

• Operating Mode: Electric
• Fabrication Number: CPZ-VW-005
• Manufacturer: NTY

• Number of blades/vanes: 6
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without thermostat
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)"

• Material: Plastic
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.37
• Number of connectors: 3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Housing Type: without housing
• Number of Teeth: 28
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal, do not use sealant
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Manufacturer: GRAF POMPY WODY

• Number of Teeth: 28
• Operating Mode: Mechanical
• Housing Type: without housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of blades/vanes: 6
• Belt Pulley Ø [mm]: 49.5
• Number of Gaskets/Seals/Seal Rings: 2
• Manufacturer: OPTIMAL ZAWIESZENIE

• General Information: Water pump valve
• Manufacturer: VIKA

• Pulleys: with belt pulley
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• General Information: Water pump; half complete
• Manufacturer: VIKA

• Voltage [V]: 12
• for OE number: 5Q0965567
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: BGA

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):

• Operating Mode: Mechanical
• for OE number: 04E121600CS
• Manufacturer: SASIC

• Housing Type: without housing
• Packaging length [cm]: 21
• Packaging width [cm]: 17.1
• Packaging height [cm]: 15.1
• Weight [kg]: 0.882
• Manufacturer: AKSDASIS

• Fabrication Number: CPZ-VW-019
• Operating Mode: Electric
• Manufacturer: NTY

• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Operating Mode: Electric
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Production date to: 27.08.2012
• Operating Mode: Mechanical
• Number of Gaskets/Seals/Seal Rings: 2
• Water Pump Type: for timing belt drive
• Supplementary Article/Info 2: with gear, without coolant regulator
• Number of Teeth: 28
• Housing Type: Aluminium Housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Observe system fill quantity:
• New Part:
• Used part return not required:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA555A

• Housing Type: with housing
• Manufacturer: BGA

• Voltage [V]: 12
• for OE number: 5Q0965561C
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.924
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for model code: 8VA/8VF
• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Length [mm]: 435
• Number of Teeth: 87
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Driven Units: Water Pump
• Name: BS 1987946958
• Manufacturer: BOSCH

• Weight [kg]: 1.154
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Manufacturer: CONTITECH

• Housing Type: without housing
• Weight [kg]: 0.94
• Manufacturer: DOLZ
• Name: DO A234

• Operating Mode: Mechanical
• Lisainfo: Water Pump
• Additional information: Water Pump

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2020
• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Number of Teeth: 81
• Width [mm]: 10
• Number of belts: 1
• for article number: A239
• Manufacturer: DOLZ POMPY WODY

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: without holder
• Manufacturer: BOSCH

• Driven Units: Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Number of Teeth: 87
• Weight [kg]: 1.374
• Width 1 [mm]: 10
• Housing Type: without housing
• Manufacturer: CONTITECH
• Additional information: CT1169WP1
• Lisainfo: CT1169WP1

• Fabrication Number: CPZ-VW-022
• Operating Mode: Electric
• Manufacturer: NTY

• Construction Year to: 10.2018
• Water Pump Type: for toothed belt driven power take-off
• Belt Width [mm]: 10
• for OE number: 04E 121 605 E
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 87
• Manufacturer: SKF
• Name: SK VKPC81341

• Water pump impeller material: Plastic
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, Thermostat fitted in water pump
• Number of Teeth: 28
• Technical Information: SKF Aquamax
• Name: SK VKPA81341
• Manufacturer: SKF

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Name: SW 33 10 3305
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 27.08.2012
• Production date to: 27.05.2013
• Operating Mode: Mechanical
• Number of Teeth: 28
• Supplementary Article/Supplementary Info: with gaskets/seals, with integrated regulator
• Water Pump Type: for timing belt drive
• Housing Type: Aluminium Housing
• Water pump impeller material: Plastic
• Impeller Diameter [mm]: 63
• Number of bolts/screws: 10
• Opening Temperature [°C]: 105, 87
• New Part:
• Used part return not required:
• Number of blades/vanes: 6
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with gear, with seal ring, with bolts/screws, with coolant regulator, with lid, Coolant temperature sensor fitted into water pump housing General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Driven Units: Water Pump
• Vehicle configuration line / variant: HT -MC 8VF CZEA
• Number of Teeth: 87
• Width [mm]: 10
• Length [mm]: 435
• Full Set:
• Number of belts: 1
• Weight [kg]: 1.8
• Supplementary Article/Info 2: Thermostat fitted in water pump
• Name: DA KTBWP12120
• Manufacturer: DAYCO

• Pulleys: with belt pulley
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• General Information: Water pump assembly; 5 tube
• Manufacturer: VIKA

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: without coolant regulator
• Number of blades/vanes: 6
• Manufacturer: HEPU

• Operating Mode: Electric
• Voltage [V]: 12
• Weight [kg]: 0.4
• Packaging length [cm]: 20
• Packaging width [cm]: 10
• Packaging height [cm]: 10

• Manufacturer Restriction: BOSCH
• Manufacturer: YSPARTS

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5G0 965 567
• Supplementary Article/Supplementary Info: with holder
• Flow rate [l/h]: 500
• Manufacturer: HEPU

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: with holder
• Manufacturer: BOSCH

• Supplementary Article/Info 2: with thermostat
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: DR MOTOR

• for OE number: 5Q0 965 567
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT ->05/18
• Number of Teeth: 163
• Width [mm]: 20
• Length [mm]: 1,141
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Length 1 [mm]: 405
• Number of belts: 2
• 2 Belts:
• Pulleys contained: 2
• Weight [kg]: 1.9

• Housing Type: with housing
• Cooling Hose: from connecting pipe to engine cooler
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.522
• Manufacturer: AKSDASIS

• Housing Type: with housing
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.44
• Manufacturer: AKSDASIS

• Number of track rollers: 2
• Number of belts: 2
• Width 1 [mm]: 20
• Number of Teeth: 163
• Manufacturer: SNR
• Name: SN KDP457.751

• New Part:
• Vehicle type: 8VA
• Housing Type: with housing
• Weight [kg]: 1.54
• Manufacturer: DOLZ
• Name: DO A239

• Housing Type: with housing
• Weight [kg]: 1.53
• Manufacturer: DOLZ
• Name: DO A235

• Construction Year to: 10.2020
• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Supplementary Article/Info 2: with clip
• Operating Mode: Electric
• Manufacturer: GATES

• Engine Code: CZEA
• for OE number: 04E 121 600 CD
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with thermostat, with coolant regulator
• Manufacturer: PIERBURG

• Production date to: 26.08.2012
• Operating Mode: Mechanical
• Number of Teeth: 28
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Gaskets/Seals/Seal Rings: 1
• Water Pump Type: for timing belt drive
• Housing Type: Aluminium Housing
• Water pump impeller material: Plastic
• Impeller Diameter [mm]: 63
• Opening Temperature [°C]: 80, 105
• New Part:
• Used part return not required:
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Number of blades/vanes: 7
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with gear, without belt, with coolant regulator, Coolant temperature sensor fitted into water pump housing General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Water Pump Type: for toothed belt driven power take-off
• Housing Type: with housing
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA NAPINACZE

• Construction Year to: 10.2018
• Number of bolts/screws: 1
• Water pump impeller material: Metal
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth 1: 163
• Number of Teeth 2: 87
• Width 1 [mm]: 20.1
• Width 2 [mm]: 10
• Manufacturer: SKF NAPINACZE POMPY

• Construction Year to: 10.2020
• Driven Units: Camshaft, Water Pump
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Housing Type: with housing
• Number of Teeth 1: 163
• Width 1 [mm]: 20
• Supplementary Article/Info 2: with lid
• Manufacturer: METELLI ROZRZAD

• Engine Code: CZEA
• Emission Standard: Euro 6
• Block Separation:
• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Aluminium
• Number of Teeth: 28
• Supplementary Article/Info 2: with thermostat
• Number of blades/vanes: 6
• Weight [kg]: 1.53
• Housing Type: with housing
• for OE number: 04E 121 600 CS
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: Water pump; with toothed belt; 1.4T
• Manufacturer: BORSEHUNG

• Water Pump Type: for timing belt drive
• Housing Type: with housing
• Pulleys: with belt pulley
• Opening Temperature [°C]: 87, 97
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538036310

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: Synthetic Material Housing
• Manufacturer: HEPU

Supplementary Article/Info 2: with thermal management module, with bore for sensor

• General Information: Water pump assembly
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: without thermostat, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU

• Number of Teeth: 87
• Opening Temperature [°C]: 105, 80
• Housing Type: with housing, Synthetic Material Housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, with thermostat, with bolts/screws
• for OE number: 04E 121 605 E
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: Thermostat fitted in water pump, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU

• Construction Year to: 10.2020
• Driven Units: Camshaft, Water Pump
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Supplementary Article/Supplementary Info: with water pump
• Supplementary Article/Info 2: with thermostat
• Observe technical data:
• Manufacturer: GATES-ZESTAWY