Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Manufacturer: JP GROUP
-
Lisainfo: Connecting link for stabilizer,
front -
Additional information: Connecting link for stabilizer,
front
- Diameter [mm]: 18
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.085
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 8A...L...045001
- Rod/Strut: Coupling Rod
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 270
- Pipe Ø [mm]: 9
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
both sides - Rod/Strut: Coupling Rod
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle Left
- Rod/Strut: Coupling Rod
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle Right
- Rod/Strut: Coupling Rod
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Guide Rod
- Quantity Unit: Set
- Material: Steel
- Quality class: PJ
- Name: Stabilizer link left=right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Right,
Front Axle Left - Rod/Strut: Coupling Rod
- Base body material: Steel
- Replace in pairs only:
- Supplementary Article/Info 2: with nut
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Width [mm]: 37
- Height [mm]: 100
- Weight [kg]: 0.357
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - Max. Length [mm]: 320
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 272
- Thread Size 2: M10x1.5
- Weight [kg]: 0.35
-
Name: DY 30-
51372 - Manufacturer: DYS
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
-
Thread Size: M10 x 1,
5 - Length [mm]: 271
- Pipe Ø [mm]: 9
- Name: ALT 78262AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Manufacturer: DELPHI
- Name: DE TL359
- Fitting Position: Rear Axle Left
- Rod/Strut: Coupling Rod
- Length [mm]: 226
- Diameter [mm]: 10
- Thread Size 2: M10x1.5
-
paired article number: 30-
51629 - Weight [kg]: 0.4
-
Name: DY 30-
51630 - Manufacturer: DYS
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 341007
- Rod/Strut: Coupling Rod
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: SKF
- Model Year from: 1992
- Fitting Position: Front Axle
- Weight [kg]: 0.448
- Rod/Strut: Suspension Rod
- Packaging length [cm]: 31.3
- Packaging width [cm]: 7
- Packaging height [cm]: 4.3
- Manufacturer: FEBEST
- Length [mm]: 269.5
- Material: Plastic
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.12
-
Supplementary Article/Info 2: with self-
locking nut - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rod/Strut: Coupling Rod
- Length [mm]: 269.5
- Thread Size: M10x1.5
- Pipe Ø [mm]: 9
-
Fitting Position: Front Axle,
both sides, outer - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Weight [kg]: 0.167
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
both sides - Rod/Strut: Suspension Rod
- Replace in pairs only:
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks