Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
-
API specification: GL-
5 - Colour: yellow
- Capacity [litre]: 1
-
SAE viscosity class: 75W-
90 - Weight [kg]: 0.9
- Observe service information:
- Name: KASTIOLI
- Manufacturer: FEB
- Lisainfo: 32590 FEBI
- Additional information: 32590 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Colour: yellow
- Capacity [litre]: 1
-
SAE viscosity class: 75W-
85 - Weight [kg]: 0.9
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: yellow
- Capacity [litre]: 0.85
-
Specification: VW TL 52175-
Y - Weight [kg]: 0.8
- Observe service information:
-
Name: OLI,
HALDEX- SIDUR - Manufacturer: FEB
- Lisainfo: 101172 FEBI
- Additional information: 101172 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
API specification: GL-
5 - Colour: yellow
- Capacity [litre]: 5
-
SAE viscosity class: 75W-
90 - Weight [kg]: 4.68
-
Manufacturer: FEBI-
OLEJE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with oil drain plug
- Clutch Type: for wet clutch
-
Recommended change interval [km]: 30,
000 - Recommended change interval [years]: 3
-
Clutch ID: HALDEX GEN IV /
4, HALDEX GEN V / 5 - Capacity [litre]: 0.85
- Oil manufacturer recommendation: G 060 175 A2
- Manufacturer: VAICO
Supplementary Article/Info 2: without filter, with oil quantity for standard oil change, without strainer General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Clutch Type: for wet clutch
-
Filter type: with housing cover,
Filter Insert -
Clutch ID: HALDEX GEN IV /
4 -
Recommended change interval [km]: 30,
000 - Supplementary Article/Supplementary Info: with oil drain plug
- Quantity Unit: Set
- Recommended change interval [years]: 3
- Fitting Position: Rear Axle
- Capacity [litre]: 0.85
- Name: ZESTAW DO WYMIANY OLEJU VW HALDEX
- Manufacturer: VAI
Supplementary Article/Info 2: with bolts/screws, with seal ring, with filter, with oil quantity for standard oil change, without strainer General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with oil drain plug,
with strainer - Clutch Type: for wet clutch
- Filter type: Screen Filter
-
Recommended change interval [km]: 30,
000 - Recommended change interval [years]: 3
-
Clutch ID: HALDEX GEN V /
5 - Capacity [litre]: 0.85
- Oil manufacturer recommendation: G 060 175 A2
- Name: ZESTAW DO WYMIANY OLEJU VW HALDEX Z OLEJEM
- Manufacturer: VAI
Supplementary Article/Info 2: with filter, with oil quantity for standard oil change General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks