Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thread Size: M10x1
- Length [mm]: 46
- Spanner Size: 24
- Colour Coding: white
- Number of pins: 1
- Manufacturer: DELLO AUTOMEGA
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Colour Coding: blue
- Number of connectors: 1
- External Thread [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Switch point from [bar]: 1.6
- Switch point to [bar]: 2
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Engine Code: ABK
- Colour: blue
- Pressure [bar]: 0.3
- Thread Size: M10x1
- Spanner Size: 24
- Name: EP 1.800.108
- Manufacturer: EPS
-
Additional information: 1-
800- 108 -
Lisainfo: 1-
800- 108
- Engine Code: ABK
- Colour: blue
- Pressure [bar]: 0.3
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Quantity: 1
-
Surface: Zinc-
coated -
Control Range [bar]: 0,
15 - 0, 35 - Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Thread Length [mm]: 13
- Inner Diameter [mm]: 2.54
- Spanner Size: 24
- Supplementary Article/Info 2: with seal ring
- Colour Coding: blue
- Length [mm]: 46
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Thread Size: M 10x1
- Housing Colour: black
- Pressure [bar]: 0.4
- Manufacturer: FAE
- Switch point from [bar]: 0.15
- Length [mm]: 46
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 028 919 081 D
- Thread Size: M10 x 1
- Colour: blue
- Switch point from [bar]: 0.15
- Switch point to [bar]: 0.35
- Manufacturer: TRUCKTEC
- Thread Size: M 10x1
- Housing Colour: white
- Pressure [bar]: 1.8
- Manufacturer: FAE
- Manufacturer: AIC
- Lisainfo: 51913 AIC
- Additional information: 51913 AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Switch point from [bar]: 0.15
- Length [mm]: 46
- Switch point to [bar]: 0.35
- Inner Diameter [mm]: 2.54
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
-
Surface: Zinc-
coated - Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 23 0002
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M 10x1
- Housing Colour: black
- Pressure [bar]: 1.4
- Manufacturer: FAE ELEKTRYKA
- Switch point from [bar]: 1.6
- Length [mm]: 46
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure [bar]: 3.5
- Housing Colour: blue
- Thread Size: M10×1.6
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: DE SW90009
- Lisainfo: SW90009
- Additional information: SW90009
- Pressure [bar]: 1.8
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Switch Pressure [bar]: 1.8
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET
- Number of pins: 1
- Pressure [bar]: 0.3
- Thread Size: M10X1
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Corresponds to the original part in colour: black,
brown - Spanner Size: 24
- Version: Neue Version
- Manufacturer: METZGER
- Engine Code: ABK
- Colour: white
- Pressure [bar]: 1.8
- Thread Size: M10x1
- Spanner Size: 24
- Name: EP 1.800.045
- Manufacturer: EPS
- Engine Code: ABK
- Colour: white
- Pressure [bar]: 1.8
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Switch point from [bar]: 1.6
- Length [mm]: 46
- Switch point to [bar]: 2
- External Thread Size: M10 x 1
- Thread Length [mm]: 13
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: white
-
Surface: Zinc-
coated - Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 23 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: blue
- Shifting Points [bar]: 0.25
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pressure [bar]: 0.3
- Thread Size: M10 x 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Thread Size: M10x1,
0 -
Control Range [bar]: 0,
15 - 0, 35 - Colour: blue
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 0.25
- Thread Size: M10 x 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Thread Size: M 10x1
- Colour: brown
- Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.25
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Thread Size: M10x1,
0 - Colour: white
- Pressure from [bar]: 1.6
- Pressure to [bar]: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 1
- Pressure [bar]: 0.3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: M10 x 1
- Spanner Size: 14
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 1
- Colour Coding: blue
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connecting thread: M10 x 1
- Manufacturer: ERA
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.15
- Pressure to [bar]: 0.35
- Number of pins: 1
- Plug Type: Blade Terminal
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6ZL003259641
- Engine Code: ABK
- Number of pins: 1
- Housing Colour: blue
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: blue
- Name: EP 1.830.093
- Manufacturer: EPS
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 1.6
- Pressure to [bar]: 2
- Number of pins: 1
- Corresponds to the original part in colour: Milk White
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6ZL003259441
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 1.2
- Pressure to [bar]: 1.6
- Number of pins: 1
- Plug Type: Blade Terminal
- Corresponds to the original part in colour: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6ZL003259471
- Observe technical data:
- Manufacturer: BOSCH
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M10x1
- Manufacturer: FAE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks